What modern control surface do you guys use with Waveform?
I have a Faderport v2 which has a MCU mode but it doesn't work with Waveform. I'm wondering what you guys use?
Recommended Control Surface
-
- KVRian
- 526 posts since 7 May, 2007 from Angus,Scotland
Not modern,but I'm using a frontier design Tranzport. It doesn't have a fader, but transport control and mute / solo track select etc, all work as they should.
No setting up was required other than installing driver, and selecting it in Waveforms control surfaces.
Unfortunately no longer supported.
I'm on Win 8.1 not sure if you could get drivers to work in Windows 10
http://www.frontierdesign.com/Products/TranzPort
No setting up was required other than installing driver, and selecting it in Waveforms control surfaces.
Unfortunately no longer supported.
I'm on Win 8.1 not sure if you could get drivers to work in Windows 10
http://www.frontierdesign.com/Products/TranzPort
Windows 10 / Intel core i7 2700k @ 3.50GHz / 16GB Ram / Emu 1212m Sound Card / Ati Radeon HD5400 Series G/Card
-
- KVRian
- Topic Starter
- 1097 posts since 27 Nov, 2006
I'm on OSX Mojave so no chance with any Frontier Design stuff 
*edit* I used to have a Alphatrack that worked great with Tracktion way back when. However, I sold that ages ago and despite finding an updated driver provided by Synclavier(!) which may or may not work in the future, I decided it's not worth it.
However, I did notice that the Behringer X-Touch One works with Waveform. It even has an overlay for it. I'm investigating further.
*edit* I used to have a Alphatrack that worked great with Tracktion way back when. However, I sold that ages ago and despite finding an updated driver provided by Synclavier(!) which may or may not work in the future, I decided it's not worth it.
However, I did notice that the Behringer X-Touch One works with Waveform. It even has an overlay for it. I'm investigating further.
Last edited by auricle on Tue Feb 19, 2019 3:13 pm, edited 1 time in total.
-
- KVRian
- 1311 posts since 3 May, 2005 from Victoria, BC
I'm glad you posted you are still using a Tranzport. We were discussing a few weeks ago if we should remove support since the products are no longer available. But if they still work and you're still using it, we will leave it in.
-
- KVRian
- Topic Starter
- 1097 posts since 27 Nov, 2006
Could you add support for the Faderport v2 - even if it's in MCU mode? It doesn't seem to work currently.FigBug wrote: Tue Feb 19, 2019 3:11 pm I'm glad you posted you are still using a Tranzport. We were discussing a few weeks ago if we should remove support since the products are no longer available. But if they still work and you're still using it, we will leave it in.
-
- KVRian
- 526 posts since 7 May, 2007 from Angus,Scotland
Cheers,
yeah works as it's supposed to.
yeah works as it's supposed to.
Windows 10 / Intel core i7 2700k @ 3.50GHz / 16GB Ram / Emu 1212m Sound Card / Ati Radeon HD5400 Series G/Card
-
- KVRian
- 524 posts since 16 Mar, 2017
It's not just the X-Touch One:auricle wrote: Tue Feb 19, 2019 3:05 pm However, I did notice that the Behringer X-Touch One works with Waveform. It even has an overlay for it. I'm investigating further.
https://www.sweetwater.com/sweetcare/ar ... -traction/
-
- KVRian
- 526 posts since 7 May, 2007 from Angus,Scotland
May or may not be of interest, but out of curiosity I installed the drivers for my frontier design Tranzport, on my Win 10 internet computer using compatibility mode, Vista service pack 2! Option.
Showed up in Waveform 10 & 9
and seems to be working as it should.
Tried Win8 option first, but that came up with error message, can't install on this operating system.
I'm sure I'm on the latest Windows 10 build.
Showed up in Waveform 10 & 9
and seems to be working as it should.
Tried Win8 option first, but that came up with error message, can't install on this operating system.
I'm sure I'm on the latest Windows 10 build.
Windows 10 / Intel core i7 2700k @ 3.50GHz / 16GB Ram / Emu 1212m Sound Card / Ati Radeon HD5400 Series G/Card
-
- KVRist
- 72 posts since 12 Feb, 2017
btw synclavier driver still works great on mojave.auricle wrote: Tue Feb 19, 2019 3:05 pm I'm on OSX Mojave so no chance with any Frontier Design stuff
*edit* I used to have a Alphatrack that worked great with Tracktion way back when. However, I sold that ages ago and despite finding an updated driver provided by Synclavier(!) which may or may not work in the future, I decided it's not worth it.
-
- KVRian
- Topic Starter
- 1097 posts since 27 Nov, 2006
Did you have to disable SIP to get it to work? Or did it just install without any workarounds?netsvetaev wrote: Wed Feb 20, 2019 12:22 ambtw synclavier driver still works great on mojave.auricle wrote: Tue Feb 19, 2019 3:05 pm I'm on OSX Mojave so no chance with any Frontier Design stuff
*edit* I used to have a Alphatrack that worked great with Tracktion way back when. However, I sold that ages ago and despite finding an updated driver provided by Synclavier(!) which may or may not work in the future, I decided it's not worth it.
-
- KVRian
- 872 posts since 25 Aug, 2006
Does anyone use any of the other X-Touch controllers?
https://www.sweetwater.com/store/search.php?s=X-touch
https://www.sweetwater.com/store/search.php?s=X-touch
-
- KVRer
- 26 posts since 26 Sep, 2017
I am using an X-Touch. The button's labels don't match up correctly with their actual commands in WF. I made this image to try to keep track of what they should do according to a template I found for using MCU with tracktion.
You do not have the required permissions to view the files attached to this post.
-
- KVRist
- 72 posts since 12 Feb, 2017
I just bought, install it and restart.auricle wrote: Wed Feb 20, 2019 8:45 am Did you have to disable SIP to get it to work? Or did it just install without any workarounds?