Toggle Process ON/OFF keyboard shortcut - Bug?

[TheGuysanIdiot]

Specific or generic does not seem to work when assigning a key to the above command.

Anyone else confirm this?

3.1.32

Windows

OZ

[MuTools]

Checked it here, works fine.

Where are you using it, and on what kind of module?

[TheGuysanIdiot]

Hi Jo,

It works in the Modular Area OK.

But not in a rack slot.

Any module, such as OnBeat.

OZ

[MuTools]

Individual rack slots can't take keyboard focus yet, i.e. the green rectangle around a GUI object. It's on the wishlist.

[TheGuysanIdiot]

No problem.

I will just move the module into the MA and toggle from there.

Anyway I am trying to find a way to toggle an insert effect on/off and record the action a bit like a midi control lane.

There may be a way to do this.

If I have a synth playing on one track for say 4 bars and there is an insert fazor effect ON so the track will play for 4 bars I then want the effect toggled OFF for the next 4 bars and then the effect back ON for the next 4 bar etc.

This is a bit like playing a guitar with stomp boxes that go on then off as the song plays

Is it possible to automate the "process on/off" hence record the on/off within the session?

Hope this makes sense.

OZ

[MuTools]

No problem.

I will just move the module into the MA and toggle from there.

You can also leave it in a rack and use [Alt]+click to toggle it.

Or right-click to popup the context menu.

Or use the Process On/Off button in its editor.

Anyway I am trying to find a way to toggle an insert effect on/off and record the action a bit like a midi control lane.
There may be a way to do this.

A module's Process On/Off switch is not recordable.
It's a bit like pulling the module in/out of the outlet.

If I have a synth playing on one track for say 4 bars and there is an insert fazor effect ON so the track will play for 4 bars I then want the effect toggled OFF for the next 4 bars and then the effect back ON for the next 4 bar etc.

This is a bit like playing a guitar with stomp boxes that go on then off as the song plays

I would use a MUX for that and insert the phazor in the MUX and set it up together with a Balancer 1->2 where the first out goes directly to the MUX output and the second out goes to the phazor. Then you can automate the Balancer 'Balance' parameter with the values 0% and 100% to use it as an audio switch

MUX audio In => Balancer 1->2
Balancer 1->2 out 1 => MUX audio Out
Balancer 1->2 out 2 => Phasor
Phasor => MUX audio out

Hope i explain well.

[TheGuysanIdiot]

Balancer 1->2 in a MUX works like a dream. This is much better than just ON/OFF I can blend the insert effect as well as cut off the effect. The automation of the Balancer 1->2 control can then be edited in a controller lane etc.

Super!

Thank you.

OZ