KVR Audio

bhaymes · Post by **bhaymes** » Wed Aug 29, 2012 9:48 am

Clydewinder wrote:then you need to go to the "2" tab ( or an open "channel" on VFX ) and click the little L and R in the input column to enable audio in, then adjust FX send level to send that input signal to your delay plugin on FX1

Hi Clydewinder...With your help, got it sorted out.
I was trying the input highlighted on channel 1 with the organ plug in slot A ... no luck...
tried input highlighted on channel 2 with no plug in any slot...no luck....
Finally input of channel 2 highlighted with an FX plug in slot A ....it works!!...
So input must be used on a channel with a FX plug in slot A...not an instrument plug......Be nice if the manual said this!!.....
Thanks for your help

NON_73 · Post by **NON_73** » Wed Aug 29, 2012 6:43 pm

Well, I've got Audio Realism Drum Machine (ADM) and trying to get it work with the V-machine, which I have failed with.

I get the V-machien to load ADM but I have no sound from ADM!?
How do I get the ADM work?
I have other plugs which work, but when it comes to drum machine emulators II simply can not get them to work!?

NON_73 · Post by **NON_73** » Thu Aug 30, 2012 8:01 am

NON_73 wrote:Well, I've got Audio Realism Drum Machine (ADM) and trying to get it work with the V-machine, which I have failed with.

I get the V-machien to load ADM but I have no sound from ADM!?
How do I get the ADM work?
I have other plugs which work, but when it comes to drum machine emulators II simply can not get them to work!?

I have found the solution myself.
What is to be done is to create separate presets for separate audio because ADM sound patches are not automatically loaded

NON_73 · Post by **NON_73** » Wed Sep 12, 2012 5:48 am

NON_73 wrote:
NON_73 wrote:Well, I've got Audio Realism Drum Machine (ADM) and trying to get it work with the V-machine, which I have failed with.

I get the V-machien to load ADM but I have no sound from ADM!?
How do I get the ADM work?
I have other plugs which work, but when it comes to drum machine emulators II simply can not get them to work!?
I have found the solution myself.
What is to be done is to create separate presets for separate audio because ADM sound patches are not automatically loaded

Well, I have tried and tried but I can't get the ADM to function in V-machine

I get ADM to work in VFX software but not in the V-machine. I also get other drum machine plugs work in VFX, but not in the V-machine.

Does anyone have any suggestions on any drum machine that works in the V-Machine?
I'm curious about the D-909 from Superwave, their P80 works very well so I think it should work
Is there anyone who has tried any more of Superwave plugs and know if they work in the V-Machine

NON_73 · Post by **NON_73** » Thu Sep 13, 2012 6:31 am

Is there anyone who uses MiageLine's Drumaxx

Drumaxx is listed on the plugs that will work on V-Machine, but it's also ADM that I did not get to work

bmot · Post by **bmot** » Sat Sep 15, 2012 3:59 pm

tapper mike wrote:KLC's are virtual not physical It stands for Korg Legacy Edition
http://www.korguser.net/shop/software/

slightly late reply, but you misunderstood. KLC used to come with a hardware controller, surely you've seen it - a cute 3/4 replica of MS20 which is a USB controller. This is it here:

I have one sitting on my shelf looking pretty, but doing nothing. I don't use software these days, only hardware so it would be nice if I could integrate the KLC controller into the hardware setup somehow. Perhaps it's wishful thinking, but the blurb on the v-machine website does say almost any controller can be attached via USB. Surely someone has tried it? Ifany of you have a KLC controller and a v-machine i'd be ever so grateful if you could try it out for me and report back

thanks

gunnare · Post by **gunnare** » Sat Sep 15, 2012 9:43 pm

From what I have heard only controllers that use the standard Microsoft midi-driver works with V-machine USB port. So if your controller is plug and play it will work. If it needs special midi-drivers to work I think it will not work.

All the best
gunnare

Tony Ostinato · Post by **Tony Ostinato** » Sat Sep 15, 2012 9:51 pm

i think its called class compliant? or something close...meaning no special drivers, which you wouldnt be able to install on v-machine anyways.

i got a nanokontrol to work very nicely with it, but im using 2 v-machines to do 4 channels of auto-tune live(actually gsnap which seems to work better on live stuff anyways) and it finally turned out i dont have spare time onstage to adjust anything anyways while playing and mixing so i just set them to presets and let them be and i leave the nanokontrol at home.

bmot · Post by **bmot** » Sun Sep 16, 2012 11:16 am

Tony Ostinato wrote:i think its called class compliant

thanks Tony, it seems you're right. I had another look on the website and saw the "class compliant" phrase in the description. Originally I thought perhaps the driver could be installed somehow, after all the V-Machine is a computer, just in a different form. So it seems I would need to buy another controller as well as the V-Machine, which ends up being too expensive to justify. I'll stick with the laptop for now.

Peter999 · Post by **Peter999** » Sun Sep 23, 2012 11:46 am

Regarding controller you might have a look at Behringer BCR2000 which runs perfectly together with the V-Machine. No drivers needed, you just can connect it by USB and it works. The great thing is you also can use it with MIDI feedback then so that parameters keep track after changing presets which is fantastic. MIDI feedback can be activated in the MIDI settings of the V-Machine menu.

Here's an example using the VM Bundle in MIDI feedback mode:

The BCR2000 just costs around $150, e.g. at amazon:
http://www.amazon.com/Behringer-BCR2000 ... B000CZ0RJC

If it would be stolen I'd get another one immediatly. It really offers an unbelievable number of controls and possibilities for that small price.

mclane · Post by **mclane** » Sat Nov 17, 2012 6:35 pm

"The END is here":
http://www.vmachineforum.com/

No official support anymore? Is the V-Machine finally dead now?

Ashe37 · Post by **Ashe37** » Sat Nov 17, 2012 6:55 pm

mclane wrote:"The END is here":
http://www.vmachineforum.com/

No official support anymore? Is the V-Machine finally dead now?

That forum isn't run by SM Pro Audio.

mclane · Post by **mclane** » Sun Nov 18, 2012 8:42 pm

So why does it read "Official SM Pro Audio V-Machine Forum"? Is there another one?

Ashe37 · Post by **Ashe37** » Sun Nov 18, 2012 9:21 pm

read the posts...

Tony Ostinato · Post by **Tony Ostinato** » Mon Nov 19, 2012 1:25 am

posts seem to be deleted.

so id say v-machine is dead.