CWITEC

elcallio · Post by **elcallio** » Mon Oct 29, 2012 12:31 am

Jonathan Shepherd wrote:I couldn't find your email address-

Check pm. Cheers

cerendir · Post by **cerendir** » Mon Oct 29, 2012 9:17 am

elcallio wrote: [*]Fixed crash in GDI+ shutdown on XP

Yup, works great now, thanks!

A few niggles though:

- Am I the only one to experience that it's impossible to type spaces in program slot names (in REAPER)? The key is passed through to the program, starting playback.

- Smooth scrolling in the file browser would be nice. It jumps around a bit too much for my taste right now, which is confusing if you're in a dir with a lot of stuff in it.

- I would like to see an option for creating a new program slot directly below the currently selected one, because dragging slots around is a PITA.

- A small memory usage display would be great. It's easy to forget that you have unused samples loaded and this would help prevent runaway RAM usage. Maybe something like:

490MB / 122MB

Where the second number indicates unused samples.

Keep up the good work!

elcallio · Post by **elcallio** » Mon Oct 29, 2012 9:25 am

cerendir wrote:
elcallio wrote: [*]Fixed crash in GDI+ shutdown on XP
Yup, works great now, thanks!

A few niggles though:

- Am I the only one to experience that it's impossible to type spaces in program slot names (in REAPER)? The key is passed through to the program, starting playback.

Reaper simply does not propagate space to plugins. Neither window messages or VST callbacks. Not much I can do here...

cerendir wrote: - I would like to see an option for creating a new program slot directly below the currently selected one, because dragging slots around is a PITA.

You can use "duplicate slot" to coy the select slot(s). The result will end up after the selected one.

cerendir wrote: - A small memory usage display would be great. It's easy to forget that you have unused samples loaded and this would help prevent runaway RAM usage. Maybe something like:

490MB / 122MB

Its in the todo list, both samples and undo queue.
Cheers

EvilDragon · Post by **EvilDragon** » Mon Oct 29, 2012 9:27 am

Did you try right-clicking on the window header and selecting "send all keyboard input to plugin"? Works here.

elcallio · Post by **elcallio** » Mon Oct 29, 2012 10:00 am

Jonathan Shepherd wrote:It only happens with certain samples. I'll send you some wav examples, along with the repeaks files generated. Not to sound like a big dummy, but where do I send these files? I can send them as attachments in gmail, or is there a better way?
I have an avi of the process but will wait on posting unless you ask for it. Thanks-

Ok, reproduced, verified and fixed. D2D1 did not enjoy trying to blit a rather large offscreen bitmap and thus the drawn waveform became blank. I've fixed the caching code, now all is fine.
Thanks for the repro files.

ACR23 · Post by **ACR23** » Mon Oct 29, 2012 11:46 am

Hi elcallio,

TX16Wx b16 (x64) has an gui error with cubase x64:

https://www.dropbox.com/s/apo3l6t068vn7 ... 0Error.jpg

I tried to resize the gui but the performance selector doesn't react. The whole gui reacts only to right-click. It's also not possible to switch the view tabs.

elcallio · Post by **elcallio** » Mon Oct 29, 2012 12:04 pm

ACR23 wrote:Hi elcallio,

TX16Wx b16 (x64) has an gui error with cubase x64:

https://www.dropbox.com/s/apo3l6t068vn7 ... 0Error.jpg

I tried to resize the gui but the performance selector doesn't react. The whole gui reacts only to right-click. It's also not possible to switch the view tabs.

Weird. Which version of cubase? And does this happen when you load the plugin, or after an UI resize? At least up until v5 cubase does not respond to the host callback for window resize, thus one has to close and reopen the gui for that to work. But you say the UI becomes unresponsive, which should never happen.
You can try opening your setting.ini in <profile>\AppData\Local\TX16Wx and change the flag UiSize to 0, that will reset UI size to smallest.

ACR23 · Post by **ACR23** » Mon Oct 29, 2012 12:20 pm

elcallio wrote:
ACR23 wrote:Hi elcallio,

TX16Wx b16 (x64) has an gui error with cubase x64:

https://www.dropbox.com/s/apo3l6t068vn7 ... 0Error.jpg

I tried to resize the gui but the performance selector doesn't react. The whole gui reacts only to right-click. It's also not possible to switch the view tabs.
Weird. Which version of cubase? And does this happen when you load the plugin, or after an UI resize? At least up until v5 cubase does not respond to the host callback for window resize, thus one has to close and reopen the gui for that to work. But you say the UI becomes unresponsive, which should never happen.
You can try opening your setting.ini in <profile>\AppData\Local\TX16Wx and change the flag UiSize to 0, that will reset UI size to smallest.

The cubase version is 5.5.3. It happens when I load the plugin, I've allready closed and reopend the gui, which didn't work.

After changing the flac UiSize to 0 only the frame of the plugin decreased:

https://www.dropbox.com/s/igrtvzvgg2djb ... ze%3D0.jpg

EvilDragon · Post by **EvilDragon** » Mon Oct 29, 2012 1:58 pm

This installer still doesn't use the VST folder location from registry, it seems?

I have it set up to C:\VST\, but the installer always sets C:\Program Files\Steinberg\Vstplugins.

elcallio · Post by **elcallio** » Mon Oct 29, 2012 2:15 pm

EvilDragon wrote:This installer still doesn't use the VST folder location from registry, it seems?

I have it set up to C:\VST\, but the installer always sets C:\Program Files\Steinberg\Vstplugins.

The installer checks the Software\VST\VSTPluginsPath entry, but note that for the 64 bit plugin, it will check this in the 64-bit section of the registry, thus if you've set the 32-bit entry, this will be ignored.
(And yes, I've verified this works as expected

Cheers

EvilDragon · Post by **EvilDragon** » Mon Oct 29, 2012 3:07 pm

Alright, I have HKLM\Software\Wow6432Node\VST\VSTPluginsPath entry set to C:\VST, but it doesn't seem to work

That being said, I can't seem to find 32-bit version of that entry in my registry.

elcallio · Post by **elcallio** » Mon Oct 29, 2012 3:43 pm

EvilDragon wrote:Alright, I have HKLM\Software\Wow6432Node\VST\VSTPluginsPath entry set to C:\VST, but it doesn't seem to work

That being said, I can't seem to find 32-bit version of that entry in my registry.

Wow6432Node is the 32-bit one.

EvilDragon · Post by **EvilDragon** » Mon Oct 29, 2012 3:44 pm

Oh, whoops.

I always thought that was the 64-bit one, for whatever reason. Well, you learn something every day.

guppi · Post by **guppi** » Mon Oct 29, 2012 5:10 pm

ACR23 wrote:Hi elcallio,

TX16Wx b16 (x64) has an gui error with cubase x64:

https://www.dropbox.com/s/apo3l6t068vn7 ... 0Error.jpg

I tried to resize the gui but the performance selector doesn't react. The whole gui reacts only to right-click. It's also not possible to switch the view tabs.

Hi,

it's the same here with Live 8.3.4 32bit, Reaper 4.22 32bit on Win 7 64.
But I could push the key c-1 if I click a little above the virtual keyboard. Then I hit c0. And this difference increases. When I hit c4 the virtual keyboard plays c6...bug scaling

On my win 7 32 bit laptop it's working fine. Great Sampler btw!!

I would consider an own "add on" format for developers who want to sell their libraries. It's not the same but lacking of an protected format was the death of Gigasampler. Other way around it could be an advantage to give developers the possibilty to sell their libraries? Dunno..

And you could establish a contest like : "best sound with only 1 mb" or something like this

All the best!

DarkStar · Post by **DarkStar** » Mon Oct 29, 2012 5:15 pm

elcallio wrote:
EvilDragon wrote:Alright, I have HKLM\Software\Wow6432Node\VST\VSTPluginsPath entry set to C:\VST, but it doesn't seem to work

That being said, I can't seem to find 32-bit version of that entry in my registry.
Wow6432Node is the 32-bit one.

Curious - where's the 64-bit one? I haven't installed anything yet that has created it.

CWITEC

KVR Audio

TX16Wx 2.0 Beta 16a Available (2012-10-30)