Sorry! I meant sensitivity of the controls. When I last demoed it, you had it calibrated so each frequency band was full-range, which made adjusting in small increments extremely twitchy unless using a modifier. It was the main reason I never bothered with it, again. Has that been changed, or at least become a switchable option/choice?TB-ProAudio wrote: ↑Thu Oct 24, 2019 5:18 amNo changes since CS3301el-bo (formerly ebow) wrote: ↑Wed Oct 23, 2019 5:18 pmHas the eq sensitivity been changes, then? I've not demo'd it for a whileTB-ProAudio wrote: ↑Wed Oct 23, 2019 4:29 pmYes, the EQ section is the same as in CS3301.s28 wrote: ↑Wed Oct 23, 2019 3:46 pm What's the eq component tolerances - Is it modelling a certain piece of hardware? Some of these updates don't really mean anything without a bit of clarification, not a complaint, just perspective. I am considering picking this thing up, seems to cover everything i'm after strip wise.
Is the eq exactly the same as the original strip?
No specific HW modelling.
In CS5501 you can enable now " eq component tolerances", what is usually known from HW. So if you set f0 to 1000Hz it could be e.g. finally 986Hz or 1008 Hz.
TBProAudio: CS-5501 - Channel Strip Plugin for Windows and Mac OS X
-
el-bo (formerly ebow) el-bo (formerly ebow) https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=208007
- KVRAF
- 16369 posts since 24 May, 2009 from A galaxy, far far away
-
- KVRAF
- 3527 posts since 1 Sep, 2016
-
el-bo (formerly ebow) el-bo (formerly ebow) https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=208007
- KVRAF
- 16369 posts since 24 May, 2009 from A galaxy, far far away
Thanks! However, I’ll take the blame again for not being clear. The word I should’ve used was ‘scaling’. Specifically, whether trying to deal with bass frequencies, for example, means having to make adjustments within a tiny percentage range of the full dial.
Cheers
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Update 1.3.3:
- FIX: vst3 routing menu issue
- FIX: restrict EQ tolerance change to touched parameter
- FIX: tooltips texts corrected
- FIX: vst3 routing menu issue
- FIX: restrict EQ tolerance change to touched parameter
- FIX: tooltips texts corrected
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Update 1.4.0:
- NEW: 4x oversampling added
- UPDATE: AB_LM is now placed in between IN and OUT fader. This ensures a more natural AB_LM experience while working with effect modules
- FIX: load default values from disk (AAX)
- FIX: store current preset name with project (VST3/AAX)
- NEW: 4x oversampling added
- UPDATE: AB_LM is now placed in between IN and OUT fader. This ensures a more natural AB_LM experience while working with effect modules
- FIX: load default values from disk (AAX)
- FIX: store current preset name with project (VST3/AAX)
-
- KVRian
- 753 posts since 2 Aug, 2013
Can't wait for DSEQ.
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Just released
- Banned
- 11467 posts since 4 Jan, 2017 from Warsaw, Poland
Why initialising the patch to default state also resets the GUI size to 100%? This doesn't make any sense. For vast majority of plugins those are separate settings.TB-ProAudio wrote: ↑Sat Apr 18, 2020 7:40 am Update 1.4.0:
- NEW: 4x oversampling added
- UPDATE: AB_LM is now placed in between IN and OUT fader. This ensures a more natural AB_LM experience while working with effect modules
- FIX: load default values from disk (AAX)
- FIX: store current preset name with project (VST3/AAX)
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Let us see what we can do hereantic604 wrote: ↑Sun Apr 19, 2020 11:19 amWhy initialising the patch to default state also resets the GUI size to 100%? This doesn't make any sense. For vast majority of plugins those are separate settings.TB-ProAudio wrote: ↑Sat Apr 18, 2020 7:40 am Update 1.4.0:
- NEW: 4x oversampling added
- UPDATE: AB_LM is now placed in between IN and OUT fader. This ensures a more natural AB_LM experience while working with effect modules
- FIX: load default values from disk (AAX)
- FIX: store current preset name with project (VST3/AAX)
- Banned
- 11467 posts since 4 Jan, 2017 from Warsaw, Poland
Thanks! I think most VSTs store user preferences (like GUI size) in some kind of config file or Windows' registry (I've no idea if OSX has something similar), so if I change default size of the plugin in Studio One, when I open it in Bitwig it will be that size.
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Update 1.4.11:
- UPDATE: Saturation Solo and Mid/Side enabled
- UPDATE: reduced flicker during GUI update
- UPDATE: button click speed improved
- NEW: saturation mode added: classic (from CS-3301)
- UPDATE: improved button click speed
- UPDATE: support for PreSonus::IGainReductionInfo
- FIX: VST3 Cubase reads correct bypass state
- FIX: session data reduced
- UPDATE: reworked user preset management
- FIX: VST3 crash Adobe Audition 2020
- UPDATE: improved GUI update on WIN/MAC
- UPDATE: small DSP code optimizations
- FIX: EQ tolerance
- FIX: improved Studio One compatibility
- FIX: improved Ableton compatibility
- FIX: improved DAW bypass handling
- UPDATE: Saturation Solo and Mid/Side enabled
- UPDATE: reduced flicker during GUI update
- UPDATE: button click speed improved
- NEW: saturation mode added: classic (from CS-3301)
- UPDATE: improved button click speed
- UPDATE: support for PreSonus::IGainReductionInfo
- FIX: VST3 Cubase reads correct bypass state
- FIX: session data reduced
- UPDATE: reworked user preset management
- FIX: VST3 crash Adobe Audition 2020
- UPDATE: improved GUI update on WIN/MAC
- UPDATE: small DSP code optimizations
- FIX: EQ tolerance
- FIX: improved Studio One compatibility
- FIX: improved Ableton compatibility
- FIX: improved DAW bypass handling
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Update 2.0.0:
- NEW: free GUI scale
- NEW: Hide knob overlay text
- UPDATE: Mac universal binaries
- UPDATE: up to 30% CPU reduction
- NEW: free GUI scale
- NEW: Hide knob overlay text
- UPDATE: Mac universal binaries
- UPDATE: up to 30% CPU reduction
- KVRian
- Topic Starter
- 711 posts since 16 May, 2014 from Germany
Update to 2.0.7:
- NEW: online version check
- UPDATE: OS aliasing reduced
- UPDATE: improved UTF8 support
- UPDATE: touch support
- FIX: Cubase, crash reg procedure
- FIX: small GUI fixes
- FIX: cubase, crash save as default
- FIX: value input activates controls
- FIX: missing GUI update of Sat and Deesser module during parameter change
- NEW: online version check
- UPDATE: OS aliasing reduced
- UPDATE: improved UTF8 support
- UPDATE: touch support
- FIX: Cubase, crash reg procedure
- FIX: small GUI fixes
- FIX: cubase, crash save as default
- FIX: value input activates controls
- FIX: missing GUI update of Sat and Deesser module during parameter change