Bazille 3437- I don't know if the hanging note bug is related to some patches stopping playing after a certain (random?) amount of loops within a clip in Live 9.2.4/5
Example: A single MIDI note (playing a Bazille sequence) within a 4-bar clip would loop, stopping producing audio after 2 loops, sometimes 1. Did not happen prior to the 3437 update with exactly the same clips/tracks/patches.
This is quite the showstopper. All projects certain patches affected (unsure - I haven't honed in on the culprit within patches as some are not affected at all). Bazille would loop happily within a clip for a short time and then just stop producing audio. Wish I kept the old installer files like I do with Hive to roll back when needed.
edit: just tested and found the same behaviour in non-beta Live 9.1.7
If anyone has a copy of the previous version (3304 I think), I would greatly appreciate an upload/link.
nevermind, I found a link in the other thread.
EDIT # 10000: what the f**k. The problem persists with 3304. I do not understand why this is happening - driving me nuts!!! Some very specific patches just sound different and stop producing audio after a while. So the problem is not with Bazille it seems then, but something else in my setup - but nothing has changed. *bashes face against wall screaming*
...I did not delete version 3437 first before installing the older 3304 - is it possible that the newer version is not properly overwritten and some remnants of it are still affecting my patches?
March 2015 update: ACE, Bazille & Zebra2 (rev 3437)
-
- KVRist
- 253 posts since 13 Nov, 2013 from London
-
- KVRAF
- 4141 posts since 11 Aug, 2006 from Texas
Finally got around to upgrading my installs of Bazille and ACE. On both of them I'm unable to change the cable thickness or transparency (x64 Windows, Reaper 4.xx). Both plugins read 3437.
-
- KVRist
- 265 posts since 30 Sep, 2007 from Roma
Hi URS, News for the skin bug?
God save the Groove!
-
- u-he
- Topic Starter
- 30207 posts since 8 Aug, 2002 from Berlin
We're trying to rush out Latest Builds with a fix. However, firstly we need to fix some other things and release Presswerk 1.1
-
- KVRAF
- 24415 posts since 7 Jan, 2009 from Croatia
Will that fix the crashing happening when closing the GUI with Redux skin in Zebra etc.? 
-
- u-he
- Topic Starter
- 30207 posts since 8 Aug, 2002 from Berlin
I don't know.EvilDragon wrote:Will that fix the crashing happening when closing the GUI with Redux skin in Zebra etc.?
-
- KVRAF
- 24415 posts since 7 Jan, 2009 from Croatia
I'll let you know
-
- KVRAF
- 1959 posts since 21 Sep, 2007 from The Infinite Void
Weird little Zebra2 bug... I think...
In VCF module, if I select EQ Peaking, it displays as BR Notch but functions correctly, if I select it again from the menu it displays EQ Peaking correctly. Doesn't happen every time, but most times.
Ableton 9.1 32-bit, Windows 8.1
In VCF module, if I select EQ Peaking, it displays as BR Notch but functions correctly, if I select it again from the menu it displays EQ Peaking correctly. Doesn't happen every time, but most times.
Ableton 9.1 32-bit, Windows 8.1
-
- KVRist
- 129 posts since 16 Feb, 2013 from Sydney
I'm getting a odd, occasional, problem with the new build of Zebra2. (32bit VST, Windows, host: Cantible)
When loading a new OSC preset, zebra gets itself confused and starts glitching or 'breaking up'.
The only way to get zebra working again is to stop the host's vst engine and restart it; this can make auditioning new wavetables very painful.
I haven't (yet) managed to identify a specific set of circumstances to repro this problem - sorry
Ed
When loading a new OSC preset, zebra gets itself confused and starts glitching or 'breaking up'.
The only way to get zebra working again is to stop the host's vst engine and restart it; this can make auditioning new wavetables very painful.
I haven't (yet) managed to identify a specific set of circumstances to repro this problem - sorry
Ed
-
- KVRist
- 173 posts since 15 Aug, 2014
A PROBLME WITH THE TapMap
some of my preset have tapmap drew instead cosine , when i open the preset its sound totally different , its like a B̀̄̂̐U̔ͬ͗̄͆̈́̅̓͗̏͛͌́̇͒̑G͋̑͊̊̇́̓͐ͯ̅̀͛̐ͬ̋ͤ͋ or something,
So I have to go to MAPPINg GENERATORS and Lower one line and then it works.
When I keep the same kind of preset and i switch between them its working. v( ‘.’ )v
some of my preset have tapmap drew instead cosine , when i open the preset its sound totally different , its like a B̀̄̂̐U̔ͬ͗̄͆̈́̅̓͗̏͛͌́̇͒̑G͋̑͊̊̇́̓͐ͯ̅̀͛̐ͬ̋ͤ͋ or something,
So I have to go to MAPPINg GENERATORS and Lower one line and then it works.
When I keep the same kind of preset and i switch between them its working. v( ‘.’ )v
-
- KVRAF
- 13782 posts since 19 Jun, 2008 from Seattle
But ^^^ THAT ~ looks cool!!!kyhon wrote:A PROBLME WITH THE TapMap
B̀̄̂̐ U̔ͬ͗̄͆̈́̅̓͗̏͛͌́̇͒̑ G͋̑͊̊̇́̓͐ͯ̅̀͛̐ͬ̋ͤ͋ ....
I'm not a musician, but I've designed sounds that others use to make music. http://soundcloud.com/obsidiananvil
-
- KVRian
- 1025 posts since 1 Mar, 2003 from Exmoor
possible bug in Zebra2: On loading Osc2, by default it is set to dual, with some detune and vibrato. Also, it has a LfoG1 attached. The other 3 Osc's load as expected. (win8.1 64bit)
Edit: It might have something to do with an old init patch I use as this behaviour doesn't seem to happen in other patches, though the default state of newly added osc's isn't always consistent.
On further investigation it seems that if you add an osc, adjust some parameters and delete it. If you then re-add it, it will load with the parameters as previously set.
Edit: It might have something to do with an old init patch I use as this behaviour doesn't seem to happen in other patches, though the default state of newly added osc's isn't always consistent.
On further investigation it seems that if you add an osc, adjust some parameters and delete it. If you then re-add it, it will load with the parameters as previously set.
γνῶθι σαὐτόν
-
- KVRAF
- 24415 posts since 7 Jan, 2009 from Croatia
Zebra.data\Data\Modules is not necessary.