Non, you can untick every harmony, I did it yesterday.
Genesis Pro
-
- KVRian
- 504 posts since 27 Feb, 2007
Ah i wish samples were normalized, volume is all over the place , i hope he will fix that before attempting to release soundbanks.
I started making some patches
https://soundcloud.com/bwwd/genesis-guitar-strings
https://soundcloud.com/bwwd/genesis-piano-patch
I started making some patches
https://soundcloud.com/bwwd/genesis-guitar-strings
https://soundcloud.com/bwwd/genesis-piano-patch
-
- KVRian
- 879 posts since 22 May, 2013 from Gent, Belgium
Ok I installed, but couldn't specify where. I've found the files in
C:\Program Files (x86)\GenesisPro\System
but where is the dll?
C:\Program Files (x86)\GenesisPro\System
but where is the dll?
My sounddesign: Synth1/Ex5/D-50 patches https://goo.gl/zE3pkk
My stuff: W10x64i7 15" laptop, Reaper/Cantabile3+Synth1+Avenger on stage+NordStage2+Samson Graphite 49
Loving new VPS Avenger! Check my skins! https://goo.gl/MBNJHj
My stuff: W10x64i7 15" laptop, Reaper/Cantabile3+Synth1+Avenger on stage+NordStage2+Samson Graphite 49
Loving new VPS Avenger! Check my skins! https://goo.gl/MBNJHj
-
- KVRist
- 55 posts since 26 Jan, 2020
-
- KVRian
- 879 posts since 22 May, 2013 from Gent, Belgium
Wonderfull synth !
My sounddesign: Synth1/Ex5/D-50 patches https://goo.gl/zE3pkk
My stuff: W10x64i7 15" laptop, Reaper/Cantabile3+Synth1+Avenger on stage+NordStage2+Samson Graphite 49
Loving new VPS Avenger! Check my skins! https://goo.gl/MBNJHj
My stuff: W10x64i7 15" laptop, Reaper/Cantabile3+Synth1+Avenger on stage+NordStage2+Samson Graphite 49
Loving new VPS Avenger! Check my skins! https://goo.gl/MBNJHj
-
- KVRist
- 259 posts since 25 Oct, 2008
Pet hate of mine installers not giving you the option of where to install then distributing their contents all over your hard drive.
-
- KVRian
- 879 posts since 22 May, 2013 from Gent, Belgium
Yeah I'd love to move the content to other locations also, it's certainly a reason why I would remove the synth, because I need my space on my startup SSD.
Kudos to Ozcam, the sound design is super !!! Very inspiring and retro dance sounds ! Love it
Kudos to Ozcam, the sound design is super !!! Very inspiring and retro dance sounds ! Love it
My sounddesign: Synth1/Ex5/D-50 patches https://goo.gl/zE3pkk
My stuff: W10x64i7 15" laptop, Reaper/Cantabile3+Synth1+Avenger on stage+NordStage2+Samson Graphite 49
Loving new VPS Avenger! Check my skins! https://goo.gl/MBNJHj
My stuff: W10x64i7 15" laptop, Reaper/Cantabile3+Synth1+Avenger on stage+NordStage2+Samson Graphite 49
Loving new VPS Avenger! Check my skins! https://goo.gl/MBNJHj
-
- KVRist
- 55 posts since 26 Jan, 2020
Hi guys,
I figured out how to run Genesis Pro in 64-bit-only DAW without any crackles!!!
Instead of using jBridge, use this app TBridge (introduced in this topic viewtopic.php?f=22&t=541622), which is based on NetVST and built recently. Currently the default language is Chinese and it has bugs in changing language to English, but by seeing the tutorials on it's official site I was able to figure out working with it. I just started using it on Waveform 11 (64-bit) which does not have native bridging. I loaded Genesis Pro through TBridge and everything worked perfectly (except license error etc. which y'all know).
I have not tried yet closing and saving, so don't know if it's be able to save the plugin parameters. Also, couldn't figure out how to sync tempo to the host DAW.
I figured out how to run Genesis Pro in 64-bit-only DAW without any crackles!!!
Instead of using jBridge, use this app TBridge (introduced in this topic viewtopic.php?f=22&t=541622), which is based on NetVST and built recently. Currently the default language is Chinese and it has bugs in changing language to English, but by seeing the tutorials on it's official site I was able to figure out working with it. I just started using it on Waveform 11 (64-bit) which does not have native bridging. I loaded Genesis Pro through TBridge and everything worked perfectly (except license error etc. which y'all know).
I have not tried yet closing and saving, so don't know if it's be able to save the plugin parameters. Also, couldn't figure out how to sync tempo to the host DAW.
- KVRist
- 414 posts since 21 Jan, 2007
Does anybody have a copy of the instruction manual? I just want to look at the features at a glance.
-
- KVRAF
- 8519 posts since 7 Apr, 2003
has anyone figured out how to tune the oscillators with cents independent from each other?
-
- KVRAF
- 8519 posts since 7 Apr, 2003
for me all i had to do was this:Sughosha wrote: ↑Fri Mar 20, 2020 4:43 pm Hi guys,
I figured out how to run Genesis Pro in 64-bit-only DAW without any crackles!!!
Instead of using jBridge, use this app TBridge (introduced in this topic viewtopic.php?f=22&t=541622), which is based on NetVST and built recently. Currently the default language is Chinese and it has bugs in changing language to English, but by seeing the tutorials on it's official site I was able to figure out working with it. I just started using it on Waveform 11 (64-bit) which does not have native bridging. I loaded Genesis Pro through TBridge and everything worked perfectly (except license error etc. which y'all know).
I have not tried yet closing and saving, so don't know if it's be able to save the plugin parameters. Also, couldn't figure out how to sync tempo to the host DAW.
jbridge settings > performance mode (ignore warning)
then it worked without crackles.
- KVRist
- 230 posts since 9 Mar, 2017
You can use the NetVST tools without TBridge. As far as I can tell, all TBridge adds is a Chinese-language interface and a simple VST browser. It's basically a kind of wrapper around NetVSTHost.exe, which is the actual networked VST host.Sughosha wrote: ↑Fri Mar 20, 2020 4:43 pm Hi guys,
I figured out how to run Genesis Pro in 64-bit-only DAW without any crackles!!!
Instead of using jBridge, use this app TBridge (introduced in this topic viewtopic.php?f=22&t=541622), which is based on NetVST and built recently. Currently the default language is Chinese and it has bugs in changing language to English, but by seeing the tutorials on it's official site I was able to figure out working with it. I just started using it on Waveform 11 (64-bit) which does not have native bridging. I loaded Genesis Pro through TBridge and everything worked perfectly (except license error etc. which y'all know).
I have not tried yet closing and saving, so don't know if it's be able to save the plugin parameters. Also, couldn't figure out how to sync tempo to the host DAW.
Performance is indeed less crackly than with jBridge, but I wasn't satisfied I was hearing NO crackles, though, so I just did some detailed experiments and determined that the few crackles I was hearing actually come from Genesis Pro itself. Its sample-playback engine appears to produce occasional discontinuities, either because of poorly-chosen loop points or perhaps bad code. Putting an oscilloscope on the output also shows frequent hard clipping in some patches, but this may be intentional, i.e. part of the sound design.
I'm the developer behind NetVST, but I haven't touched it for quite some time, as I'm busy working on a product called Unify (viewtopic.php?f=1&t=535636). A future version of Unify will have NetVST-based networking built-in, and will, I hope, address many of NetVST's limitations.
The NetVST tools are very basic. They don't support saving plug-in state, host automation, or even sample rates other than 44.1 kHz. When I wrote the NetVST code, I didn't know nearly as much about audio programming as I do now. On the plus side, NetVST does allow you to access Windows-only VSTs across a LAN, even from a Mac.
-
- KVRAF
- 1702 posts since 2 Jul, 2007
I'm playing with Genesis on a fairly older model pc windows 10 (i7 4790k ) with antelope discrete 8 @64 samples, using jbridge
( latest version 1.75 ) with performance mode enabled actually in Unify and have absolutely no pops and clicks whatsoever going on here.Jbridge does have some tweaks users can attempt to try to get it smoother.
( latest version 1.75 ) with performance mode enabled actually in Unify and have absolutely no pops and clicks whatsoever going on here.Jbridge does have some tweaks users can attempt to try to get it smoother.
INTERFACE: RME ADI-2/4 Pro/Antelope Orion Studio Synergy Core/BAE 1073 MPF Dual/Heritage Audio Successor+SYMPH EQ
SYNTHS: Korg Kronos X 88/Yamaha Montage M8x/Sequential Trigon 6/
Behringer DM12D/Pro-800
SYNTHS: Korg Kronos X 88/Yamaha Montage M8x/Sequential Trigon 6/
Behringer DM12D/Pro-800
-
- KVRist
- 55 posts since 26 Jan, 2020
Ok. Tried it and Genesis is now working properly. Thanks.
But problem is that everytime I load the plugin it gives an error saying the DAW is not running with administrator privillages. (Although the plugin works properly, but don't know if it gives any error in future)
-
- KVRist
- 55 posts since 26 Jan, 2020
Also is there any way to remove the box at the bottom where jBridge version and Settings button etc. are shown? Not a big problem but I want to see clean Genesis as it is and to feel at least that I'm running 64-bit Genesis Pro.