How to output tempo information via osc?
Is there a way to mesure how long the loop or how long the track is, any suggestions?
Msuperlooper tempo output
-
- KVRian
- 915 posts since 12 Sep, 2007
You can do that with your DAW, however that should only work when synced to the DAW.
Make sure your DAW midi output is setup properly.
And of course you'll need to setup OSC for your situation and IP address etc..
Good luck,
Dirk
Make sure your DAW midi output is setup properly.
And of course you'll need to setup OSC for your situation and IP address etc..
Good luck,
Dirk
-
- KVRer
- Topic Starter
- 29 posts since 8 Feb, 2021
I want to know this information via osc because now the only info im getting is volume value
You do not have the required permissions to view the files attached to this post.
-
- KVRian
- 915 posts since 12 Sep, 2007
You might have to calculate it.
Since you know you have 1 bar and it's duration is 2.4 seconds, there should be a way to calculate BPM.
Now doing something with it over OSC is a whole different subject.
Good luck,
Dirk
Since you know you have 1 bar and it's duration is 2.4 seconds, there should be a way to calculate BPM.
Now doing something with it over OSC is a whole different subject.
Good luck,
Dirk