New Dreadbox 'Typhon' analog + Sinevibes DSP FX + sequencer for 350E
-
- KVRAF
- Topic Starter
- 11276 posts since 2 Dec, 2004 from North Wales
Looks really nice!
https://www.dreadbox-fx.com/typhon/
> Analog Circuit including 2 Classic Dreadbox Oscillators, a 4-pole Low Pass Filter, and Multiple Analog VCAs
> 2 Envelope Generators for the Filter and the Amp
> 3 Modulators with 4 Different Modes
(LFO, EG, Random, Parameter Step Sequencer)
and Multiple Active Targets
> All analog parts feature a dedicated direct control on the left front panel.
> With the sliders, buttons, and encoder on the right side of the front panel you can control the Amp and the Filter envelopes, the sequencer, the modulators, and the stereo effects, in order to create and save your desired sounds
> 12 DSP stereo effects (32bit @96kHz) developed by Sinevibes, including Distortion, Bit crusher, Chorus, Ensemble,Flanger, Delay and Reverb
> 32 Note Sequencer that can be used to sequence notes in the traditional way or used as a modulation source
> 254 preset memory, with import/export support
> External audio input that can turn this box into the ultimate effects unit
> Portable, Powered via USB with full MIDI and CC Implementation
https://www.dreadbox-fx.com/typhon/
> Analog Circuit including 2 Classic Dreadbox Oscillators, a 4-pole Low Pass Filter, and Multiple Analog VCAs
> 2 Envelope Generators for the Filter and the Amp
> 3 Modulators with 4 Different Modes
(LFO, EG, Random, Parameter Step Sequencer)
and Multiple Active Targets
> All analog parts feature a dedicated direct control on the left front panel.
> With the sliders, buttons, and encoder on the right side of the front panel you can control the Amp and the Filter envelopes, the sequencer, the modulators, and the stereo effects, in order to create and save your desired sounds
> 12 DSP stereo effects (32bit @96kHz) developed by Sinevibes, including Distortion, Bit crusher, Chorus, Ensemble,Flanger, Delay and Reverb
> 32 Note Sequencer that can be used to sequence notes in the traditional way or used as a modulation source
> 254 preset memory, with import/export support
> External audio input that can turn this box into the ultimate effects unit
> Portable, Powered via USB with full MIDI and CC Implementation
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
vitocorleone123 vitocorleone123 https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=333504
- KVRAF
- 1940 posts since 30 Jun, 2014 from Pacific NW
Sounds good, too, in the videos.
This would’ve been a great Roland Boutique to go alongside the SE-02, but that line seems.... stagnant.
This would’ve been a great Roland Boutique to go alongside the SE-02, but that line seems.... stagnant.
-
- KVRAF
- Topic Starter
- 11276 posts since 2 Dec, 2004 from North Wales
Yes, I think it sounds great....and it has audio so you can use it as an fx box...(not sure if it goes through the filter)
Also interested to see more on the step sequencer as it has probability etc.
Also interested to see more on the step sequencer as it has probability etc.
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- addled muppet weed
- 106269 posts since 26 Jan, 2003 from through the looking glass
-
- KVRAF
- Topic Starter
- 11276 posts since 2 Dec, 2004 from North Wales
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRist
- 166 posts since 1 Sep, 2004
Some real solid youtube videos showing what the typhon can do, from these past couple weeks.
Pre-ordered mine, even though i wasn't in the market for a new hardware synth.
It's just got exactly the kind of combination of features to pique my interest.
Funky sequencer, solid FX, lots of memories, and a great yet versatile core sound.
We just gotta lobby Dreadbox to make an option for those mod sequencers to trigger from midi start, and not (only) retrigger with each note trigger. I want that polyrhythmic modulation, even on busy note sequences, damnit!
Pre-ordered mine, even though i wasn't in the market for a new hardware synth.
It's just got exactly the kind of combination of features to pique my interest.
Funky sequencer, solid FX, lots of memories, and a great yet versatile core sound.
We just gotta lobby Dreadbox to make an option for those mod sequencers to trigger from midi start, and not (only) retrigger with each note trigger. I want that polyrhythmic modulation, even on busy note sequences, damnit!
-
- KVRist
- 166 posts since 1 Sep, 2004
some forthcoming feature updates from the FB Group , direct from Yiannis
https://www.facebook.com/groups/3618924671457910/
"Around the end of september- early October, with the help of Sinevibes and our exceptional programming team we will add the following updates:
1. Midi over usb
2. More effects and updates on the current ones
3. Sequencer updates to 64 steps
4. New modulator mode FM.(hopefully)
5. Full cc implementation
6. Lfo bpm sync
7. Midi clock send/receive
.....
also,
digital high pass filter (looking into)
a target group of mod level will be added.
Midi program change too.
audio via usb will probably be achieved, but we need time. Hard sync is not in the plans for now."
https://www.facebook.com/groups/3618924671457910/
"Around the end of september- early October, with the help of Sinevibes and our exceptional programming team we will add the following updates:
1. Midi over usb
2. More effects and updates on the current ones
3. Sequencer updates to 64 steps
4. New modulator mode FM.(hopefully)
5. Full cc implementation
6. Lfo bpm sync
7. Midi clock send/receive
.....
also,
digital high pass filter (looking into)
a target group of mod level will be added.
Midi program change too.
audio via usb will probably be achieved, but we need time. Hard sync is not in the plans for now."
- KVRAF
- 2288 posts since 21 Mar, 2012 from Nom..nom.. YOUR MOM
Sooo... October 2021 now? It's been over a year LOL!!!adamjay wrote: ↑Mon Jul 20, 2020 6:35 pm some forthcoming feature updates from the FB Group , direct from Yiannis
https://www.facebook.com/groups/3618924671457910/
"Around the end of september- early October, with the help of Sinevibes and our exceptional programming team we will add the following updates:
1. Midi over usb
2. More effects and updates on the current ones
3. Sequencer updates to 64 steps
4. New modulator mode FM.(hopefully)
5. Full cc implementation
6. Lfo bpm sync
7. Midi clock send/receive
.....
also,
digital high pass filter (looking into)
a target group of mod level will be added.
Midi program change too.
audio via usb will probably be achieved, but we need time. Hard sync is not in the plans for now."
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770 @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro| Akai MPC Live II & Akai Force | Roland System 8 | Roland TR-8 with 7x7 Expansion | Roland TB-3 | Roland MX-1 | Dreadbox Typhon | Korg Minilogue XD
-
- KVRAF
- Topic Starter
- 11276 posts since 2 Dec, 2004 from North Wales
They did manage a new paint jobEnochLight wrote: ↑Sun Jun 20, 2021 1:33 amSooo... October 2021 now? It's been over a year LOL!!!adamjay wrote: ↑Mon Jul 20, 2020 6:35 pm some forthcoming feature updates from the FB Group , direct from Yiannis
https://www.facebook.com/groups/3618924671457910/
"Around the end of september- early October, with the help of Sinevibes and our exceptional programming team we will add the following updates:
1. Midi over usb
2. More effects and updates on the current ones
3. Sequencer updates to 64 steps
4. New modulator mode FM.(hopefully)
5. Full cc implementation
6. Lfo bpm sync
7. Midi clock send/receive
.....
also,
digital high pass filter (looking into)
a target group of mod level will be added.
Midi program change too.
audio via usb will probably be achieved, but we need time. Hard sync is not in the plans for now."
https://www.dreadbox-fx.com/typhon-ltd-edition/
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
- KVRAF
- 2288 posts since 21 Mar, 2012 from Nom..nom.. YOUR MOM
Covid? Lmao - nope. The work that Sinevibes does is remote anyway.
Exactly. Just curious why these alleged updates teased a year ago are still nowhere to be found.SLiC wrote: ↑Sun Jun 20, 2021 9:24 am They did manage a new paint job
https://www.dreadbox-fx.com/typhon-ltd-edition/
Win 10 | Ableton Live 11 Suite | Reason 12 | i7 3770 @ 3.5 Ghz | 16 GB RAM | RME Babyface Pro| Akai MPC Live II & Akai Force | Roland System 8 | Roland TR-8 with 7x7 Expansion | Roland TB-3 | Roland MX-1 | Dreadbox Typhon | Korg Minilogue XD
-
thecontrolcentre thecontrolcentre https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=76240
- KVRAF
- 35294 posts since 27 Jul, 2005 from the wilds of wanny
I prefer the new paintjob (doesn't seem to be available yet). Will wait for the updates before buying tho' ...
-
- KVRist
- 166 posts since 1 Sep, 2004
I was mocking you because a majority of the update features quoted have already happened over the last couple firmware updates that were several months ago.EnochLight wrote: ↑Sun Jun 20, 2021 2:02 pmCovid? Lmao - nope. The work that Sinevibes does is remote anyway.
Exactly. Just curious why these alleged updates teased a year ago are still nowhere to be found.SLiC wrote: ↑Sun Jun 20, 2021 9:24 am They did manage a new paint job
https://www.dreadbox-fx.com/typhon-ltd-edition/