u-he

sascha · Post by **sascha** » Mon Sep 09, 2013 7:33 am

Howard wrote:
Compyfox wrote:Would still love to see the delay presets as part of the regular release (which should be tomorrow, still - if all bugs are handled).
Hi Compyfox . I downloaded your RE-201 and Copycat delays today (latest versions) - with your permission, they will be included in the presets.

Ok, but as we put all contributers' initials in front of every file... Compyfox, are you fine with 'RL_', or what shall I choose?

Howard · Post by **Howard** » Mon Sep 09, 2013 8:04 am

sascha wrote:Compyfox, are you fine with 'RL_', or what shall I choose?

Some people (including me) don't like underscores in preset names. Existing u-he factory presets are "XX name of preset" (XXX also allowed). Up to you, though

sascha · Post by **sascha** » Mon Sep 09, 2013 8:05 am

Howard wrote:
sascha wrote:Compyfox, are you fine with 'RL_', or what shall I choose?
Many people (including me) don't really like underscores in preset names. Existing u-he factory presets are "XX name of preset" (XXX also allowed).

Le chef himself ordered them... but I can ask again

Urs · Post by **Urs** » Mon Sep 09, 2013 8:29 am

No underscores please - they look a lot like flatmatic

4damind · Post by **4damind** » Mon Sep 09, 2013 8:35 am

Underscores are a bad idea. It comes more from Unix programmers using this for file names because spaces in file names are often a bit problematic on Unix systems.

Compyfox · Post by **Compyfox** » Mon Sep 09, 2013 8:53 am

Howard wrote:
Compyfox wrote:Would still love to see the delay presets as part of the regular release (which should be tomorrow, still - if all bugs are handled).
Hi Compyfox . I downloaded your RE-201 and Copycat delays today (latest versions) - with your permission, they will be included in the presets.

Sure, go ahead. You can even put them into the delay subfolder.
Looking forward to that as people seem to have liked the presets.

Most current time stamp for all of the presets should be 09-09-2013 at 1:25am.

sascha wrote:Ok, but as we put all contributers' initials in front of every file... Compyfox, are you fine with 'RL_', or what shall I choose?

You can either use RL_ (which are my initials after all). Studio Compyfox Network abbreviated is a bit... stupid (SCN? not feeling that yet). The link to my page is still in the descriptions.

Urs wrote:No underscores please - they look a lot like flatmatic

Funny that you folks mention that, because 90% of the presets use
<initial>_<preset name>

Actually, I'm surprised that your plugin eats the tagging 7.5, rather than 7,5. Windows sometimes barfs with the file definition if there are a lots of .'s in a filename.

Either way - I'm out.
Q's might not be answered until later that day - or even tomorrow. Sorry.

EvilDragon · Post by **EvilDragon** » Mon Sep 09, 2013 9:03 am

Yes I hate underscores.

sqigls · Post by **sqigls** » Mon Sep 09, 2013 9:08 am

Compyfox wrote: - Roland Space Echo RE-201 (2 machines with different head positions!)
- WEM/Watkins Copycat Mk IV

PRESETS:
RL Space Echo Presets v1.01
RL Copycat Presets v1.01

Suitable for SATIN v1827 (RC) and up.
Please enjoy.

Where is this v1827 please?
I only see 1818...

Thank you for the presets!
cheers

EDIT: I see, sorry...is this a pre release beta that is older than 1818?

Krakatau · Post by **Krakatau** » Mon Sep 09, 2013 9:32 am

Urs wrote:No underscores please - they look a lot like flatmatic

Mes humbles hommages, monsieur le chef !

BTW i,m reluctant to use my credit card on an iPad for an AU versions i Won,t download yet, but...

Urs · Post by **Urs** » Mon Sep 09, 2013 9:34 am

sqigls wrote:
Compyfox wrote: - Roland Space Echo RE-201 (2 machines with different head positions!)
- WEM/Watkins Copycat Mk IV

PRESETS:
RL Space Echo Presets v1.01
RL Copycat Presets v1.01

Suitable for SATIN v1827 (RC) and up.
Please enjoy.
Where is this v1827 please?
I only see 1818...

Thank you for the presets!
cheers

EDIT: I see, sorry...is this a pre release beta that is older than 1818?

It's on the bottom of the first post... I made it on Saturday but couldn't be bothered doing proper installers and all. Hence it's a bit more "inofficial"

Nevertheless... the final compiles will be running soon, and the it's only a matter of hours until we have a 1.0

4damind · Post by **4damind** » Mon Sep 09, 2013 9:46 am

Urs wrote:Nevertheless... the final compiles will be running soon, and the it's only a matter of hours until we have a 1.0

Apollon, der Gott der Musik, wird dich dafür heilig sprechen

Ch00rD · Post by **Ch00rD** » Mon Sep 09, 2013 9:48 am

I also experienced similar issues with saving presets as have been reported earlier, using Live 9.0.5 (32 bit) on OS X 10.8.4, multiple instances of Satin (some grouped, some not grouped).

Compyfox wrote:Man!
I don't know WHAT happened, but this pissed me off big time!

I wasted 1,5 hours on fine tuning a preset (another tape delay), saved it, clicked "save and backup", reloaded it and...

It turned into a studio preset and all other settings were gone, half of the service panel settings were also reset - and the service panel was closed on top of it (not opened GUI wise). [...]

On a positive note, I can confirm this now works as documented and expected (tested in Rev1827):

Urs wrote:
Ch00rD wrote:
Urs wrote:@Ch00rd - if you grab the slider at its handle, you can freely move it. Only if you click into free space inside the slider region it'll quantise to 16th notes. You can furtermore use shift for fine control and you can use shift + mousewheel for that as well.
Yes, the *slider* can be moved outside of the quantised positions, but the actual delay time does not change when doing so (iirc, I'm not at computer atm, but I'll triple check later).
Hmmm... that should be fixed in post 1818 revisions. Afaik

geronimo · Post by **geronimo** » Mon Sep 09, 2013 10:06 am

One Patches only, to classified in the "Studio Mode" category if you're interested .

http://www.sendspace.com/file/lcnciv

Urs · Post by **Urs** » Mon Sep 09, 2013 10:40 am

Ok guys. I have found two critical bugs, based on your feedback.

1 Preset don't always load properly when saved with locked parameters. The presets are okay, but the loading doesn't work proeprly.

2. The Group Controller can be confused if projects are loaded while there's still another project open, or possibly even when loading presets in a Grouped instance. This can lead to a crash.

I'll try to fix those two bugs within an hour, or we need to postpone release by a few days.

Ch00rD · Post by **Ch00rD** » Mon Sep 09, 2013 10:53 am

Urs wrote:Ok guys. I have found two critical bugs, based on your feedback.

1 Preset don't always load properly when saved with locked parameters. The presets are okay, but the loading doesn't work proeprly.

2. The Group Controller can be confused if projects are loaded while there's still another project open, or possibly even when loading presets in a Grouped instance. This can lead to a crash.

I guess issue 2. is especially problematic if you e.g. use a project template using grouped instances. I think this is what happened to me earlier, using a template with Ableton Live. Can reproduce with more crash reports, if needed.

Urs wrote:[...] I'll try to fix those two bugs within an hour, or we need to postpone release by a few days.

u-he

KVR Audio

Satin goes V1.1