u-he

ETMuz · Post by **ETMuz** » Sun Nov 17, 2013 6:40 am

Urs wrote:
ETMuz wrote:Ok a little help please - I downloaded and installed and nothings different...what do i do? My zebra is the same and says 2.5
It should say 2.6.1 - unless you use RTAS, which is 2.5.2

If you right-click a preset folder you can open it in Finder/Explorer and thus see if you have 2 installations maybe.

I'll try that Urs. I do have RTAS but i thought this was AAX? I have other plugins that say AAX like EW Play and NI Kontakt

I use PT10 HD Native on Mountain Lion

trance_lucent · Post by **trance_lucent** » Sun Nov 17, 2013 12:37 pm

Urs wrote:
trance_lucent wrote:Something strange. Trying to test my Logic projects with new Zebra - and it plays unevenly the 1/16 patterns - like there is some Swing is on (it is off). Maybe something with my Logic? Yesterday it was ok.
Will investigate. There was a similar report re Diva, maybe we still have some note timing randomisation on for debugging something

But Bronto Scorpio's example shows perfect timing. Or it depends on platform?
Here is my example (totally messed timing):
https://dl.dropboxusercontent.com/u/570 ... broken.mp3

Tp3 · Post by **Tp3** » Sun Nov 17, 2013 2:35 pm

pdxindy wrote:
Tp3 wrote:Zebra + Distortion = Zee-tortion
or maybe Zebrbrbrbrbra

Well, you don't need all these brabrabrabra

Only one zee-bra on one zee-bar

Back to topic :

I have tried (vst2\vst3) to hear the offbeat phenomenon... I am not sure I could detect any. but I ended up reverting to 2.6 just to be on the safe side...

trance_lucent · Post by **trance_lucent** » Sun Nov 17, 2013 4:28 pm

trance_lucent wrote: But Bronto Scorpio's example shows perfect timing. Or it depends on platform?
Here is my example (totally messed timing):
https://dl.dropboxusercontent.com/u/570 ... broken.mp3

In spite of this, new distortion module very creative!
Both sounds created with Rectify:
https://dl.dropboxusercontent.com/u/570 ... ectify.mp3
Welcome to the dirt side of Zebra!

C64Paul · Post by **C64Paul** » Sun Nov 17, 2013 7:31 pm

The distortion module is superb! I've had great fun with the beta, seeing what weird and wonderful sounds I could make using simple waveforms and a whole lot of mod matrix'd distortion. The rectify mode can be particularly interesting.

Thank you Urs! Will ZebraHZ also get this module?

V0RT3X · Post by **V0RT3X** » Sun Nov 17, 2013 7:35 pm

trance_lucent wrote:
trance_lucent wrote: But Bronto Scorpio's example shows perfect timing. Or it depends on platform?
Here is my example (totally messed timing):
https://dl.dropboxusercontent.com/u/570 ... broken.mp3
In spite of this, new distortion module very creative!
Both sounds created with Rectify:
https://dl.dropboxusercontent.com/u/570 ... ectify.mp3
Welcome to the dirt side of Zebra!

Nice sound! I might have to re-buy Zebra again it was a workhorse fave of mine

Urs · Post by **Urs** » Sun Nov 17, 2013 8:52 pm

C64Paul wrote:The distortion module is superb! I've had great fun with the beta, seeing what weird and wonderful sounds I could make using simple waveforms and a whole lot of mod matrix'd distortion. The rectify mode can be particularly interesting.

Thank you Urs! Will ZebraHZ also get this module?

Sure, once it's set in stone

mabian · Post by **mabian** » Sun Nov 17, 2013 9:26 pm

So, any chance that the problem I reminded will be fixed with this release?

Thank you,
Mario

3*s · Post by **3*s** » Mon Nov 18, 2013 4:54 am

For some reason to get distorted filter sweeps to sound like I want I need to set the XMF filter to parallel LP1 or LP2 with about 50% offset. But it does work.

artpunk · Post by **artpunk** » Mon Nov 18, 2013 6:09 am

Hi people, I just bought and downloaded Zebra 2 today and after a preliminary play around with it, I am super impressed. I guess I should RTM at some stage, but I've been having way too much fun tweaking sounds. What a great sonic engine! The next thing I did when I took a breath was join this forum, so being my first post, apologies if this is a dumb question, should I install this beta or get used to the version I downloaded first? Thanks to Urs and the u-he team for such a great product.

Totolitoto · Post by **Totolitoto** » Mon Nov 18, 2013 6:29 am

artpunk wrote:Hi people, I just bought and downloaded Zebra 2 today and after a preliminary play around with it, I am super impressed. I guess I should RTM at some stage, but I've been having way too much fun tweaking sounds. What a great sonic engine! The next thing I did when I took a breath was join this forum, so being my first post, apologies if this is a dumb question, should I install this beta or get used to the version I downloaded first? Thanks to Urs and the u-he team for such a great product.

The beta is working fine, but maybe you should waity until official release

And welcome by the way. But being an U-He fan is a very good start around here

bftucker · Post by **bftucker** » Mon Nov 18, 2013 7:30 am

artpunk wrote: I am super impressed.

Welcome to the U-HErd. "Super Impressed?"

We got what you need:

http://www.kvraudio.com/forum/viewtopic ... 67#5521567

(and Diva and Satin and Ace and...)

Urs · Post by **Urs** » Mon Nov 18, 2013 10:08 am

mabian wrote:So, any chance that the problem I reminded will be fixed with this release?

Thank you,
Mario

Hmm, what skin are you using? - I was quite sure it's fixed in the original one, which is the only one I've touched so far.

mabian · Post by **mabian** » Mon Nov 18, 2013 10:59 am

Urs wrote:
mabian wrote:So, any chance that the problem I reminded will be fixed with this release?

Thank you,
Mario
Hmm, what skin are you using? - I was quite sure it's fixed in the original one, which is the only one I've touched so far.

Tested on original one, just after installing new beta (version says 2.6.1 b1 or something similar IIRC).

- Mario

EvilDragon · Post by **EvilDragon** » Mon Nov 18, 2013 11:19 am

Yep, I can confirm as well.

Not only that, but the Gain knob looks different - like it's coming from the Unempty skin, or something.

u-he

KVR Audio

Zebra + Distortion (new rev 2079)