u-he

Urs · Post by **Urs** » Fri Oct 25, 2013 6:10 am

sl1914 wrote:I hope there will be some official presets that demonstrate these new added features. Because MANY users will be asking the same question as the OP.

There'll be plenty

paterpeter · Post by **paterpeter** » Fri Oct 25, 2013 7:44 am

SaganTech wrote: [...]
HIERISTES!!!
[...]

That made me chuckle

(HIERISTES = hier ist es = here it is)

This little entry tells a whole story of a desperate debugging session.

brento · Post by **brento** » Fri Oct 25, 2013 7:46 am

I am so glad I made the decision to purchase both the Zebra 2 + Diva over the Access Virus TI.

What underpriced synths. Thank you so much U-He.

Urs · Post by **Urs** » Fri Oct 25, 2013 9:01 am

paterpeter wrote:
SaganTech wrote: [...]
HIERISTES!!!
[...]
That made me chuckle (HIERISTES = hier ist es = here it is)

This little entry tells a whole story of a desperate debugging session.

I'm glad we removed most swear words from the logs

virtualmark · Post by **virtualmark** » Fri Oct 25, 2013 9:16 am

Kaboom75, thanks for the explanation I'll give it a try. I just wanted to get the original supersaw as I've never used a JP-8000!

Kaboom75 · Post by **Kaboom75** » Fri Oct 25, 2013 9:36 am

http://soundcloud.com/lee-michael-ashwo ... -megasaw-1
Supersaw Phaser Pad
I made this preset using u-he DIVA 1.3's new modules

Digital Osc ( Roland JP-80X0 Oscillator )
UHBIE filter ( Oberheim state variable filter )
Minimoog feedback
MEGA-SAW (Supersaw) Is seven stacked sawtooth waves.

Chorus and Phazer used is DIVA's own built in effects
Delay is Soundtoys Echoboy
Plate Reverb effect Valhalla Vintage Verb

Guenon · Post by **Guenon** » Fri Oct 25, 2013 11:29 am

Bronto Scorpio wrote:I guess there is something wrong with some dropdown menus, as the same thing happens with the LFO rates (a rate of 1s switches to 0.1s after a reload and so on).

Good catch. Another bug I noticed, possibly related:

When you have any Diva parameter automated (at least in Studio One and Live), simply opening the plugin GUI sends the host a "parameter has been changed manually" message. For example, in Studio One, when an automation lane is in Read mode, opening the GUI stops the corresponding control following the automation envelope, as the host erroneously interprets the situation as if the user had just adjusted the control manually.

In a situation like this, the user needs to "reset" the parameter change state, for example by (after opening the GUI) stopping the project and then resuming playback.

I double checked this in Ableton Live, and sure enough, having a parameter automated and then opening the GUI causes Live to switch to "parameter has been changed manually" state, highlighting the "Return to arrangement" button in the main control bar. This means that the plugin has now stopped following the present automation, because an automated parameter has been manually adjusted. More specifically, in this case it erroneously thinks this has happened, because the GUI has been opened.

Edit: actually, the current Zebra, ACE and Uhbiks seem to do the same

, oh dang.

Bronto Scorpio · Post by **Bronto Scorpio** » Fri Oct 25, 2013 11:57 am

If anyone who wants to try a classic, trancy supersaw sound: https://dl.dropboxusercontent.com/u/783 ... Trance.zip

Defintely use MW, PB, AT and Breath control with that preset.
The preset uses the new osc and filter and the arp.

Cheers
Dennis

Ingonator · Post by **Ingonator** » Fri Oct 25, 2013 12:14 pm

I have done my own Init patch for the Supersaw (includes the new digital oscillator, the new Uhbie filter, the Jupiter HPF and the digital envelopes):

https://dl.dropboxusercontent.com/u/532 ... aw%201.h2p

Ingo

Urs · Post by **Urs** » Fri Oct 25, 2013 12:37 pm

Fixed the tune/lfo timing bug. Was an oversight on our side where a rounding error was fixed, but a workaround for said rounding error was still in the code - thus creating a new rounding error

Howard · Post by **Howard** » Fri Oct 25, 2013 12:54 pm

Ingonator wrote:I have done my own Init patch for the Supersaw (includes the new digital oscillator, the new Uhbie filter, the Jupiter HPF and the digital envelopes):
https://dl.dropboxusercontent.com/u/532 ... aw%201.h2p
Ingo

Good idea

Ingonator · Post by **Ingonator** » Fri Oct 25, 2013 1:18 pm

Howard wrote:
Ingonator wrote:I have done my own Init patch for the Supersaw (includes the new digital oscillator, the new Uhbie filter, the Jupiter HPF and the digital envelopes):
https://dl.dropboxusercontent.com/u/532 ... aw%201.h2p
Ingo
Good idea

Thanks, Howard.

That one is mostly for the Supersaw as the two shape knobs are not at default (Multi at maximum and Detune at 50%). For other oscilator modes setting them to the default value could be necessary.
Maybe i'll do an Init patch for each of the new osc shapes...

Ingo

re*MD9@3!Tm^ · Post by **re*MD9@3!Tm^** » Fri Oct 25, 2013 1:37 pm

Guenon wrote:
Bronto Scorpio wrote:
Edit: actually, the current Zebra, ACE and Uhbiks seem to do the same , oh dang.

Thanks for the hint, I observed this as well, but didn't know it had sth to do with Zebra.

fluxmind · Post by **fluxmind** » Fri Oct 25, 2013 2:21 pm

Urs wrote:Fixed the tune/lfo timing bug.

Bring it on

Urs · Post by **Urs** » Fri Oct 25, 2013 2:42 pm

fluxmind wrote:
Urs wrote:Fixed the tune/lfo timing bug.
Bring it on

Shortly... might happen tonight

u-he

KVR Audio

Diva 1.3.0b3 (r1973)