XSRDO Analogy Official Release
-
- KVRer
- 2 posts since 27 Mar, 2006
Hey
Thanks for the update, and thanks for your continued great work.
I know you tested in Orion, and I am confirming that the GUI is working in Orion 64 bit (on Win 10)
Unfortunately, the GUI was not working correctly in Cubase (v10, Win 10). The VST comes up/opens with the initial patch/gui config, though it stays like that, and does not change/update when selecting a new preset, or changing values.
It is possible to change values (eg clock rate, or pitch) though the GUI does not reflect the changes.
Cheers.
Thanks for the update, and thanks for your continued great work.
I know you tested in Orion, and I am confirming that the GUI is working in Orion 64 bit (on Win 10)
Unfortunately, the GUI was not working correctly in Cubase (v10, Win 10). The VST comes up/opens with the initial patch/gui config, though it stays like that, and does not change/update when selecting a new preset, or changing values.
It is possible to change values (eg clock rate, or pitch) though the GUI does not reflect the changes.
Cheers.
-
- KVRist
- 128 posts since 7 Mar, 2004 from France
[/quote]
The downloaded rar file is corrupt.
Kirsty
[/quote]
Not for me ( tested ) it's stupid because I updated it ( 55 presets ) : https://drive.google.com/open?id=13-i7y ... XYUziRKbf-
Note 1: When I load song in "MuLab" , Analogy is mute . Then I open it and it sounds but with preset # 1 ( not mine ! ) .
Note 2: Sometimes , some modules are disable , although they're not used in the preset
Nevertheless , it seems stable, no crash , cpu load is higher than 32bit version.
I hope my notes will help U to improve Analogy .
The downloaded rar file is corrupt.
Kirsty
[/quote]
Not for me ( tested ) it's stupid because I updated it ( 55 presets ) : https://drive.google.com/open?id=13-i7y ... XYUziRKbf-
Note 1: When I load song in "MuLab" , Analogy is mute . Then I open it and it sounds but with preset # 1 ( not mine ! ) .
Note 2: Sometimes , some modules are disable , although they're not used in the preset
Nevertheless , it seems stable, no crash , cpu load is higher than 32bit version.
I hope my notes will help U to improve Analogy .
-
- KVRist
- Topic Starter
- 487 posts since 21 Nov, 2012 from Sitting in front of my PC
If it's responding to the mouse it sounds like the issue is in my WM_PAINT handler. I'll look into it.ultrakiller wrote: ↑Sun Mar 08, 2020 11:34 pm ...Unfortunately, the GUI was not working correctly in Cubase (v10, Win 10). The VST comes up/opens with the initial patch/gui config, though it stays like that, and does not change/update when selecting a new preset, or changing values.
It is possible to change values (eg clock rate, or pitch) though the GUI does not reflect the changes.
Cheers.
Unfortunately, I won't be installing Cubase as its system requirements are way too much for my laptop.
Thanks for the feedback every little helps
I was finally able to extract your presets with 7zip on windows but it still wont work in Ubuntu. Never mind, problem solvedjeff51 wrote: ↑Mon Mar 09, 2020 7:47 am
The downloaded rar file is corrupt.
Not for me ( tested ) it's stupid because I updated it ( 55 presets ) : https://drive.google.com/open?id=13-i7y ... XYUziRKbf-
Note 1+2 is fixed.jeff51 wrote: ↑Mon Mar 09, 2020 7:47 am Note 1: When I load song in "MuLab" , Analogy is mute . Then I open it and it sounds but with preset # 1 ( not mine ! ) .
Note 2: Sometimes , some modules are disable , although they're not used in the preset
Nevertheless , it seems stable, no crash , cpu load is higher than 32bit version.
I hope my notes will help U to improve Analogy .
CPU is still not fully optimised for 64Bit but will be reduced as I continue development.
Many thanks to everyone for your feedback. It all helps me improve Analogy.
Kirsty
-
- Banned
- 4558 posts since 21 Mar, 2020
I joined KVR mainly so that I could say a big thank you for this amazing synth. I had been using the 32 bit for a while and now have the 64 bit.
It works in Cakewalk by Bandlab but the GUI doesn't change with the presets unless you deliberately move it around a bit. The controls don't work properly either for the same reason. The presets are pretty awesome as is the overall sound.
I don't have a good income so I rely very much on quality freeware but if I am ever able to afford more, one of the first things I want to do is donate something to this project if possible. Thank you once again Kirsty.
It works in Cakewalk by Bandlab but the GUI doesn't change with the presets unless you deliberately move it around a bit. The controls don't work properly either for the same reason. The presets are pretty awesome as is the overall sound.
I don't have a good income so I rely very much on quality freeware but if I am ever able to afford more, one of the first things I want to do is donate something to this project if possible. Thank you once again Kirsty.
-
- KVRist
- Topic Starter
- 487 posts since 21 Nov, 2012 from Sitting in front of my PC
Updated to v0.976
New features include...
- Possible fix for GUI not updating on some host/daws
- Added Monophonic Phase Modulation oscillator
- Added Polyphonic Phase Modulation synth
- Added option to remember last project settings on load
- Added per patch CPU saver button to SYSTEM_MODULE with 5 second time out
- Added rename preset option
- Updated options menu
I would particularly like to know if the GUI now updates correctly in Cubase 10 and Cakewalk on Window 10.
To recall previous project settings turn on load last patch and load last bank in options menu.
Many thanks to everyone for all your help and support.
Free download as usual from my blog.
Kirsty
New features include...
- Possible fix for GUI not updating on some host/daws
- Added Monophonic Phase Modulation oscillator
- Added Polyphonic Phase Modulation synth
- Added option to remember last project settings on load
- Added per patch CPU saver button to SYSTEM_MODULE with 5 second time out
- Added rename preset option
- Updated options menu
I would particularly like to know if the GUI now updates correctly in Cubase 10 and Cakewalk on Window 10.
To recall previous project settings turn on load last patch and load last bank in options menu.
Many thanks to everyone for all your help and support.
Free download as usual from my blog.
Kirsty
-
- KVRist
- Topic Starter
- 487 posts since 21 Nov, 2012 from Sitting in front of my PC
Your welcomeErisian wrote: ↑Sat Mar 21, 2020 11:39 am I joined KVR mainly so that I could say a big thank you for this amazing synth. I had been using the 32 bit for a while and now have the 64 bit.
It works in Cakewalk by Bandlab but the GUI doesn't change with the presets unless you deliberately move it around a bit. The controls don't work properly either for the same reason. The presets are pretty awesome as is the overall sound.
I don't have a good income so I rely very much on quality freeware but if I am ever able to afford more, one of the first things I want to do is donate something to this project if possible. Thank you once again Kirsty.
Kirsty
-
- Banned
- 4558 posts since 21 Mar, 2020
Working beautifully in Cakewalk on Windows 7. Thank you very much Kirsty.kirsty roland wrote: ↑Sun Mar 22, 2020 10:54 am Updated to v0.976
I would particularly like to know if the GUI now updates correctly in Cubase 10 and Cakewalk on Window 10.
-
- KVRist
- Topic Starter
- 487 posts since 21 Nov, 2012 from Sitting in front of my PC
That's great newsErisian wrote: ↑Sun Mar 22, 2020 3:56 pmWorking beautifully in Cakewalk on Windows 7. Thank you very much Kirsty.kirsty roland wrote: ↑Sun Mar 22, 2020 10:54 am Updated to v0.976
I would particularly like to know if the GUI now updates correctly in Cubase 10 and Cakewalk on Window 10.
How about some patches. Here's some weird mechanical wave sequencing patches I did last night. Kirsty
You do not have the required permissions to view the files attached to this post.
-
- Banned
- 4558 posts since 21 Mar, 2020
That's something I have been thinking of but I first need to work out how to connect modules. I am studying existing patches to get some idea but it's a slow process. The main signal flow is the easy bit so I can get a basic sound that I like but I'm working on envelopes and modulation at the moment. I have a loose idea from working with Kamioooka but it is different from synth to synth.
-
- Banned
- 4558 posts since 21 Mar, 2020
Got it figured at last. Created my first patch - a kind of phased string sound. When I have a small collection, I'll post them here.Erisian wrote: ↑Tue Mar 24, 2020 3:21 pmThat's something I have been thinking of but I first need to work out how to connect modules. I am studying existing patches to get some idea but it's a slow process. The main signal flow is the easy bit so I can get a basic sound that I like but I'm working on envelopes and modulation at the moment. I have a loose idea from working with Kamioooka but it is different from synth to synth.
-
- KVRist
- 128 posts since 7 Mar, 2004 from France
Hi kirsty . I will test new version v0.976 with S.one . I hope my presets will be compatible ( I added them to the download section of KVR ) . Good job
-
- Banned
- 4558 posts since 21 Mar, 2020
I know you didn't address this to me but they work fine on the update.
kirsty (or anybody)
I'm having a problem with the amp envelope - it's a problem with my knowledge, not with the synth. I have created a phased string sound with a nice long attack and release but although the attack is long on the first note played, subsequent notes attack too quickly and give almost a key sound. Any advice?
-
- KVRist
- Topic Starter
- 487 posts since 21 Nov, 2012 from Sitting in front of my PC
Hi Erisian
If you are using an ADSR Module M070 as an amp envelope it's behaviour changes depending on the
System Module M003 MIDI Retrigger switch. When you press a new key, retriggering can be set to either
restart the envelope at the attack stage or stay at the current sustain level.
Hope that helps.
Kirsty
If you are using an ADSR Module M070 as an amp envelope it's behaviour changes depending on the
System Module M003 MIDI Retrigger switch. When you press a new key, retriggering can be set to either
restart the envelope at the attack stage or stay at the current sustain level.
Hope that helps.
Kirsty
-
- KVRist
- Topic Starter
- 487 posts since 21 Nov, 2012 from Sitting in front of my PC
I'll check them out
Kirsty