u-he

zvenx · Post by **zvenx** » Wed Nov 25, 2009 10:59 pm

I am curious to know if at this point urs is saying.. damn maybe 333 spaghetti weren't enough

..
this really sounds good. Already working on a lil jam with it...

of course they are the usual anal retentive stuff, like some patches sound off key, some descriptions have typos, some lil graphic glitches in large mood..... but all in all a fantastic piece of synth....someone said above they figured they would not be buying anymore software synths for awhile cause they had enough.. I felt the same way, till I tried the demo...
Really great stuff.....cpu heavy on some patches but I just avoid them or use them very sparingly.... but the sound? mmmmmmm mmmmmm great.
rsp

rob_lee · Post by **rob_lee** » Wed Nov 25, 2009 11:04 pm

hi zvenx

to save cpu i set the quality to standard/good.also some of the presets have drift etc applied and meant to be a bit off key

typo errors? hmm i never did like school

anyway we're still polishing a few things up but all is going well.

cheers

rob

fceramic · Post by **fceramic** » Wed Nov 25, 2009 11:07 pm

Does Ace it's own official thread? If not please make one and post the download links and the promotional coupon.

BTW this synth is completely mindblowing. Crystal clear oscillators and incredibly punchy envelopes. This is truly a step forward in the softinstrument arena.

funkychickendance · Post by **funkychickendance** » Wed Nov 25, 2009 11:18 pm

fridtjof wrote:Does Ace it's own official thread? If not please make one and post the download links and the promotional coupon.

There was a promotional coupon? Oh well, missed that...

mellotronaut · Post by **mellotronaut** » Wed Nov 25, 2009 11:18 pm

preset Rob Lee - Fat Squares

when i change from accurate or standard to draft, the sound changes significantly to a very unpleasant high hissie missie.

Very nice sounding synth, could be the best vsti for basses and leads, but only for new and very powerful puters in accurate mode.

m

rodgetkfp · Post by **rodgetkfp** » Wed Nov 25, 2009 11:24 pm

"but the sound? mmmmmmm mmmmmm great. "

And this is, what it is all about.

Support the urs stuff,
really (more than) well sounding stuff.

Thank you Mr. Heckmann, once again..

Greetings,

Rodge

rob_lee · Post by **rob_lee** » Wed Nov 25, 2009 11:31 pm

mellotronaut wrote:preset Rob Lee - Fat Squares

when i change from accurate or standard to draft, the sound changes significantly to a very unpleasant high hissie missie.

Very nice sounding synth, could be the best vsti for basses and leads, but only for new and very powerful puters in accurate mode.

m

hi

yes i had that hissie also whilst trying to save cpu on some of my presets by changing the quality.
some would only work ok like the one you mention in "accurate/good" mode.
standard and draft etc only work effectively for me on the pads etc and on my machine which is a Q6600 dated hehe.

not sure if any future version will be cpu friendly but im managing ok upto now.

cheers

rob

fceramic · Post by **fceramic** » Wed Nov 25, 2009 11:38 pm

Urs wrote:
Dunc wrote:Should have known you would beat anyone to posting the link to the manual

No pressure, but my hand is hovering over my money (just been paid today...I hope).

Look out for "Spaghetti". This will be the promo code for the intro sale. It'll work 333 times - so there'll be plenty for x-mas.

zvenx · Post by **zvenx** » Wed Nov 25, 2009 11:44 pm

found another minor bug:
if in any bank you choose the first preset and mark it as junk and say hide junk... it still shows.... if you mark any other preset in that bank as junk it works fine.
also, if you mark the first one as junk, you can't with the use of mouse click and load the last preset of that bank, you have to use the scroll arrows on the gui.
thanks
rsp

autodafe · Post by **autodafe** » Wed Nov 25, 2009 11:53 pm

just bought and had some spaghetti too

share-it was instant. downloading now, it's abit too late to test it but I'll do my best

mellotronaut · Post by **mellotronaut** » Wed Nov 25, 2009 11:57 pm

zvenx wrote:found another minor bug:
if in any bank you choose the first preset and mark it as junk and say hide junk... it still shows.... if you mark any other preset in that bank as junk it works fine.
also, if you mark the first one as junk, you can't with the use of mouse click and load the last preset of that bank, you have to use the scroll arrows on the gui.
thanks
rsp

this is, because the first preset is always the best

zvenx · Post by **zvenx** » Thu Nov 26, 2009 12:03 am

lol
rsp

rob_lee · Post by **rob_lee** » Thu Nov 26, 2009 12:08 am

mellotronaut wrote:
zvenx wrote:found another minor bug:
if in any bank you choose the first preset and mark it as junk and say hide junk... it still shows.... if you mark any other preset in that bank as junk it works fine.
also, if you mark the first one as junk, you can't with the use of mouse click and load the last preset of that bank, you have to use the scroll arrows on the gui.
thanks
rsp
this is, because the first preset is always the best

the default preset?

Rob

mellotronaut · Post by **mellotronaut** » Thu Nov 26, 2009 12:13 am

rob_lee wrote:
mellotronaut wrote:
zvenx wrote:found another minor bug:
if in any bank you choose the first preset and mark it as junk and say hide junk... it still shows.... if you mark any other preset in that bank as junk it works fine.
also, if you mark the first one as junk, you can't with the use of mouse click and load the last preset of that bank, you have to use the scroll arrows on the gui.
thanks
rsp
this is, because the first preset is always the best
the default preset?

Rob

whaddawa say? difficult preset? I'm deaf after ace

zvenx · Post by **zvenx** » Thu Nov 26, 2009 12:13 am

each bank has a default preset?
rsp

u-he

KVR Audio

U-he ACE!