Diva, extremely noob question.

[Ikok Kameshi]

this is an example

Yeah, this sounds like phase stuff. What oscillator module is being used? If it's the Triple VCO there are two 'sync' rocker switches (or if the dual VCO there's a 'sync' button). Engaging these will cause all 3 (or 2) oscillators to lock phase*, and the artifact you hear should disappear. If this isn't happening, could you post the patch?

DIVA's 'analog' is not as simple as 'random', but may appear random at times

* - It's trickier than that, the manual should have an explanation of what's happening.

I was using a dual vco, but the sync button fixed the problem thank you very much <3


https://soundcloud.com/ikok-kameshi/test-sound-2

[Howard]

* - It's trickier than that, the manual should have an explanation of what's happening.

You don't want to know (waves hand once in front of your eyes)

[NadirToZenith]

hello, kvr-ers,

i was thinking about the sync solution too, wanted to suggest it at second stage (if, when, the zeroing out of the trimming parameters could, would, not make it), many thanks for everybody who wrote about it.

all these problems seem to be solved, then?

ikok, do you still need my version of the patch or do you feel satisfied with the solution done by yourself?

diva's predictableness required?
why not?
there are cases, where it is more than needed, sub basses using some of the beautiful sounding filter, output, saturation, those admirable glide nuances between notes, so, again, why not?

> waves hand once in front of your eyes
mmmmm... ^^^^^ this...

all the best...

[Howard]

diva's predictableness required?
why not?

Actually, all the predictableness (is that a word?) you need is already in there - study the manual, pages 32 and 33.

[NadirToZenith]

you want diva to be clean and predictable?

^^^^^^^^^^^^^^^^^^^^^^^^^
the actual cause of my quasi-astonishment (hope that this is a word)...

yes, the manual is really clear about this (too).

all the best...

[Ikok Kameshi]

you want diva to be clean and predictable?

^^^^^^^^^^^^^^^^^^^^^^^^^
the actual cause of my quasi-astonishment (hope that this is a word)...

yes, the manual is really clear about this (too).

all the best...

This is what I got but theres things that i dont know how to translate to diva.
for example the volume noise knob I dont know where it is on diva.



Pro-53

Osc 1 Sawtooth, Square
Osc 2 Sawtooth, Square

Noise Knob 6%

Amplifier Envolope

Attack 0% - 100%
Decay 52% - 100%
Sustain 39% - 100%
Release 78% - 100%

Filter Envolope

Attack 84% - 100%
Decay 71% - 100%
Sustain 43% - 100%
Release 61% - 100%

Filter

Cutoff 39 - 120 st converted to % (32.5%)
Reso 36% - 100%
Env amt 47.91 % - 100%
Kbd 100% - 100%

Pw 68%
Glide 28%

Voices 6

Poly Mod

osc b 32% -100%

Lfo

Freq knob - 0.081 - 32.70
------------------------------------------------------------------
Diva

Osc 1 Sawtooth, Square
Osc 2 Sawtooth, Square

Noise Knob ?

Amplifier Envolope

Attack 0.00 - 100.0
Decay 52.00 - 100.0
Sustain 39.00 - 100.0
Release 78.00 - 100.0

Filter Envolope

Attack 84.00 - 100.0
Decay 71.00 - 100.0
Sustain 43.00 - 100.0
Release 61.00 - 100.0

Filter

Cutoff 150.00 converted to 32.5% = 48.75% -100%
Reso 36.00 - 100.00
Env amt 47.91 - 100.00
Kbd 100.00 - 100.00

Pw 68.00 -100.00
Glide 28.00 -100.00

Voices 6

Poly Mod

osc b ?

Lfo

Freq knob ?




This is the sound im trying to get

https://soundcloud.com/ikok-kameshi/pro-53

This is the sound im getting

https://soundcloud.com/ikok-kameshi/diva

and these are the paramaters in red that I dont know how to apply them on diva


http://snag.gy/IdSOn.jpg

and here is the patch

http://ge.tt/87S0m2r1/v/0?c


long post ....

[NadirToZenith]

hello, Ikok,

where i live presently, it is about 22:15 now.

if the patch can wait till tomorrow, during the office hours i will be able to make this sound (as close as possible) in the studio.

after work i will be able to send it to you or post it here, the choice is yours.

all the best...
ntz

[Ikok Kameshi]

hello, Ikok,

where i live presently, it is about 22:15 now.

if the patch can wait till tomorrow, during the office hours i will be able to make this sound (as close as possible) in the studio.

after work i will be able to send it to you or post it here, the choice is yours.

all the best...
ntz

hello nadir

send me a pm, thank you for taking your time I really appreciate it!

regards!

[Howard]

@ Ikok Kameshi: It sounds like you're driving the filter too hard. Try turning the oscillator levels down (use highpass or Triple if necessary).