So I made a drywet button as first parameter using a mixer at last part of the chain blending everything in. This is a basic deeser with Dry/Wet button I'm trying to make.
So we really have to make this kind of button for every presets me make right ?
I inverted inputs so that one input closes when the other one opens. My problem is that when volumes meets in the middle the sound is quieter, very noticeable lost of DB until it goes back to normal when full dry or full wet. Unless I turn on AGC. I put a output gain button to compensate but is'nt there a better way to do this ?
Or is this Kosher and I can use this technique for more presets?
DryWet button MXXX
-
- KVRian
- 923 posts since 8 Aug, 2011
You do not have the required permissions to view the files attached to this post.
Win11, 16 Gig RAM, Intel i7 Quad 3.9, Reaper 7.16, RME Hamerfall HDSP9652, Steinberg MR816x
-
- KVRian
- 1094 posts since 23 Sep, 2006
I believe this is what the 'ratio' module is for. Send the dry and wet signal to the ratio and use the 'ratio' control for your wet/dry control. Then you can change the curve to specify how it changes from wet to dry. I believe the default 'constant power' should create no 'hole in the middle' effect.
-
- KVRian
- Topic Starter
- 923 posts since 8 Aug, 2011
Thank You!!
Now that it works as I want it to, The Dry/Wet control is something that would not be needed for that particular chain but I only put it there because it is requested but that can create a phase problem between dry and wet when normally ,the regular chain has no phase problem.
Any thoughts ??
Now that it works as I want it to, The Dry/Wet control is something that would not be needed for that particular chain but I only put it there because it is requested but that can create a phase problem between dry and wet when normally ,the regular chain has no phase problem.
Any thoughts ??
You do not have the required permissions to view the files attached to this post.
Win11, 16 Gig RAM, Intel i7 Quad 3.9, Reaper 7.16, RME Hamerfall HDSP9652, Steinberg MR816x
-
MeldaProduction MeldaProduction https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=176122 - KVRAF
- 14339 posts since 15 Mar, 2008 from Czech republic
Ok, so first, you wouldn't need 2 mixers in the one above - right click on a mixer and you can enable each input, so technically you can mix all of them in one go.
To the second go: "Ratio by input" is very bad choice is the "ratio" itself is controlled by the 3rd input of the processor. But normal Ratio, which is for that indeed, wouldn't do the trick neither because of the phase issues. All you need really is the Dry/wet of the processors in the chain. Basically the Eq & Crossover would cause a phase shift, so mixing it with the original isn't and option. But both Eq & Dynamics have a Dry/wet controller, so you just need to map your Dry/wet to all of them. Hence no real "dry" signal goes through, you let the processors do the job.
To the second go: "Ratio by input" is very bad choice is the "ratio" itself is controlled by the 3rd input of the processor. But normal Ratio, which is for that indeed, wouldn't do the trick neither because of the phase issues. All you need really is the Dry/wet of the processors in the chain. Basically the Eq & Crossover would cause a phase shift, so mixing it with the original isn't and option. But both Eq & Dynamics have a Dry/wet controller, so you just need to map your Dry/wet to all of them. Hence no real "dry" signal goes through, you let the processors do the job.
-
- KVRian
- Topic Starter
- 923 posts since 8 Aug, 2011
I think I have the basics covered now. I sent you 3 presets for seal of approval...I'm moving to some new interesting stuff...heyhey! I have all week off and giving it a solid go ! 
You do not have the required permissions to view the files attached to this post.
Win11, 16 Gig RAM, Intel i7 Quad 3.9, Reaper 7.16, RME Hamerfall HDSP9652, Steinberg MR816x
-
MeldaProduction MeldaProduction https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=176122
- KVRAF
- 14339 posts since 15 Mar, 2008 from Czech republic
Cool, I'll check them out when possible. Probably tomorrow... I'm swamped 
...
...