MuTools

Taifunk · Post by **Taifunk** » Tue Jan 10, 2017 12:51 am

Thanks for the latest updates Jo,
I have to report an issue with the sequence player,inside the polysynth the play cursor not work,the module works but not show any graphic animation.

I'm a bit late but I take this opportunity to wish you all a wonderful New Year 2017!

MuTools · Post by **MuTools** » Tue Jan 10, 2017 1:28 pm

Nychthemeron wrote:Now I can't recreate the crash but I dropped a few different filters in the same slot after eachother and then did undo twice and it crashed, stupid of me not to immediatly copy the report I can't recreate it.. so that's not a real issue. Yes I'm on mac and I redownloaded and replaced the the app file twice to make sure, the splash clearly says 7.2.22 upon startup but when I drop a new device in a rack slot (even in a new project) I can't undo it anymore.
I don't understand what happened, the crash happened in project I made in the previous version (7.2.21) could that have anything to do with it?
anyway as I said don't worry about it maybe it will solve itself in the next update it's not a major issue but It's just mind boggling

Ok, found the case, it's indeed when dropping a module onto a rack. Fixed in the next version. Thx for reporting this.

MuTools · Post by **MuTools** » Tue Jan 10, 2017 1:34 pm

Taifunk wrote:Thanks for the latest updates Jo,
I have to report an issue with the sequence player,inside the polysynth the play cursor not work,the module works but not show any graphic animation.

Can't repeat that. Note that the step sequencer needs note input in order to play it and there should be at least one note in the step sequencer. (maybe i can avoid that last condition in some future version but that's less priority atm)

I'm a bit late but I take this opportunity to wish you all a wonderful New Year 2017!

Oh didn't we already wish eachother the best for 2017? Anyway, thanks! Also my best wishes to you too! Have a wonderful creative and fun 2017!

Taifunk · Post by **Taifunk** » Tue Jan 10, 2017 2:18 pm

mutools wrote:
Taifunk wrote:I'm a bit late but I take this opportunity to wish you all a wonderful New Year 2017!
Oh didn't we already wish eachother the best for 2017? Anyway, thanks! Also my best wishes to you too! Have a wonderful creative and fun 2017!

I just got back from Christmas break:)
Thanks Jo, I wish the same to you

mutools wrote:
Taifunk wrote:Thanks for the latest updates Jo,
I have to report an issue with the sequence player,inside the polysynth the play cursor not work,the module works but not show any graphic animation.
Can't repeat that. Note that the step sequencer needs note input in order to play it and there should be at least one note in the step sequencer. (maybe i can avoid that last condition in some future version but that's less priority atm)

Yesterday I wrote in very bad words from the smartphone,I try to explain what I mean,
as you can see in the video, the player on the left (outside the polysynth)shows the play cursor,
in the player on the right(inside the polysynth) this not work,both are connected properly to the event input.

SQP TEST.zip

MuTools · Post by **MuTools** » Tue Jan 10, 2017 2:56 pm

Sorry i misread, you were indeed pointing to the sequence player. Can repeat it. Fixed in the next version. Thx!

MuTools · Post by **MuTools** » Tue Jan 10, 2017 4:27 pm

There are new MuLab 7.2.23 packages in http://www.mutools.com/galaxa/

What's new:

Dropping a module, MUX preset or VST onto a rack now is an undoable step. At the same time this also fixes a potential crash issue when undoing related steps.
Sequence Player: When used inside the PolySynth the sequence editor was not showing the play position. Fixed.

How to install:

Windows: Put the new .exe and .id files into an existing M7.2 installation folder.
Mac: Put the new .app file into an existing M7.2 installation folder.

Nychthemeron · Post by **Nychthemeron** » Tue Jan 10, 2017 9:54 pm

mutools wrote:
Nychthemeron wrote:Now I can't recreate the crash but I dropped a few different filters in the same slot after eachother and then did undo twice and it crashed, stupid of me not to immediatly copy the report I can't recreate it.. so that's not a real issue. Yes I'm on mac and I redownloaded and replaced the the app file twice to make sure, the splash clearly says 7.2.22 upon startup but when I drop a new device in a rack slot (even in a new project) I can't undo it anymore.
I don't understand what happened, the crash happened in project I made in the previous version (7.2.21) could that have anything to do with it?
anyway as I said don't worry about it maybe it will solve itself in the next update it's not a major issue but It's just mind boggling
Ok, found the case, it's indeed when dropping a module onto a rack. Fixed in the next version. Thx for reporting this.

Wow that's very nice

I couldn't even give a decent description of what happened. Thx man

magicmusic · Post by **magicmusic** » Tue Jan 17, 2017 2:33 pm

when have 2 vsti (instrument) in 1 rack no vsti play, even if i press disable button to disable 1 vsti, is it possible that more vsti can work in 1 rack ?. it is usefull to test diffrent sounds easy, or layer sounds. in ;MUX is same problem

runaudio · Post by **runaudio** » Tue Jan 17, 2017 2:58 pm

magicmusic wrote:when have 2 vsti (instrument) in 1 rack no vsti play, even if i press disable button to disable 1 vsti, is it possible that more vsti can work in 1 rack ?. it is usefull to test diffrent sounds easy, or layer sounds. in ;MUX is same problem

magicmusic · Post by **magicmusic** » Tue Jan 17, 2017 8:27 pm

ok, that work too, but with rack it is more easy to change sounds because i need not wire when i choose a new vsti in browser. in reaper it is possible to switch every line on or off. there can be 2 or more vsti and it work ok. i use several racks for rapid composer and every midi channel is split to a own rack

bibz1st · Post by **bibz1st** » Tue Jan 17, 2017 8:43 pm

The attached also works. Obviously just replace the mux synth with your vst

magicmusic · Post by **magicmusic** » Wed Jan 18, 2017 4:13 pm

thanks, i see in your wire what the problem is. midi and audio is not connect to go through. when in slot is a musynth instrument then it not work. I add audio out and midi out to test it in mulab. see screenshot. it work. but is it not possible with a change in rack that it work automatic. ?. for example when a rack slot is switch to off, data from midi in is send to midi out of this rack slot. same with audio

bibz1st · Post by **bibz1st** » Wed Jan 18, 2017 5:29 pm

Unfortunately I don't think that is possible but if anyone else knows another way.....

magicmusic · Post by **magicmusic** » Wed Jan 18, 2017 5:52 pm

I mean with a change in rack, if Jo can add it easy in mux/mulab. in reaper work this way too.

MuTools · Post by **MuTools** » Fri Feb 10, 2017 2:20 am

There are new MuLab 7.2.24 packages in http://www.mutools.com/galaxa/

What's new:

Popup value dialogs could be positioned on a improper position. Fixed.
Added protection against resizing the top of a window into the non-accessible area of the main screen, eg avoid dragging the top of a window under the MacOS title bar area.
Added "Right-Click Deletes Notes" preference.
Text inputs: Improved and more compliant behavior, including support for undo, stepping/selecting thru words by holding Ctrl, ...
VST editors: Finetuned layout when the VST editor itself is smaller than the minimum width for the host wrapper window.
More detailed log file.

How to install:

Windows: Put the new .exe and .id files into an existing M7.2 installation folder.
Mac: Put the new .app file into an existing M7.2 installation folder.