KVR Audio

antic604 · Post by **antic604** » Wed Mar 03, 2021 8:39 am

SLiC wrote: Wed Mar 03, 2021 7:48 amHow do I get a discount code? May tip me over the edge!

I just contacted Patrick using the support form on the website, politely explained my situation and got e-mail within 2h with a coupon code

Now I'm considering TAL-Mod, too

That's what great service gives 'ya

Funkybot's Evil Twin · Thu Mar 04, 2021 5:29 pm

Come get your daily update. Version 1.3.7:

Possible crash while switching presets or arpeggiator mode / range fixed.
Arpeggiator mode and range changes whithout pressing a note.
Toggle switch changes with mouse click improved.

...Some of the best bugs are the ones that are fixed before you ever even get the chance to experience them.

zvenx · Post by **zvenx** » Thu Mar 04, 2021 5:32 pm

.. I alas had the first crash and reported it, and then of course Patrick fixed it in less than 24 hours.
rsp

SLiC · Post by **SLiC** » Thu Mar 04, 2021 6:04 pm

antic604 wrote: Wed Mar 03, 2021 8:39 am
SLiC wrote: Wed Mar 03, 2021 7:48 amHow do I get a discount code? May tip me over the edge!
I just contacted Patrick using the support form on the website, politely explained my situation and got e-mail within 2h with a coupon code

Now I'm considering TAL-Mod, too

That's what great service gives 'ya

Thanks, Ditto, TAl -J-8 is now in my ever expanding collection! - Great Developer, deserves all the praise and support!

dermage · Post by **dermage** » Thu Mar 04, 2021 9:55 pm

I reported the mouse click problem on the switches. Did no one have this yet? It has been annoying me since release...

(switch does not always register mouse click)

EnGee · Post by **EnGee** » Thu Mar 04, 2021 9:56 pm

Didn't I update it yesterday? Oh, it's a new update

Thank you

markheath · Post by **markheath** » Thu Mar 04, 2021 10:24 pm

SLiC wrote: Thu Mar 04, 2021 6:04 pm
antic604 wrote: Wed Mar 03, 2021 8:39 am
SLiC wrote: Wed Mar 03, 2021 7:48 amHow do I get a discount code? May tip me over the edge!
I just contacted Patrick using the support form on the website, politely explained my situation and got e-mail within 2h with a coupon code

Now I'm considering TAL-Mod, too

That's what great service gives 'ya
Thanks, Ditto, TAl -J-8 is now in my ever expanding collection! - Great Developer, deserves all the praise and support!

TAL-J-8 was my first TAL plugin purchase only a couple of months ago, and likewise I've been super impressed with the way Patrick runs the company - very responsive to support issues - he fixed the bug I reported, and the no-nonsense approach to copy protection is also a big plus in my book as I quite regularly rebuild my PC and it's always such a pain having to deal the activation hoops for some of my other plugins. It's also nice to see the plugins picking up extra features like the reverb and delay recently added to TAL-UNO-LX.

Anyway today I've added TAL-Sampler, TAL-U-NO-LX and TAL-Dub-X to my collection, so not far off the full set already, since TAL-Sampler also gives me a license for TAL-DAC. Better get to work at making some retro synthwave tracks now.

zvenx · Post by **zvenx** » Thu Mar 04, 2021 10:34 pm

dermage wrote: Thu Mar 04, 2021 9:55 pm I reported the mouse click problem on the switches. Did no one have this yet? It has been annoying me since release...

(switch does not always register mouse click)

No I never did. I saw that as fixed and couldn't figure out what it was about.
rsp

dermage · Post by **dermage** » Thu Mar 04, 2021 11:44 pm

zvenx wrote: Thu Mar 04, 2021 10:34 pm
dermage wrote: Thu Mar 04, 2021 9:55 pm I reported the mouse click problem on the switches. Did no one have this yet? It has been annoying me since release...

(switch does not always register mouse click)
No I never did. I saw that as fixed and couldn't figure out what it was about.
rsp

When clicking on the switches they sometimes do not toggle.
Yes I understand it can also be swiped, but swiping is not a good move when I want to change the switch position quickly. Through a click it should cycle the states, but sometimes it doesn't when clicking. This got better now, but it's still not fixed fully.

zvenx · Post by **zvenx** » Fri Mar 05, 2021 12:02 am

Which switches? Like Knobs for waveforms or ...?
rsp

dermage · Post by **dermage** » Fri Mar 05, 2021 12:30 am

zvenx wrote: Fri Mar 05, 2021 12:02 am Which switches? Like Knobs for waveforms or ...?
rsp

The toggle switches like Filter Slope, VCO Sync etc.

zvenx · Post by **zvenx** » Fri Mar 05, 2021 12:33 am

Ahh.. strangely those have never giving me issues.
But I think I click and slide like I would imagine on a real switch...touch it then move it.
rsp

simmo75 · Post by **simmo75** » Fri Mar 05, 2021 3:30 am

Hope it gets finished soon, all these updates are a pain in the ass.

mholloway · Post by **mholloway** » Fri Mar 05, 2021 3:49 am

simmo75 wrote: Fri Mar 05, 2021 3:30 am Hope it gets finished soon, all these updates are a pain in the ass.

Wow, you have seriously got things totally backwards. And besides, when is a plugin product "finished", would you say? When it never has another bug, ever? I'm guessing you don't know much about software dev.... there's no such thing as "finished." A soft-synth isn't "finished" because the dev stopped posting updates; it's in whatever Current Version exists, and we are all at the mercy of the dev when it comes to addressing the bugs / issues with that Current Version.

But to the main point here: Most products / developers, you'd be waiting MONTHS if not YEARS to get these kinds of fixes done.

The reason there are "all these updates" is because Patrick is actively listening to feedback from his users, actively implementing the fixes, and actively making them available.

I would kill for other devs to provide as many updates as TAL has been providing. It's not the sign of an unfinished product, as you seem to think; all software has bugs and feature requests, and the dev in this case is Listening and Providing. And yet, you complain about it? Christ.

simmo75 · Post by **simmo75** » Fri Mar 05, 2021 4:16 am

mholloway wrote: Fri Mar 05, 2021 3:49 am
simmo75 wrote: Fri Mar 05, 2021 3:30 am Hope it gets finished soon, all these updates are a pain in the ass.
Wow, you have seriously got things totally backwards. And besides, when is a plugin product "finished", would you say? When it never has another bug, ever? I'm guessing you don't know much about software dev.... there's no such thing as "finished." A soft-synth isn't "finished" because the dev stopped posting updates; it's in whatever Current Version exists, and we are all at the mercy of the dev when it comes to addressing the bugs / issues with that Current Version.

But to the main point here: Most products / developers, you'd be waiting MONTHS if not YEARS to get these kinds of fixes done.

The reason there are "all these updates" is because Patrick is actively listening to feedback from his users, actively implementing the fixes, and actively making them available.

I would kill for other devs to provide as many updates as TAL has been providing. It's not the sign of an unfinished product, as you seem to think; all software has bugs and feature requests, and the dev in this case is Listening and Providing. And yet, you complain about it? Christ.

You’re right, I have no interest whatsoever in plugin development, as long as what I bought works as a finished tool, I couldn’t give a monkeys!

Do you have nothing better to do than update plugins on a daily basis?

These are tools for my work, so I can produce music, not because I’m interested in software development, not so I can check if shit needs updating.

Sorry you’re so upset by my post.

Tal J-8