KVR Audio

Examigan · Post by **Examigan** » Fri Apr 17, 2020 11:26 pm

JamminFool wrote: Fri Apr 17, 2020 10:30 pm In Triton on Win10, Arpeggiator B (in Combi mode) has a problem with the dropdowns for Octave and Resolution. The lists are displayed in the wrong font size and do not respond to selection. This happens in both Waveform 11 and Live 10 when hi-res is used (which is necessary for me as these GUI's are blurry otherwise).

I just tried that in Cakewalk by Bandlab w/Windows 10 (and in the standalone version) set to the full/high resolution setting of Triton, and the menus for both of those worked fine for me in Combi mode for Arp A and B.

DJMaytag · Post by **DJMaytag** » Fri Apr 17, 2020 11:29 pm

TL;DR

I used Korg Software Pass or whatever it was to update all the individual plugins to the latest versions, so I'm good there, but I can't for the life of me figure out what the scoop is with upgrading the whole bundle to Collection 2. I migrated to Korg Collection and then bought Odyssey as an individual plugin. I swear I'm reading it as if I should be able to get the full Korg Collection 2, though I don't really care if I get Triton or not.

muki · Post by **muki** » Sat Apr 18, 2020 2:10 am

muki wrote: Fri Apr 17, 2020 7:22 pm no problems in logicX though as far as i can see

wrong

now monopoly is crashing logicX upon hitting browserbutton...
sending crashlog

Forgotten · Post by **Forgotten** » Sat Apr 18, 2020 2:24 am

mholloway · Post by **mholloway** » Sat Apr 18, 2020 2:42 am

DJMaytag wrote: Fri Apr 17, 2020 11:29 pm TL;DR

I used Korg Software Pass or whatever it was to update all the individual plugins to the latest versions, so I'm good there, but I can't for the life of me figure out what the scoop is with upgrading the whole bundle to Collection 2. I migrated to Korg Collection and then bought Odyssey as an individual plugin. I swear I'm reading it as if I should be able to get the full Korg Collection 2, though I don't really care if I get Triton or not.

Downloading the new versions of the plugins IS getting Collection 2. You don't get the Triton for free, it costs like 249.

JamminFool · Post by **JamminFool** » Sat Apr 18, 2020 2:55 am

Examigan wrote: Fri Apr 17, 2020 11:26 pm
JamminFool wrote: Fri Apr 17, 2020 10:30 pm In Triton on Win10, Arpeggiator B (in Combi mode) has a problem with the dropdowns for Octave and Resolution. The lists are displayed in the wrong font size and do not respond to selection. This happens in both Waveform 11 and Live 10 when hi-res is used (which is necessary for me as these GUI's are blurry otherwise).
I just tried that in Cakewalk by Bandlab w/Windows 10 (and in the standalone version) set to the full/high resolution setting of Triton, and the menus for both of those worked fine for me in Combi mode for Arp A and B.

Yes, I tried it in Cakewalk also, and it worked fine, as you report. It also works ok in Ableton if you take Ableton out of hi-res mode. But there is a problem with hi-res.

JamminFool · Post by **JamminFool** » Sat Apr 18, 2020 2:58 am

Examigan wrote: Fri Apr 17, 2020 11:26 pm
JamminFool wrote: Fri Apr 17, 2020 10:30 pm In Triton on Win10, Arpeggiator B (in Combi mode) has a problem with the dropdowns for Octave and Resolution. The lists are displayed in the wrong font size and do not respond to selection. This happens in both Waveform 11 and Live 10 when hi-res is used (which is necessary for me as these GUI's are blurry otherwise).
I just tried that in Cakewalk by Bandlab w/Windows 10 (and in the standalone version) set to the full/high resolution setting of Triton, and the menus for both of those worked fine for me in Combi mode for Arp A and B.

Yup, I tested it in Cakewalk also and you are correct. It messes up when the DAW is set up to use hi-res mode. I don't think Cakewalk has that.

JamminFool · Post by **JamminFool** » Sat Apr 18, 2020 2:59 am

double post.

Muziksculp · Post by **Muziksculp** » Sat Apr 18, 2020 3:51 am

Do I need to un-install the Legacy Korg Collection Instruments before installing the new Korg Collection 2 ?

Jace-BeOS · Post by **Jace-BeOS** » Sat Apr 18, 2020 4:16 am

Muziksculp wrote: Sat Apr 18, 2020 3:51 am Do I need to un-install the Legacy Korg Collection Instruments before installing the new Korg Collection 2 ?

I didn’t. Haven’t seen a problem as a result that isn’t just bugs in the new GUI.

mholloway · Post by **mholloway** » Sat Apr 18, 2020 4:44 am

So someone in the ReasonTalk forum reports the following -- he had the same crashes on a Mac as reported here (MonoPoly and Wavestation, when clicking 'program manager' and 'search' respectively) -- so he updated to Catalina, and reports that the crashes stopped after that.

According to Korg's spec it's *supposed* to work as far back as low Sierra, but I'm guessing they didn't really test the old OS's much (or at all). Apparently Catalina will resolve it (and probably break a hundred other things, meanwhile, ugh).

planetearth · Post by **planetearth** » Sat Apr 18, 2020 5:20 am

Muziksculp wrote: Sat Apr 18, 2020 3:51 am Do I need to un-install the Legacy Korg Collection Instruments before installing the new Korg Collection 2 ?

It isn't necessary, but keep in mind that the new versions will overwrite your old plug-in .DLL files. If you want to keep them temporarily (to troubleshoot problems, for example), you might want to re-name the original .DLLs in your VST plug-ins folder. That way, if there's a problem, you can un-install the new version (if necessary), and/or just re-name the .DLLs to switch back to the old versions temporarily.

Steve

BBFG# · Post by **BBFG#** » Sat Apr 18, 2020 5:26 am

planetearth wrote: Sat Apr 18, 2020 5:20 am
Muziksculp wrote: Sat Apr 18, 2020 3:51 am Do I need to un-install the Legacy Korg Collection Instruments before installing the new Korg Collection 2 ?
It isn't necessary, but keep in mind that the new versions will overwrite your old plug-in .DLL files. If you want to keep them temporarily (to troubleshoot problems, for example), you might want to re-name the original .DLLs in your VST plug-ins folder. That way, if there's a problem, you can un-install the new version (if necessary), and/or just re-name the .DLLs to switch back to the old versions temporarily.

Steve

Or just create a separate folder to install them to and then add the path to your DAW(s). Then you should have both.

revvy · Post by **revvy** » Sat Apr 18, 2020 6:39 am

mholloway wrote: Sat Apr 18, 2020 4:44 am So someone in the ReasonTalk forum reports the following -- he had the same crashes on a Mac as reported here (MonoPoly and Wavestation, when clicking 'program manager' and 'search' respectively) -- so he updated to Catalina, and reports that the crashes stopped after that.

According to Korg's spec it's *supposed* to work as far back as low Sierra, but I'm guessing they didn't really test the old OS's much (or at all). Apparently Catalina will resolve it (and probably break a hundred other things, meanwhile, ugh).

Can't you just go up to Mojave?

Muziksculp · Post by **Muziksculp** » Sat Apr 18, 2020 6:54 am

planetearth wrote: Sat Apr 18, 2020 5:20 am
Muziksculp wrote: Sat Apr 18, 2020 3:51 am Do I need to un-install the Legacy Korg Collection Instruments before installing the new Korg Collection 2 ?
It isn't necessary, but keep in mind that the new versions will overwrite your old plug-in .DLL files. If you want to keep them temporarily (to troubleshoot problems, for example), you might want to re-name the original .DLLs in your VST plug-ins folder. That way, if there's a problem, you can un-install the new version (if necessary), and/or just re-name the .DLLs to switch back to the old versions temporarily.

Steve

Thanks for the feedback.

Korg Collection (V2.0 released, GUI update!)