Cherry Audio Voltage modular

VST, AU, AAX, etc. plug-in Virtual Instruments discussion
User avatar
KVRAF
6344 posts since 30 Apr, 2019

Post Sun Apr 18, 2021 9:15 am

MarkBarton wrote:
Sun Apr 18, 2021 12:46 am
Check here for a preset with a method to sync the 1027 sequencer to a DAW.
https://forums.cherryaudio.com/viewtopi ... =12&t=1552
Thanks Mark. The one thing my version has that that one doesn't is it reacts to DAW tempo changes as they happen without needing stop/start.
I've tweaked mine to add logic to check for Play Gate being up and it's an improvement on what I had before.
2500 SLAVED 1027 TO BPM v3.zip
slaving the 1027 to host BPM v3.png
You do not have the required permissions to view the files attached to this post.

KVRer
12 posts since 12 Sep, 2019

Post Sun Apr 18, 2021 3:07 pm

My patch reacts immediately to tempo changes so I'm not sure why you say it doesn't. A problem with your patch is that when you start the sequence, it begins at the 2nd step instead of the first. If you could fix that problem, yours would be the preferred method since it does not require RATE control tweaking for range.

User avatar
KVRAF
6344 posts since 30 Apr, 2019

Post Sun Apr 18, 2021 4:17 pm

MarkBarton wrote:
Sun Apr 18, 2021 3:07 pm
My patch reacts immediately to tempo changes so I'm not sure why you say it doesn't. A problem with your patch is that when you start the sequence, it begins at the 2nd step instead of the first. If you could fix that problem, yours would be the preferred method since it does not require RATE control tweaking for range.
Sorry Mark, I must be losing it :?
For some reason when I tested the patches earlier they didn't seem to respond to tempo change during play and now they do so Lord knows what I was doing. Also, you are quite correct my patch seems to annoyingly start playing at step 2 rather than 1. Would have picked it up quicker, but because I wasn't really treating like what I was sequencing like a 'tune' I missed that entirely. No idea how to get round that other than set the sequencer up on the last step of the played sequence prior to the DAW playing.

KVRer
12 posts since 12 Sep, 2019

Post Sun Apr 18, 2021 9:38 pm

No problem. Perhaps sometime when I get a minute, I'll try to come up with a hybrid of the two approaches. Why don't you give it a go as well.

KVRist
398 posts since 28 Jul, 2006

Post Sun Apr 18, 2021 11:34 pm

The new modules are quite awesome. Great work cherry and mark!

KVRAF
1778 posts since 8 Jun, 2018

Post Sat Apr 24, 2021 10:39 pm

take me as apple as reed-son as flesh-icon, immediately
shits the wise man. hero and blind. take me as
stick as tongue as dog... Music & Soundscraping

User avatar
KVRist
184 posts since 24 Oct, 2008

Post Sun Apr 25, 2021 12:01 pm

hey friends do you know how to remove the demo from the library browser ? i mean make them not visible into the list of the module i own.Thx.
dark musician for dark lover.

KVRian
970 posts since 1 Mar, 2003 from Duston, NN5

Post Sun Apr 25, 2021 4:19 pm

jonalyn wrote:
Sun Apr 25, 2021 12:01 pm
hey friends do you know how to remove the demo from the library browser ? i mean make them not visible into the list of the module i own.Thx.
They should disappear after the demo period has expired.
γνῶθι σαὐτόν

User avatar
KVRist
184 posts since 24 Oct, 2008

Post Mon Apr 26, 2021 2:15 am

kingtubby wrote:
Sun Apr 25, 2021 4:19 pm
jonalyn wrote:
Sun Apr 25, 2021 12:01 pm
hey friends do you know how to remove the demo from the library browser ? i mean make them not visible into the list of the module i own.Thx.
They should disappear after the demo period has expired.
thx for let me know.
Someone know if it is possible to create custom section in the library ?
dark musician for dark lover.

User avatar
KVRian
902 posts since 25 Jan, 2017

Post Mon Apr 26, 2021 3:49 am

Only a "Favorites" list.
I wish it was possible to create your own folders/tags for categorization.


edited: wait... I just checked for the occasion and I see it's possible to make your own tags... was it always like that or introduced as a later upgrade? Very good to know nonetheless :party:

I was especially bothered by having half of my oscillators in "Sources" and half of my filters in "Processors". But at this point I'm reorganizing my entire collection.

Awesome :borg:

User avatar
KVRist
184 posts since 24 Oct, 2008

Post Mon Apr 26, 2021 1:19 pm

Niowiad wrote:
Mon Apr 26, 2021 3:49 am
Only a "Favorites" list.
I wish it was possible to create your own folders/tags for categorization.


edited: wait... I just checked for the occasion and I see it's possible to make your own tags... was it always like that or introduced as a later upgrade? Very good to know nonetheless :party:

I was especially bothered by having half of my oscillators in "Sources" and half of my filters in "Processors". But at this point I'm reorganizing my entire collection.

Awesome :borg:
i 've just try to do it but i don't find how , can you explain please?
dark musician for dark lover.

User avatar
KVRian
902 posts since 25 Jan, 2017

Post Mon Apr 26, 2021 1:32 pm

jonalyn wrote:
Mon Apr 26, 2021 1:19 pm
Niowiad wrote:
Mon Apr 26, 2021 3:49 am
Only a "Favorites" list.
I wish it was possible to create your own folders/tags for categorization.


edited: wait... I just checked for the occasion and I see it's possible to make your own tags... was it always like that or introduced as a later upgrade? Very good to know nonetheless :party:

I was especially bothered by having half of my oscillators in "Sources" and half of my filters in "Processors". But at this point I'm reorganizing my entire collection.

Awesome :borg:
i 've just try to do it but i don't find how , can you explain please?
In the "Library", if you right-click on a module, there's a "Tag Editor..." option which lets you assign that module to a different category or create a new custom category altogether.

KVRAF
1778 posts since 8 Jun, 2018

Post Thu May 06, 2021 4:35 am

dreamscape.jpg

and yes Dreamscape Chapter Two arrived, a project and composed by MLC Vanamsterdam;

->
World,

This is the second composition of #Dreamscape - Chapter Two: "Machines". All parts of this composition are made by MLC Vanamsterdam, Radu Sover, Jim Dunn, Sada Exposada and Sam Nelson, using Cherry Audio's Voltage Modular only.

The guidelines for part two were: Theme: "Machines", BPM: 135, Scale: C LYDIAN SCALE (C = Root | C D E F# G A B)and Genre: No-limitations.

In the end I used 114 tracks, 75 mixer-channels and 122 wave-samples.

Thanks to all contributers for making this possible. Again, it's a journey.

I hope in future we will create more chapters for #Dreamscape. My goal is to reach an hour.
<-

https://soundcloud.com/dreamscape_vmmp/ ... -chapter-2
You do not have the required permissions to view the files attached to this post.
take me as apple as reed-son as flesh-icon, immediately
shits the wise man. hero and blind. take me as
stick as tongue as dog... Music & Soundscraping

KVRAF
1778 posts since 8 Jun, 2018

Post Sun May 09, 2021 2:15 am

a nice Freebie! from Request For Music, a new developer. very interesting modules will come!

as introduction a 80's light organ, but has special capabilities... check it out yourself!


RFM_LO-1.png

https://store.cherryaudio.com/modules/rfm-lo-1
You do not have the required permissions to view the files attached to this post.
take me as apple as reed-son as flesh-icon, immediately
shits the wise man. hero and blind. take me as
stick as tongue as dog... Music & Soundscraping

KVRist
270 posts since 1 Oct, 2018

Post Fri May 14, 2021 9:30 am

Image

Cherry Audio has released the newly updated MS Vintage Bundle mkII for Voltage Modular - now including the new EG-20 and Poly EG-20 Envelope Generator modules!

Already own the MS Vintage Bundle? You'll receive 20% off of Cherry Audio's new PS-20 Synthesizer, an ultra-realistic, polyphonic, hot-rodded tribute to Korg's renowned MS-20 synthesizer.

Image

Return to “Instruments”