MeldaProduction

Dasheesh · Post by **Dasheesh** » Mon Jan 04, 2021 7:32 pm

how are you guys turning on and off the crossover band modulation, and why can"t i find it? this would seem to be something that should be obvious. It's not the crossover type doing it, and it's not assigned as a modulator. It's also not a simple on/off switch. i give. all i want to do is turn on and off the crossover modulation.

Tyrs · Post by **Tyrs** » Mon Jan 04, 2021 7:41 pm

If you want to the crossover line to be moved back and forth within the frequency spectrum, then you need to assign it to a modulator. Choose one of the modulators, click learn and move the crossover line back and forth. Is this what you are searching for?

Dasheesh · Post by **Dasheesh** » Mon Jan 04, 2021 10:08 pm

Thanks, I'm trying to get it to STOP going back and forth. I tried clearing all the modulators and the crossovers still swing back and forth as if by an envelope follower. It does seem to be a type of crossover, and it doesn't seem to have an easy way to de-modulate them. which leaves me scratching my head.

Tyrs · Post by **Tyrs** » Mon Jan 04, 2021 10:55 pm

LOL, thought you want to enable it. Please share the preset.

Dasheesh · Post by **Dasheesh** » Mon Jan 04, 2021 10:58 pm

There are many presets, but I'm playing with the MBgranular one in particular. I suppose it could be a side chaining event by some smart ass preset maker.... which means i would have to track things down, and tbh, most of the presets do this somehow, so it must be something I've overlooked all day. I have watched several videos, that don't mention the crossover automation. I have deleted all the modulators.

Dasheesh · Post by **Dasheesh** » Tue Jan 05, 2021 12:14 am

this one "demarcate infiltrator". i've deleted every modulator. where is this envelope follower coming from?

ericzang · Post by **ericzang** » Tue Jan 05, 2021 6:41 am

hmm, something unusual about your setup somehow? It turns off simply for me by turning off the modulator.

Dasheesh · Post by **Dasheesh** » Tue Jan 05, 2021 9:36 am

until you play something through it. then it follows the signal still. at least, it does on my perfectly normal pc set up.

i am deleting/clearing all modulations. the crossovers will hold still until i play a note through it, and then the crossovers move back and forth with the signal, like an envelope follower. i figured clearing modulations would take care of it.

ericzang · Post by **ericzang** » Tue Jan 05, 2021 11:39 am

Ah ok. I retested with audio going through it, and also playing a synth through. Still it stops modulating when I disable Mod 1 as in my screen capture above. You wrote you are playing a note? Is that midi? Anything assigned in the MIDI settings pages?

Dasheesh · Post by **Dasheesh** » Tue Jan 05, 2021 11:57 am

first, the bypass switches on the modulators are no longer available in the newest version. so i have to delete them, but i am unsure about the midi mappings... i haven't mapped anything intentionally. i'll dig around a little.

Dasheesh · Post by **Dasheesh** » Tue Jan 05, 2021 12:09 pm

i don't see anything mapped in reaper, and i haven't mapped anything. i just loaded up lush 101 and put this thing behind it, and it's driving me batty at this point. where is this modulation coming from? if i load a default it doesn't do it. it's just with the presets.

ericzang · Post by **ericzang** » Tue Jan 05, 2021 12:20 pm

Dasheesh wrote: Tue Jan 05, 2021 11:57 am first, the bypass switches on the modulators are no longer available in the newest version. so i have to delete them

Sorry, I must not be understanding what's happening for you. Can you post a screen capture or a screenshot and do a copy/paste of the preset code?

I'm using version 14.15. I must not be understanding correctly because it's hard for me to imagine that the bypass switches could be removed, and also it is not possible to delete a modulator as far as I am interpreting things.

Dasheesh · Post by **Dasheesh** » Tue Jan 05, 2021 12:39 pm

i rarely use social and am not active on the internet. version 14.15 does not have bypass switches in the new gui. it gives you the option of a manager, but no bypass switches. if you right click it gives a prompt of delete the modulation or reset the modulation etc... no bypass switch, i can delete all the modulations on said preset and the cross overs will stop modulating as long as no signal passes through, but as soon as i send a signal through again, it modulates with the audio signal. pretty simple.

ericzang · Post by **ericzang** » Tue Jan 05, 2021 1:08 pm

What you describe sounds like a "Multiparameter" instead of a Modulator. You have found the "Meters & Utilities" expanding section which contains the Modulators as in my screen capture?

Dasheesh · Post by **Dasheesh** » Tue Jan 05, 2021 1:19 pm

^^^ there it is. that little f**ker was hidden pretty good. i didn't even know they were there. thank you.

MeldaProduction

KVR Audio

I give, tutorial needed