Vengeance Producer Suite - AVENGER - 1.8.5 the main thread

[m-ac]

Another quick question - can someone explain the arp on/off lighting status? I'm assuming the ring around the button is linked to the fact it can be switched on and off in the macros, but it seems to function differently on different presets.

I've RTFM, but it doesn't seemed to be explained anywhere. Also, I can only find the the manual for version 1.4.2...is there an up to date version of the manual anywhere?


Screenshot 2020-06-14 at 13.47.55.png

Do you have an example? Impossible to tell what the issue is from the info you gave.

The issue with the extra light around the on/off button? I just wanted some info on how it functions. For example, heres a preset with the arp on by default when loaded, and then switched off via the macro.

Screenshot 2020-06-14 at 14.50.41.png

Screenshot 2020-06-14 at 14.50.53.png

Now here's another preset, again with the arp on by default, but the on/off state of the lights is different (look at the square ring).

Screenshot 2020-06-14 at 14.51.16.png

Screenshot 2020-06-14 at 14.51.27.png

[kenny saunders]

Another quick question - can someone explain the arp on/off lighting status? I'm assuming the ring around the button is linked to the fact it can be switched on and off in the macros, but it seems to function differently on different presets.

I've RTFM, but it doesn't seemed to be explained anywhere. Also, I can only find the the manual for version 1.4.2...is there an up to date version of the manual anywhere?


Screenshot 2020-06-14 at 13.47.55.png

Do you have an example? Impossible to tell what the issue is from the info you gave.

The issue with the extra light around the on/off button? I just wanted some info on how it functions. For example, heres a preset with the arp on by default when loaded, and then switched off via the macro.


Screenshot 2020-06-14 at 14.50.41.png


Screenshot 2020-06-14 at 14.50.53.png



Now here's another preset, again with the arp on by default, but the on/off state of the lights is different (look at the square ring).


Screenshot 2020-06-14 at 14.51.16.png


Screenshot 2020-06-14 at 14.51.27.png

The arp button with the line around it is because it has a macro button tied to it and it is switched on.

if you switch the macro off the button is normal, if the macro is on then it has a line around it so you can differentiate between 2 off/on buttons.

[m-ac]

Another quick question - can someone explain the arp on/off lighting status? I'm assuming the ring around the button is linked to the fact it can be switched on and off in the macros, but it seems to function differently on different presets.

I've RTFM, but it doesn't seemed to be explained anywhere. Also, I can only find the the manual for version 1.4.2...is there an up to date version of the manual anywhere?


Screenshot 2020-06-14 at 13.47.55.png

Do you have an example? Impossible to tell what the issue is from the info you gave.

The issue with the extra light around the on/off button? I just wanted some info on how it functions. For example, heres a preset with the arp on by default when loaded, and then switched off via the macro.


Screenshot 2020-06-14 at 14.50.41.png


Screenshot 2020-06-14 at 14.50.53.png



Now here's another preset, again with the arp on by default, but the on/off state of the lights is different (look at the square ring).


Screenshot 2020-06-14 at 14.51.16.png


Screenshot 2020-06-14 at 14.51.27.png

The arp button with the line around it is because it has a macro button tied to it and it is switched on.

if you switch the macro off the button is normal, if the macro is on then it has a line around it so you can differentiate between 2 off/on buttons.

That's what I assumed too, but in my examples above the lights work in completely ways.

First example: Macro not active, arp on - solid square light on, ring off. Macro active, arp off - solid square light off, ring on.

Second example: Macro not active, arp on - solid square light on, ring on. Macro active, arp off - solid square light off, ring off.

Maybe it's explained in the manual. So, is there an up to date manual available?

[rlared]

Another quick question - can someone explain the arp on/off lighting status? I'm assuming the ring around the button is linked to the fact it can be switched on and off in the macros, but it seems to function differently on different presets.

I've RTFM, but it doesn't seemed to be explained anywhere. Also, I can only find the the manual for version 1.4.2...is there an up to date version of the manual anywhere?


Screenshot 2020-06-14 at 13.47.55.png

Do you have an example? Impossible to tell what the issue is from the info you gave.

The issue with the extra light around the on/off button? I just wanted some info on how it functions. For example, heres a preset with the arp on by default when loaded, and then switched off via the macro.


Screenshot 2020-06-14 at 14.50.41.png


Screenshot 2020-06-14 at 14.50.53.png



Now here's another preset, again with the arp on by default, but the on/off state of the lights is different (look at the square ring).


Screenshot 2020-06-14 at 14.51.16.png


Screenshot 2020-06-14 at 14.51.27.png

I'm guessing the box appears when there is a control actively modifying it. In the first example the macro turns the arp OFF when active. The second example the macro turns the arp ON when active.

[msvs]

the box appears when modulation is active. When the button is modulated to another state, the square will appear. It does not matter if this is an on or an off modulation

regarding note reset: set the polyphony to 1/1 and back. This will kill all notes.

[m-ac]

the box appears when modulation is active. When the button is modulated to another state, the square will appear. It does not matter if this is an on or an off modulation

regarding note reset: set the polyphony to 1/1 and back. This will kill all notes.

Ok thanks. Regarding the hanging notes, I tested further and I'm 100% sure it's connected to the humanize function in the arp as I can replicate the issue every time. I INIT the synth, add an arp, add some humanize and bam, hanging notes once it starts playing through.

I'll send an email to Rene but figured it might be helpful to post here incase anyone else is having similar issues.

[msvs]

pls check in advance that you are usind 1.5.9 actually

[m-ac]

pls check in advance that you are usind 1.5.9 actually

Yep, still does it in 1.5.9.

[m-ac]

Video demonstrating the issue. Sorry about the sound - had the neighbourhood chavs flying past in their shitboxes and I had to use my built in mic.

https://imgur.com/thBTbEL

[_TIP_]

Video demonstrating the issue. Sorry about the sound - had the neighbourhood chavs flying past in their shitboxes and I had to use my built in mic.

https://imgur.com/thBTbEL

Getting hanging notes as well here. Win10, Avenger v1.5.9, Reaper v6.12.

[msvs]

[hivkorn]

ok, guys, i am here to said that i was wrong.i was forced to format my hd and i lose my v1.4...so i had to go to 1.5 with codemeter, i was AFFRAID to make something wrong and stuck my licence....but i follow every step given on the avenger download site and everything worked very well ! ok Mr MSVS you ve done a fuc*ing great job ! but please reduce the GUI for the first launch, i wash stuck during 1 hour and i have resolved the problem in loading it in obscurium and adjust the GUI.

edit : can you please tell me why the whole fx serie don t work under reaper ?

[Tendou]

okay I found another really annoying issue... my ableton just crashed and used the recreation feature of ableton and I noticed no avenger channel was playing anymore and when I click the plugin it says: "Error, cannot create plugin instance. Please reinstall".
When I do reinstall it which is annoying by its own, the patch which I programmed is not existent anymore and I really dont have any clue anymore how I did it. Is there a workaround Manuel?

[msvs]

but i follow every step given on the avenger download site and everything worked very well

good to hear, finally someone who first reads, then acts

but please reduce the GUI for the first launch, i wash stuck during 1 hour and i have resolved the problem in loading it in obscurium and adjust the GUI.

I thougt it starts at 80%? Isnt this the case? (However in the Win registry it can be adjusted, too afaik)

edit : can you please tell me why the whole fx serie don t work under reaper ?

first time I hear this. You should write the support/Rene whats wrong so he can fix

Is there a workaround Manuel?

best thing is to contact the support. I am no technician and cant give support here


regarding hanging notes:
I can report that Rene was able to reproduce (the Arp humanize did it) and can fix it in the next minor update

[hivkorn]

problem for my FX fixed by the support they told me to use a specific version of the elicencer, now i have all my vengeance fx working