FL Studio 20.5 | Introducing a new free plugin FLEX

Plug-in hosts and other software applications discussion
Caine123
KVRAF
5824 posts since 5 Aug, 2009

Post Sun Jul 21, 2019 4:02 am

1. Scott are there any plans for crash recovery/protection?
So if a projects fails to load which worked on closing that as a user i can reload it? Cause the fl diagnostic tool is useless as you dunno which plugin could have caused the plugin. I strongly suggest to demo 5 minutes bitwig.

2. Is there any way to select multiple mixdr channels and add a specific plugin to them at the same time? It is very tedious to make IT seperately for 15 channels.... with plugins like relayer etc it is really needed.

And fl studio piano roll is still unmatched i cannot believe it after 10 years i use it the other daws still suck in this even studio one isnt as fluid and easy and i exclude all the strumming, arp festures.... so congratz.
I still can make a beat in fl studio within 15 mins but it is like a b×tch you cannot trust if it loads properly next time or crashes any second.... and support says always the same to try to a. Reload and older version. B. Try to recreste the project etc... this is nonsense as with a new version of fl studio the same happens again with other projects . So a crash protection/recovery method is needed. Maybe im just the minirity who uses fl studio like a pro as mixing and mastering engineer.... and not only making quick edm beats. Thx
Image-Line wrote:
Sat Jul 20, 2019 10:51 pm
mladi wrote:
Sat Jul 20, 2019 9:28 am
1+
ps. "it just rings alarm bells" geez some people.. :dog:
Some people have been saying Lifetime Free Updates will fail, for 21 years now.

Some people have enjoyed 21 years of free updates and just got FLEX.
And it didnt fail. User since v7 here.
DAW FL Studio Audio Interface Focusrite Scarlett 1st Gen 2i2 CPU Intel i7-7700K 4.20 GHz, RAM 32 GB Dual-Channel DDR4 @2400MHz Corsair Vengeance. MB Asus Prime Z270-K, GPU Gainward 1070 GTX GS 8GB NT Be Quiet DP 550W OS Win10 64Bit

imagination
Banned
9 posts since 20 Jul, 2019

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Sun Jul 21, 2019 8:00 am

Caine123 wrote:
Sun Jul 21, 2019 4:02 am
1. Scott are there any plans for crash recovery/protection?
So if a projects fails to load which worked on closing that as a user i can reload it? Cause the fl diagnostic tool is useless as you dunno which plugin could have caused the plugin. I strongly suggest to demo 5 minutes bitwig.

2. Is there any way to select multiple mixdr channels and add a specific plugin to them at the same time? It is very tedious to make IT seperately for 15 channels.... with plugins like relayer etc it is really needed.

And fl studio piano roll is still unmatched i cannot believe it after 10 years i use it the other daws still suck in this even studio one isnt as fluid and easy and i exclude all the strumming, arp festures.... so congratz.
I still can make a beat in fl studio within 15 mins but it is like a b×tch you cannot trust if it loads properly next time or crashes any second.... and support says always the same to try to a. Reload and older version. B. Try to recreste the project etc... this is nonsense as with a new version of fl studio the same happens again with other projects . So a crash protection/recovery method is needed. Maybe im just the minirity who uses fl studio like a pro as mixing and mastering engineer.... and not only making quick edm beats. Thx
You're right about the piano roll, but I'd like to see more focus on the audio features. I'd like to see things like punch in and out, (vocal) comping, editing on the track list and other linear DAW type features. I really don't enjoy being stuck with using Edison, it feels clunky to me.

+1 for the free updates, it really helps out a broke kid like me.

User avatar
Image-Line
KVRian
988 posts since 2 Dec, 2010 from Belgium, EU.

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Mon Jul 22, 2019 10:46 pm

Caine123 wrote:
Sun Jul 21, 2019 4:02 am
1. Scott are there any plans for crash recovery/protection?

2. Is there any way to select multiple mixdr channels and add a specific plugin to them at the same time?
1. Yes.

2. You mean for multi-out plugins? This is best discussed on Looptalk ...

https://forum.image-line.com/viewforum.php?f=100
Image-Line are proud developers of - FL Studio, FL Studio Mobile & Audio Plugins.

Caine123
KVRAF
5824 posts since 5 Aug, 2009

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Tue Jul 23, 2019 2:02 am

Image-Line wrote:
Mon Jul 22, 2019 10:46 pm
Caine123 wrote:
Sun Jul 21, 2019 4:02 am
1. Scott are there any plans for crash recovery/protection?

2. Is there any way to select multiple mixdr channels and add a specific plugin to them at the same time?
1. Yes.

2. You mean for multi-out plugins? This is best discussed on Looptalk ...

https://forum.image-line.com/viewforum.php?f=100
SCOTT so many thanks, if 1. is achieved please update us here (well i got you all subscribed ;)) i hope it will be this year :P

2. no no, im sadly not in the studio now but imagine this:
you want to add on mixer channel 1 - 15 a plugin e.g. FL Limiter, so far i know you have to add it TO EVERY CHANNEL 1 time, but in Studio One you can mark Channel 1-15 and then just add FL Limiter at the SAME time. without having to do the step for every channel. very time saving!
DAW FL Studio Audio Interface Focusrite Scarlett 1st Gen 2i2 CPU Intel i7-7700K 4.20 GHz, RAM 32 GB Dual-Channel DDR4 @2400MHz Corsair Vengeance. MB Asus Prime Z270-K, GPU Gainward 1070 GTX GS 8GB NT Be Quiet DP 550W OS Win10 64Bit

User avatar
Image-Line
KVRian
988 posts since 2 Dec, 2010 from Belgium, EU.

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Tue Jul 23, 2019 3:25 am

2. I suggest you make some Templates.
Image-Line are proud developers of - FL Studio, FL Studio Mobile & Audio Plugins.

User avatar
Distorted Horizon
KVRAF
2502 posts since 17 Jan, 2017 from Planet of cats

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Tue Jul 23, 2019 3:34 am

2. I suggest you don't put limiter on every channel :lol:

User avatar
phreaque
KVRian
894 posts since 17 Jul, 2007 from Baghdad-Iq

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Tue Jul 23, 2019 3:37 am

Distorted Horizon wrote:
Tue Jul 23, 2019 3:34 am
2. I suggest you don't put limiter on every channel :lol:
:hyper:
Phreaque Modi

Caine123
KVRAF
5824 posts since 5 Aug, 2009

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Tue Jul 23, 2019 3:47 am

Limiter was an example dudes ;D
Image-Line wrote:
Tue Jul 23, 2019 3:25 am
2. I suggest you make some Templates.
:/ shouldnt this be possible in a daw :P
https://answers.presonus.com/19360/add- ... e-channels
DAW FL Studio Audio Interface Focusrite Scarlett 1st Gen 2i2 CPU Intel i7-7700K 4.20 GHz, RAM 32 GB Dual-Channel DDR4 @2400MHz Corsair Vengeance. MB Asus Prime Z270-K, GPU Gainward 1070 GTX GS 8GB NT Be Quiet DP 550W OS Win10 64Bit

xbitz
KVRAF
2524 posts since 3 Oct, 2013 from Budapest

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Tue Jul 23, 2019 4:04 am

btw. templates, the last part of the trance series of Adam Ellis contains a quite usable FL Studio trance template https://www.myloops.net/product/adam-el ... plate-2019
(it has been created to AL, Cubase, Logic, S1 too)
"Where we're workarounding, we don't NEED features." - powermat

quietzone
KVRist
90 posts since 19 Jun, 2019

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Thu Jul 25, 2019 12:42 am

Daru925 wrote:
Wed Jul 17, 2019 11:34 pm
Will Flex be released as a full fledged synth?
+1 for this. Would be awesome if there was an advanced mode for those of us that would like to dive deeper into FLEX.

tony10000
KVRist
445 posts since 4 Aug, 2017

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Thu Jul 25, 2019 1:36 am

quietzone wrote:
Thu Jul 25, 2019 12:42 am
Daru925 wrote:
Wed Jul 17, 2019 11:34 pm
Will Flex be released as a full fledged synth?
+1 for this. Would be awesome if there was an advanced mode for those of us that would like to dive deeper into FLEX.
They already have programmable synths that can do the same kinds of sounds. Sytrus and Harmor.

User avatar
Distorted Horizon
KVRAF
2502 posts since 17 Jan, 2017 from Planet of cats

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Thu Jul 25, 2019 2:03 am

quietzone wrote:
Thu Jul 25, 2019 12:42 am
Daru925 wrote:
Wed Jul 17, 2019 11:34 pm
Will Flex be released as a full fledged synth?
+1 for this. Would be awesome if there was an advanced mode for those of us that would like to dive deeper into FLEX.
Which would cost.. 169€?

User avatar
Daru925
KVRist
256 posts since 20 Mar, 2015 from Nerima, Tokyo

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Thu Jul 25, 2019 2:21 am

Yes, why not release a full version inside fl alongside sytrus and harmor, if flex is a real synth, and not just some nexus-like preset player? That way people who use presets are happy, and people who like to create their own patches would be happy too.
Just a suggestion.

xbitz
KVRAF
2524 posts since 3 Oct, 2013 from Budapest

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Thu Jul 25, 2019 2:37 am

^^^
Do Business Like A Drug Dealer

Word of mouth is the best form of marketing
Freemium models can be very lucrative
etc.
>>
https://www.quicksprout.com/do-business ... ug-dealer/ ... no offense :D
"Where we're workarounding, we don't NEED features." - powermat

quietzone
KVRist
90 posts since 19 Jun, 2019

Re: FL Studio 20.5 | Introducing a new free plugin FLEX

Post Thu Jul 25, 2019 2:49 am

Distorted Horizon wrote:
Thu Jul 25, 2019 2:03 am
quietzone wrote:
Thu Jul 25, 2019 12:42 am
Daru925 wrote:
Wed Jul 17, 2019 11:34 pm
Will Flex be released as a full fledged synth?
+1 for this. Would be awesome if there was an advanced mode for those of us that would like to dive deeper into FLEX.
Which would cost.. 169€?
That'd be fine. Get it at a 40% off sale and it'd be a welcome addition to have an advanced mode where you can pick up where the preset designers left off and go on from there. I mean with the ability to tweak and have acccess to the exact set of parameters as those available to the preset designers. That way you can use FLEX in it's simple form like it is now, but dive in to tweak stuff when you need it.

Return to “Hosts & Applications (Sequencers, DAWs, Audio Editors, etc.)”