sj1 wrote: ↑Wed Nov 17, 2021 4:04 pm I do notice though in the Piano Chord Pattern generator that regenerating at the end of the loop does not respect the user's unchecking of either Right Hand or Left Hand.
Instead, the regeneration seems to take over and always turn on, regenerate, and sound both the Right and Left Hand.
RapidComposer v4 beta feedback and discussion (locked)
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5434 posts since 9 Jan, 2010
It behaves correctly here. If you enabled left hand only, the left hand part is displayed and regenerated at the end of the loop. The right hand settings are not changed, so when you enable the right hand again, it will have the original notes. I could not reproduce this one.
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
- KVRian
- 995 posts since 13 Mar, 2017
Hmmm. Maybe you were on Mac and it's a Windows thing?musicdevelopments wrote: ↑Thu Nov 18, 2021 2:35 pm It behaves correctly here. If you enabled left hand only, the left hand part is displayed and regenerated at the end of the loop. The right hand settings are not changed, so when you enable the right hand again, it will have the original notes. I could not reproduce this one.
Here's a video link.
https://www.screencast.com/t/mbEn2poELml
No narration, but the piano output audio starts partway thru. You'll at least see what I'm talking about.
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5434 posts since 9 Jan, 2010
I see! You disabled the left hand then the right hand but did not press 'Apply'...
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
- KVRian
- 995 posts since 13 Mar, 2017
OK, I now see how Apply and Auto-Apply work here. Thanks very much!
FWIW, to me turn on/off "the sound of the hand" and turning on/off the "regeneration of the hand" are logically two distinctly different operations each of which I would ideally have control over.
IOW, if I for example get a Left Hand sound I want to keep hearing, I would like to turn of the "regeneration of the Left hand" while still hearing it and continuing to regenerate new versions of the Right Hand.
Tweaky, I know - for your consideration!
-
- KVRist
- 245 posts since 11 May, 2014
That's great news.musicdevelopments wrote: ↑Thu Nov 18, 2021 2:14 pm Good news! The UI flashes have been fixed, so I'll have a beta version for Apple M1 tomorrow if all goes well.
Thanks!
Attila
ValliSoftware wrote: ↑Wed Nov 17, 2021 11:20 pmDo you have a beta for the Apple M1.musicdevelopments wrote: ↑Tue Nov 16, 2021 5:20 pm The Apple M1 build is working well, except it has an unexpected UI issue (flashes). At the moment I don't know why and how to fix it.
I'd be testing the MIDIFX part of it. Does that have the UI flashes issue?
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5434 posts since 9 Jan, 2010
RapidComposer v4.3b10 is available (macOS only!)
This one is for macOS only. Fat binaries are included for the standalone and plug-ins including both Intel (x86_64) and Apple M1 (arm64) architectures. In the version string you'll see "arm64" when running the native M1 version, otherwise "x64" is displayed.
Please let me know if you find any issues.
Thanks!
Attila
This one is for macOS only. Fat binaries are included for the standalone and plug-ins including both Intel (x86_64) and Apple M1 (arm64) architectures. In the version string you'll see "arm64" when running the native M1 version, otherwise "x64" is displayed.
Please let me know if you find any issues.
Thanks!
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5434 posts since 9 Jan, 2010
Anyone tried the Apple M1 version already? Here is a new beta version, this time for Windows only:
RapidComposer v4.3b10 is available (Windows only!)
Improvements:
Thanks,
Attila
RapidComposer v4.3b10 is available (Windows only!)
Improvements:
- First release of hardware accelerated UI: smooth scrolling everywhere with acceleration/deceleration
Thanks,
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
- KVRist
- 265 posts since 10 Feb, 2018 from Cumbria, UK
Hi Attila. Re upate above. I can't seem to load any vsts onto tracks nor open any compositions with vsts.
RC shows "Loading" in the track inspector > Preset
The vst loads ok in reaper so it's not the vst.
I'll check further.
Cheers.
Mike.
RC shows "Loading" in the track inspector > Preset
The vst loads ok in reaper so it's not the vst.
I'll check further.
Cheers.
Mike.
Symphony No 1 - https://youtu.be/nVVJMyjOVAY
New Album: Secret Whispers - https://open.spotify.com/album/4XtNkk6z6tngFaubnC3fME
New Single: Shiny Emeralds https://youtu.be/kaLThaPDrhg
http://www.blues-house.com/
New Album: Secret Whispers - https://open.spotify.com/album/4XtNkk6z6tngFaubnC3fME
New Single: Shiny Emeralds https://youtu.be/kaLThaPDrhg
http://www.blues-house.com/
-
- KVRAF
- 1857 posts since 15 May, 2017
yea, mine not working either.. not locked up, stuff kind of works, but, dialogs don't change, stuck on loading screen.. etc...
-
- KVRist
- 245 posts since 11 May, 2014
Two things, otherwise RC Beta it's working pretty good in Logic as a MIDIFX on my M1 MacMini.
First, can you also make the pkg installer Apple Silicon, I notice it wants to install Rosetta 2 which I'm not going to do. I have a Intel MacMini for Intel apps, but my M1 MacMini is for Apple Silicon apps.
Second, I notice on the first pass everything is fine as the notes are turned off but if I leave it to loop, right away the notes get hung.
First pass, all notes are off
Once it loops, the notes are hung right away. I can make a video of this if you'd like.
First, can you also make the pkg installer Apple Silicon, I notice it wants to install Rosetta 2 which I'm not going to do. I have a Intel MacMini for Intel apps, but my M1 MacMini is for Apple Silicon apps.
Second, I notice on the first pass everything is fine as the notes are turned off but if I leave it to loop, right away the notes get hung.
First pass, all notes are off
Once it loops, the notes are hung right away. I can make a video of this if you'd like.
-
- KVRist
- 245 posts since 11 May, 2014
An update on this.
If I make it a 32 bar, when it loops back, no hung notes.
If I make it a 32 bar, when it loops back, no hung notes.
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5434 posts since 9 Jan, 2010
Hi Mike,
thank you! I built an update where VSTi's work well. So...
RapidComposer v4.3b11 is available (Windows only!)
Fixes:
Attila
thank you! I built an update where VSTi's work well. So...
RapidComposer v4.3b11 is available (Windows only!)
Fixes:
- VSTi's can be loaded again
Attila
Mykyndryd_ wrote: ↑Sun Nov 21, 2021 7:24 pm Hi Attila. Re upate above. I can't seem to load any vsts onto tracks nor open any compositions with vsts.
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
-
musicdevelopments musicdevelopments https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=223336
- KVRAF
- Topic Starter
- 5434 posts since 9 Jan, 2010
Hi ValliSoftware!
Many thanks for trying the M1 version of RapidComposer!
I did not realize that the .pkg file had a "HostArchitectures" setting! I managed to fix this today.
I'll definitely check the hanging note issue!
Thanks!
Attila
Many thanks for trying the M1 version of RapidComposer!
I did not realize that the .pkg file had a "HostArchitectures" setting! I managed to fix this today.
I'll definitely check the hanging note issue!
Thanks!
Attila
https://www.musicdevelopments.com
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
Home of RapidComposer, Melodya, MIDI Mutator and Syne
All software 40% off during the Anniversary Sale until April 29!
-
- KVRist
- 245 posts since 11 May, 2014
Thanks.musicdevelopments wrote: ↑Mon Nov 22, 2021 6:34 pm Hi ValliSoftware!
Many thanks for trying the M1 version of RapidComposer!
I did not realize that the .pkg file had a "HostArchitectures" setting! I managed to fix this today.
I'll definitely check the hanging note issue!
Thanks!
Attila
So far, this is awesome in Logic.
What I like about this MIDIFX version is I set the instruments in Logic and since I have customized scripts I've created, I can apply those to each individual instruments.
-
- KVRAF
- 1857 posts since 15 May, 2017
yea, the rules tab doesn't look like the rules tab you pm'ed me.. it's the old version still..