how to build a professional studio
-
- KVRist
- 479 posts since 27 Apr, 2005 from Ireland
http://www.kushaudio.com/mediaUBKFatsodemo.html#
On your budget I'd definitely get one of these machines.
On your budget I'd definitely get one of these machines.
-
- KVRist
- 459 posts since 30 Jul, 2002 from netherlands
I think I quoted this before but this is what Steve Albini says about Shure sm57's :jak666 wrote:what about mixer and preamp?
i was thinking about this microphones setup
nuemann u 87
shure sm 57 x2
shure sm 58
KRK V88
AKG C-414 B TL II x 2
AKG D112
Neumann KM184
how many preamps do i need?
how many compressor/limiter?
as audio device i was thinking about MOTU 828 MKII
I tend to agree with that. I've got two myself and have hardly used them. They're just boring, boxy sounding dynamics. There are much better ones nowadays. They just got this reputation because they are very durable (another engineer joked that they were handy for driving nails in when there's no hammer around)Steve Albini wrote:Piece of shit dynamic mic some people are inexplicably crazy about, so we bought one. Sounds equivalently good on everything from snare drum to electric guitar. Unfortunately, not a very high standard of "Good." If you need to record something and there's no microphone available, this will do, I guess.
Apparantly Shure SM7 is a very good dynamic mic. And Steve Albini recommends the Beyer M201 for the purposes commonly associated with the Shure SM57 (recording snare mostly and sometimes miking amps or rocksingers with a kind of raw sound)
You will need as many preamps as you are planning to use mics that need them at the same time. So in recording drums that would be already two for the overhead-condensers.
Concerning limiting and compression; I would built the studio following the sound; soundsource->microphone->preamp->soundcard-or-whatever-they-call-the-thing-that-gets-the-sound-into-the-computer->audiosequencer
To use hardwaregear in the mixingstage you would have to get the sound out of the computer again. Personally I would start with making the best recordings possible using good hardware and once the tracks are recorded stay "in the box" using software first (and maybe expand to outboard gear at a later stage when you feel it's really needed)
Last edited by monopoli on Sun Nov 08, 2009 1:18 pm, edited 1 time in total.
-
- Banned
- 3299 posts since 20 Dec, 2008
Out of interest, what music style do you write and what gear have you got already?
-
- Banned
- 3299 posts since 20 Dec, 2008
2K ?popmoney wrote:http://www.kushaudio.com/mediaUBKFatsodemo.html#
On your budget I'd definitely get one of these machines.
- KVRAF
- 44205 posts since 11 Aug, 2008 from clown world
The intelligent way to build any studio is to decide on your preferred working method first. These are the foundations. You know how much money you're willing to spend, so you can 'budget'. Being careful only to purchase items that you need. I probably sounded a bit negative when I said that 15,000 won't get you far. It sounds like a lot of money but spend 5, 6 or 7 hundred on a DAW. Get a Computer. Get headphones. Get a soundcard. Get decent monitoring. Get a few quality sample sets. Get an editor. And so on, and so forth. You can easily spend twice that amount, and still not be fully equipped. There are some good deals going at the moment, so you're in with a chance but you'll need to be very, very careful. Seeking advice on a Forum like KvR is a wise thing to do. I salute you for that!
-
- KVRist
- Topic Starter
- 42 posts since 9 Sep, 2009
so... do i need some compressor on drums recording? or some limiter?monopoli wrote:I think I quoted this before but this is what Steve Albini says about Shure sm57's :jak666 wrote:what about mixer and preamp?
i was thinking about this microphones setup
nuemann u 87
shure sm 57 x2
shure sm 58
KRK V88
AKG C-414 B TL II x 2
AKG D112
Neumann KM184
how many preamps do i need?
how many compressor/limiter?
as audio device i was thinking about MOTU 828 MKII
I tend to agree with that. I've got two myself and have hardly used them. They're just boring, boxy sounding dynamics. There are much better ones nowadays. They just got this reputation because they are very durable (another engineer joked that they were handy for driving nails in when there's no hammer around)Steve Albini wrote:Piece of shit dynamic mic some people are inexplicably crazy about, so we bought one. Sounds equivalently good on everything from snare drum to electric guitar. Unfortunately, not a very high standard of "Good." If you need to record something and there's no microphone available, this will do, I guess.
Apparantly Shure SM7 is a very good dynamic mic. And Steve Albini recommends the Beyer M201 for the purposes commonly associated with the Shure SM57 (recording snare mostly and sometimes miking amps or rocksingers with a kind of raw sound)
You will need as many preamps as you are planning to use mics that need them at the same time. So in recording drums that would be already two for the overhead-condensers.
Concerning limiting and compression; I would built the studio following the sound; soundsource->microphone->preamp->soundcard-or-whatever-they-call-the-thing-that-gets-the-sound-into-the-computer->audiosequencer
To use hardwaregear in the mixingstage you would have to get the sound out of the computer again. Personally I would start with making the best recordings possible using good hardware and once the tracks are recorded stay "in the box" using software first (and maybe expand to outboard gear at a later stage when you feel it's really needed)
what about mixers?
- KVRAF
- 24456 posts since 7 Jan, 2009 from Croatia
You can do effects in software form anyways.
If I had 15k euros, I'd first do the room acoustics, then get some very decent monitors+subs, then several control surfaces (4x Behringer BCF2000 doesn't sound bad at all), then a great DAW computer (i7 of course), with 3 widescreen monitors. Preamps? Well, maybe a stereo channel strip with preamps and compressor built in, but that one purely for vocals and some stereo miking if needed. A great audio interface would suffice for me, and I'm thinking MOTU 828mkII or mkIII, Tascam US1641, or Apogee stuff.
Drums... I'd use electronic drumkit and trigger some sample libraries (for example Addictive drums, Superior 2.0...) - much less hassle over drum production and much more control. Much easier editing too
Mics... I'd get quite a few of those, for different purposes. SM57, Rode NT series, 2x Oktava MK012 (those work great in stereo), AKG D112 for bass cabs, etc.
I'd also get a decent MIDI controller/synthesizer, and Kurzweil PC3x is on top of that list, coupled with something like Korg nanoPAD for quick and dirty drum input, XY pad jackoffs etc.
I guess there goes your 15k, if you were me
If I had 15k euros, I'd first do the room acoustics, then get some very decent monitors+subs, then several control surfaces (4x Behringer BCF2000 doesn't sound bad at all), then a great DAW computer (i7 of course), with 3 widescreen monitors. Preamps? Well, maybe a stereo channel strip with preamps and compressor built in, but that one purely for vocals and some stereo miking if needed. A great audio interface would suffice for me, and I'm thinking MOTU 828mkII or mkIII, Tascam US1641, or Apogee stuff.
Drums... I'd use electronic drumkit and trigger some sample libraries (for example Addictive drums, Superior 2.0...) - much less hassle over drum production and much more control. Much easier editing too
Mics... I'd get quite a few of those, for different purposes. SM57, Rode NT series, 2x Oktava MK012 (those work great in stereo), AKG D112 for bass cabs, etc.
I'd also get a decent MIDI controller/synthesizer, and Kurzweil PC3x is on top of that list, coupled with something like Korg nanoPAD for quick and dirty drum input, XY pad jackoffs etc.
I guess there goes your 15k, if you were me
-
- Banned
- 3299 posts since 20 Dec, 2008
I'm sorry, but if you're asking these type of fundamental questions, I really do question your wisdom in going out and spending $22,000 on a studio set upjak666 wrote:so... do i need some compressor on drums recording? or some limiter?
Would it not be more sensible to buy a few basics and add to it as you go; as you get more experienced? After all, once you've spent it, there's no getting it back. I think people who suggest get this, get that are irresponsible imo.
Just my thoughts.
-
- KVRist
- 479 posts since 27 Apr, 2005 from Ireland
I disagree with that claim sir.yellowfever wrote:2K ?popmoney wrote:http://www.kushaudio.com/mediaUBKFatsodemo.html#
On your budget I'd definitely get one of these machines.Bootsie's Density Mk2 does what that can and it's free
Pistols at dawn
-
- KVRAF
- 2317 posts since 11 Mar, 2003
i'm thinking decent monitoring like PMC speakers would do you no harm. Once you have them you don't feel the need to upgrade. i never have in the 15 years i've had mine. Obviously the right model depends on the size of the room and with a decently sized pair you won't need a sub (unless you're doing 5.1 mixes).
Italian distributer:
Feel Communications srl
Via Andorra,
24 35127 Padova Italy
Ph: +39 49 870 1075
Fax: +39 49 870 2083
mbaratto@feel.it
http://www.feel.it
Italian distributer:
Feel Communications srl
Via Andorra,
24 35127 Padova Italy
Ph: +39 49 870 1075
Fax: +39 49 870 2083
mbaratto@feel.it
http://www.feel.it
-
- Banned
- 3299 posts since 20 Dec, 2008
Aloysius wrote:Handbags at dawn!
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 37262 posts since 27 Jul, 2005 from Scottish Borders
-
- KVRist
- Topic Starter
- 42 posts since 9 Sep, 2009
i was thinking about this set up
MIC
Audix D6
Audix D4
Sennaiser 421
451B AKG
AKG C414 B-XLS (x2)
Nuemann u 87
Apex 460 (x2)
shure sm57 (x2)
PREAMP
FCF SB100 Stereo
API 512C x 6
BEHRINGER MINI AMP800
COMPRESSOR
DBX 266XL (x2)
MONITORING
KRK V8 II
AKG K141 (x3)
MIC
Audix D6
Audix D4
Sennaiser 421
451B AKG
AKG C414 B-XLS (x2)
Nuemann u 87
Apex 460 (x2)
shure sm57 (x2)
PREAMP
FCF SB100 Stereo
API 512C x 6
BEHRINGER MINI AMP800
COMPRESSOR
DBX 266XL (x2)
MONITORING
KRK V8 II
AKG K141 (x3)

