Latest News: u-he releases Sugar and Spice for Hive 2
Bazille FR: add lower quality mode
- KVRAF
- Topic Starter
- 2266 posts since 16 May, 2004 from Soviet Union
Hi
If possible please would be good add some rough quality mode like Draft in ACE (or Draft and Standart, if current "Good" in Bazille higher than ACE "Standart").
Really cool sound but not all time need such great quality and clean high frequencies (sometime even vice versa), while the most Bazille patches eat cpu excessively, in many cases even with disabled high quality mode.
If possible please would be good add some rough quality mode like Draft in ACE (or Draft and Standart, if current "Good" in Bazille higher than ACE "Standart").
Really cool sound but not all time need such great quality and clean high frequencies (sometime even vice versa), while the most Bazille patches eat cpu excessively, in many cases even with disabled high quality mode.
-
- KVRist
- 385 posts since 16 Mar, 2015
Then I will suggest adding a "divine" mode that is similar to oversampling the plugin. Aliasing was reduced when I set the whole project to 192kHz, but that's not so practical.
-
- KVRAF
- 2094 posts since 24 Jun, 2006 from London, England
Yeah CPU wise, HQ switched on with Bazille gives me CPU usage comparable to 'Good' on Diva - HQ switched off gives me around the same CPU use as 'Draft' on Diva.omiroad wrote:Then I will suggest adding a "divine" mode that is similar to oversampling the plugin. Aliasing was reduced when I set the whole project to 192kHz, but that's not so practical.
So yeah rather than add a 'lower quality' mode which essentially is the HQ Mode off, I'd be ace to have a Super-HQ mode for rendering usage a la Divine mode in Diva
- u-he
- 28089 posts since 8 Aug, 2002 from Berlin
ACE was the first plug-in I did a draft-type mode for, which is low to no oversampling. The problem with this is that filter tuning is inherently off. So if you switch between modes, the sound can be different. In ACE that is kind of okay because the quality is saved with preset (which for several other reasons I find questionable).c_voltage wrote:Hi
If possible please would be good add some rough quality mode like Draft in ACE (or Draft and Standart, if current "Good" in Bazille higher than ACE "Standart").
Really cool sound but not all time need such great quality and clean high frequencies (sometime even vice versa), while the most Bazille patches eat cpu excessively, in many cases even with disabled high quality mode.
In Diva we made sure that the ZDF modes (good, great, divine) sound as identical as possible. We called the lowest quality "draft" instead of "standard" simple because it does sound different and isn't meant to be used for rendering. We also added it so people can hear for themselves what ZDF does for them and why the CPU usage is justified. Still, even draft mode is 2x or 4x oversampled, depending on algorithms used.
Differences in sound, especially tuning, have turned out to be issues. We have had a lot of explaining to do over the years.
When Bazille's HQ mode is off, it's only 2x oversampled. Going lower would sound considerably different. There's a good chance that filters could explode and aliasing might become unbearable. I'm not sure it's a good idea, but I'll be happy to try. However, experience tells me it might do more harm than good, hence my reluctance.
- KVRAF
- Topic Starter
- 2266 posts since 16 May, 2004 from Soviet Union
Hmm ok got it, then i rely on your vision of this moment.Urs wrote:When Bazille's HQ mode is off, it's only 2x oversampled. Going lower would sound considerably different. There's a good chance that filters could explode and aliasing might become unbearable. I'm not sure it's a good idea, but I'll be happy to try. However, experience tells me it might do more harm than good, hence my reluctance.
- KVRAF
- 9077 posts since 28 May, 2005 from Netherneverlands
Might be an interesting case for Urs to try it out though,just to be sure. Maybe.. just maybe.. it might work, hehe
Lots of hobbyists around with not so great system specs.. for those it could matter.
Lots of hobbyists around with not so great system specs.. for those it could matter.
No band limits, aliasing is the noise of freedom!
- KVRAF
- Topic Starter
- 2266 posts since 16 May, 2004 from Soviet Union
Though my specs really slightly outdated, i believe also modern cpu users would be glad to use such "session" feature, when the main sound idea is still keep, but at the same time a much more freedom of action, that can inspire no worse than precision frequencies in real time.Nielzie wrote:Lots of hobbyists around with not so great system specs.. for those it could matter.
In the end, the maximum quality can always be set for the final render.
(But of course, again if talk about a some technical issue for implement, then perhaps this is not a justified sacrifice.)
-
- KVRist
- 385 posts since 16 Mar, 2015
Can you comment on the possibility of a super HQ/divine mode for even more oversampling for Bazille? I thought 192kHz took care of the aliasing very well. It would mostly be used for rendering.Urs wrote:When Bazille's HQ mode is off, it's only 2x oversampled. Going lower would sound considerably different. There's a good chance that filters could explode and aliasing might become unbearable. I'm not sure it's a good idea, but I'll be happy to try. However, experience tells me it might do more harm than good, hence my reluctance.
- KVRAF
- 4130 posts since 11 Aug, 2006 from Texas
In my opinion I prefer Urs' current approach of no-compromise on CPU for sound quality.Nielzie wrote:Lots of hobbyists around with not so great system specs.. for those it could matter.
If those a hobbyist passes on Bazille (or Diva, etc) because it hits their older CPU too hard I question their desire to actually use the product. If that person is willing to invest several hundred dollars in a synth they should likewise be willing to invest in periodic computer upgrades.
Programming compromises or other draft modes into products takes time away from adding interesting features that actually contribute to the sound/DSP engine. Every knob/slider/switch in a commercial product adds to the quality control, testing, GUI design, documentation, and eventual support. My current PC is a Core i7 from 2013 and still runs Diva and Bazille well (at least for a single instance of each).
Feel free to call me Brian.
- u-he
- 28089 posts since 8 Aug, 2002 from Berlin
There's a possibility, sure. Can't say if/how/when at this point of time though.omiroad wrote:Can you comment on the possibility of a super HQ/divine mode for even more oversampling for Bazille?
- KVRAF
- Topic Starter
- 2266 posts since 16 May, 2004 from Soviet Union
Here is a need clarify - ofcourse, i would not want that developer spend time for task of just a few users with old computers, but before composing a query i supposed that this moment also can be actual for modern cpu users (since we are talk about one of most heavy synths for cpu on market). But if i'm wrong, ie if all smooth on i5-i7, then my apology.bmrzycki wrote:In my opinion I prefer Urs' current approach of no-compromise on CPU for sound quality.Nielzie wrote:Lots of hobbyists around with not so great system specs.. for those it could matter.
If those a hobbyist passes on Bazille (or Diva, etc) because it hits their older CPU too hard I question their desire to actually use the product. If that person is willing to invest several hundred dollars in a synth they should likewise be willing to invest in periodic computer upgrades.
Programming compromises or other draft modes into products takes time away from adding interesting features that actually contribute to the sound/DSP engine. Every knob/slider/switch in a commercial product adds to the quality control, testing, GUI design, documentation, and eventual support. My current PC is a Core i7 from 2013 and still runs Diva and Bazille well (at least for a single instance of each).
- KVRAF
- 25606 posts since 3 Feb, 2005 from in the wilds
Additions I'd love to see for a Bazille upgrade someday in the future...Urs wrote:There's a possibility, sure. Can't say if/how/when at this point of time though.omiroad wrote:Can you comment on the possibility of a super HQ/divine mode for even more oversampling for Bazille?
An additional filter model as an option.
Each Osc to have a quantizer built into it.
Few interesting new waveform types.
Ability to modulate sequencer speed.
More FX - so the same 4 slots, but a variety of choices (i.e. ResQ and Drench)
-
- KVRist
- 385 posts since 16 Mar, 2015
Cool. It's already a quality synth so I'll just take it as it comes.Urs wrote:There's a possibility, sure. Can't say if/how/when at this point of time though.omiroad wrote:Can you comment on the possibility of a super HQ/divine mode for even more oversampling for Bazille?
-
- KVRer
- 19 posts since 17 Jun, 2008 from RSA
i like bazille
please just update bazille
I cant use this synth - cpu is too high
bazille is literally the best synth - just unusable and hasnt been updated since 2015
please just update bazille
I cant use this synth - cpu is too high
bazille is literally the best synth - just unusable and hasnt been updated since 2015
- KVRAF
- 5684 posts since 25 Dec, 2004
i own a mid 2012 macbook and i get less max-outs with Bazille than i did with Diva
sketches... http://soundcloud.com/onesnzeros
some artists i support... https://bandcamp.com/spectraselecta
some artists i support... https://bandcamp.com/spectraselecta