Xhun Audio LittleOne : version 4.x Released

[pekbro]

yes, if I understood fine it is the correct behaviour. At host reset, LittleOne switch back to its first section "A", but it is only a "GUI change". No parameters are affected.
The host reset occurs when you press play on the transport bar for example. If you press play on the transport and then select the parameters and buttons/knobs on
LittleOne (in this case the Section buttons), you are able to edit them and change their value.

Actually, in Reason 9.5 it resets, with or without pressing play. Unless I map a controller
to the panel switch (A, B, or C) or hold the mouse button, I cannot access either panel in Reason.
*Soon as you release the mouse button, the page flips back. You cannot edit parameters on
Page B or C. Win 64, VST 2.4, LittleOne Ver 3.0.5 -3.0.8, Reason 95d241 (build) 8,412.

Thanks for the response.

-Cheers

[xhunaudio]

Ok thank you !

Never heard of something like that, it could be that Reason VST wrapper is very young and has some issues...

I found this thread, here on KVRAudio :

viewtopic.php?f=7&t=485674

Try this : load LittleOne in Reason. The envelope generators switch button should be set to Attack by default. Just push/select the Release switch with a mouse click. Is this parameter selectable? (the Release button should be "on", the Attack button "off" and the knob above should set the Release amount). Let me know

[pekbro]

Try this : load LittleOne in Reason. The envelope generators switch button should be set to Attack by default. Just push/select the Release switch with a mouse click. Is this parameter selectable? (the Release button should be "on", the Attack button "off" and the knob above should set the Release amount). Let me know

Ok, it doesn't work, only the "1-2 sync" "Glide On/Off" and the OS Page buttons work.
All the other buttons revert after releasing the mouse. The knobs seem to work
fine though.

Sry, I guess I never got past the page switch and tried to actually change any settings.

Thanks, I did see that thread. No doubt this is due to a problem with the current
state of their VST implementation. I'm not sure if theres anything you can do.
Thats why I just meant it as an FYI...

-Cheers

[xhunaudio]

Umhh, I don't know exactly...(obviously)...

Probably in Reason (loading VST plugins), when a single parameter is changed, it seems that ALL other parameters are updated as well.

But that's something only they could know for sure.

By the way thank you again for the info,

[xhunaudio]

Message to the World.

I'm posting this infos here on KVRAudio, on all Social Media and elsewhere I'll be able to. Please, I wish the greater number of people will read this...

Please, in order to authorize LittleOne (as well as any other software) it is mandatory to read every-single-step-by-step instruction provided in the document (it is a .pdf included in the installation package).

Reading ALL the instructions requires 30 seconds. After reading ALL the instructions, the authorization procedure for LittleOne will require just 15 seconds and it is extremely, extremely easy to complete.

But it is mandatory to READ and follow all the easy, step-by-step instructions illustrated in the tutorial (again, you can find it in a .pdf file included in the installation package).

Please, reading the instructions is extremely useful and requires just a bunch of seconds in your life. It is not wasted time. Read it once, authorize LittleOne in 15 seconds and then forget about it and play your fully working synth for the rest of your life.

Thank you.

[pekbro]

Just to be fair, I didn't have any trouble personally. However, had I followed
the included instructions to the letter, the authorization would have failed.

You cannot count on everyone using default directories, or even that those
defaults will be named exactly as you state in the instructions. They are not
for me, not even one.

Anyway, you really should let people choose where to install things and
allow us to point LittleOne in the correct direction.

Just sayin...

-Cheers

[xhunaudio]

Hi pekbro,

really, no one ever had any kind of issue with the plugin *installation*. There's a recommended directory/path where files *should* be installed, but you can always install the plugin where you prefer, IF THE FORMAT LET YOU DO THAT (example : with Audio Units you can't do it, because Apple decided so - and it makes sense).

I'm talking about products Authorization. Anyone is able to install the plugin. So the Operating System language and similar is not an issue (obviously I'll describe that using the English OS version words). Very easy to understand - not Shakespeare, just a few instructions

The point is that the Activation is not performed at all, and that in the most cases is due exclusively to a missing instructions reading.

Then, I receive "screaming emails" (just in a few cases ).

" IT DOESN'T WORK, IT DOESN'T WORK ! Aaaaaarghhhhhhhh ! "

And then, if I just copy/paste the exact words found in the tutorial, into my reply email, the Users are able to complete the Activation in one minute. That means that instructions were simply not read previously...

No problem to help Customers, but everything could be much easier for everyone by following instructions.

[pekbro]

Ahh, that does sound like an unfortunate situation. I guess it surprises
me that people wouldn't figure that much for themselves.

-Cheers

[xhunaudio]

Message to the World, part 2 (just to avoid misunderstandings) :

Everyone is welcome to contact me about any matter, I always give my support to Customers.

But please before doing that be sure to read all the provided instructions

[Vocel]

Promised some time ago, here it is finally, the first third party set for v3. Thousand thanks to Bruno for his enormous support!

"220V" - 220 Versatile Sequences for your beloved LittleOne v3

The pack introduces an impressive number of electrifying sequences to make a great melody line, punchy bass flow, aggressive 'Tube' sequences, leading dance motives or even ambient backgrounds. Everything from an analogue heart of LittleOne.

Discount Price: $ 17.99 | Regular price: $26.00

Here: See the bank

Video here: https://youtu.be/uHhD8R1v_lg

[JerGoertz]

Since someone bumped the thread, I wanted to recount my recent experiences with LOv3:

Still sounds amazing. The preset-recall issue in Cubase seems to be infrequent enough that I can live with it (for now). Quite seriously, I would put LOv3's sound quality up against anything else on the market, and I have quite a few of the top contenders (Diva, Legend, Monark, etc.).

[xhunaudio]

Ohh, what a nice surprise today !

@Vocel : Thank you Daniel for every single preset of your commercial expansion for LittleOne, very nice indeed !

@Jeremiah : I don't remember exactly, if you mean the "click the button once, advance 2 presets" issue, it happens only with the VST3 version (due to some issue in WDL-OL with VST3 format - read this : http://www.xhun-audio.com/site/xhun.php?page=support).

VST2 and AU version are safe, so it is recommended to use this versions to avoid this GUI issue with VST3. By the way I'm pleased you appreciate LittleOne !

[Vocel]

Just to remind you there is a (brand) new bank of 220 Sequences... but you probably already know that

http://www.stawczyk.com/220v.php

...still an introductory price of $17.99. People say they enjoy that. Quality and the price of course

[xhunaudio]

I'll just post a link to all current LittleOne audio demos to let KVRAudio tracker to see them. Daniel's 220V audio demos are included.

New updates and expansions for LittleOne will be released soon

http://www.xhun-audio.com/audio/analog_freegures.mp3

http://www.xhun-audio.com/audio/vintage_survival.mp3

http://www.xhun-audio.com/audio/220v_part_1.mp3

http://www.xhun-audio.com/audio/220v_part_2.mp3

Cheers !

[Amram]

whats the price going to be on halloween.
be good