Vengeance Producer Suite - AVENGER - 1.8.5 the main thread

VST, AU, AAX, CLAP, etc. Plugin Virtual Instruments Discussion
Post Reply New Topic
RELATED
PRODUCTS
VPS Avenger

Post

invisiblesun wrote: Mon Sep 13, 2021 9:15 pm
DigiPRO wrote: Fri Sep 10, 2021 6:15 am I have some weird VST3 version issues.

If using a pitch bender in a VPS Avenger VST3 preset, the next loaded preset loads out of tune, so I need to reset it by moving the pitch bender again.

That only happens with VPS Avenger VST3.

I had an email conversation with their support, but without any solution to my problem.

I want to ask if this is a common/documented bug, or am I alone with this bug?

Using the VSP Avenger 1.7 and Cubase Pro 10.5 with a lot of RAM on PC.

I have no probe using the VSP Avenger VST2, but from the computer resource standing point, the VST3 version should be much more CPU-friendly.

I hope someone can shed some light on this one.
Is it this?
https://www.youtube.com/watch?v=q4YbSa6V4E4

If so, I have the same issue. Made a forum post about it a while ago and promised to report back after troubleshooting. Well it happens with any keyboard/ controller and it only happens with Avenger. So I am pretty sure it's an Avenger issue. Now that we are two that have this, maybe the devs will look into it.

Cheers MW
Yes, exactly that's the error. I gave up using the VST3 version of Avenger because of this. Maybe They've fixed this in 1.8.0 but I can't confirm that because of 1.8.0. the installer seems to install the 32-bit version. I've opened a ticket. Thank you for bringing this to life again.

Post

In short: Is it possible to download the 1.7.0 VPS Avenger installer version?

After installation of VPS Avenger 1.8.0., the DAW sequencers show the x64 VPS Avenger as an 'incompatible 32-bit file'. The VST3 version is nowhere to be found.

As I'm waiting on the support to respond, is it possible to download the previous installer version which would be 1.7.0. Can't find it on the web.

Thanks in advance.

Post

DigiPRO wrote: Mon Dec 06, 2021 5:49 am In short: Is it possible to download the 1.7.0 VPS Avenger installer version?

After installation of VPS Avenger 1.8.0., the DAW sequencers show the x64 VPS Avenger as an 'incompatible 32-bit file'. The VST3 version is nowhere to be found.

As I'm waiting on the support to respond, is it possible to download the previous installer version which would be 1.7.0. Can't find it on the web.

Thanks in advance.
Solved by VPS Avenger support Andre, I got the 1.8.1. installer and it works now. Thanks a lot for the super-fast resolution.
Last edited by DigiPRO on Mon Dec 06, 2021 9:18 am, edited 1 time in total.

Post

invisiblesun wrote: Mon Sep 13, 2021 9:15 pm
DigiPRO wrote: Fri Sep 10, 2021 6:15 am I have some weird VST3 version issues.

If using a pitch bender in a VPS Avenger VST3 preset, the next loaded preset loads out of tune, so I need to reset it by moving the pitch bender again.

That only happens with VPS Avenger VST3.

I had an email conversation with their support, but without any solution to my problem.

I want to ask if this is a common/documented bug, or am I alone with this bug?

Using the VSP Avenger 1.7 and Cubase Pro 10.5 with a lot of RAM on PC.

I have no probe using the VSP Avenger VST2, but from the computer resource standing point, the VST3 version should be much more CPU-friendly.

I hope someone can shed some light on this one.
Is it this?
https://www.youtube.com/watch?v=q4YbSa6V4E4

If so, I have the same issue. Made a forum post about it a while ago and promised to report back after troubleshooting. Well it happens with any keyboard/ controller and it only happens with Avenger. So I am pretty sure it's an Avenger issue. Now that we are two that have this, maybe the devs will look into it.

Cheers MW
I can confirm that this has not been resolved yet after installing 1.8.1. version. Have you opened a ticket for this issue?

Post

soooo... I just updated my avenger and v-manager... Are we have a new copy protection system now? I can delete CodeMeter? Should I deactivate the license in CodeMeter first?
Was using 1.7 for a loooong time... didn't know we have 1.8 now

UPD. just checked FB group and there's post about codemeter dropout due M1 compatibility - great!

Post

JohnRosso wrote: Tue Dec 07, 2021 9:07 am soooo... I just updated my avenger and v-manager... Are we have a new copy protection system now? I can delete CodeMeter? Should I deactivate the license in CodeMeter first?
I updated to 1.8, made that license system work then deleted CodeMeter. All good.
http://www.guyrowland.co.uk
http://www.sound-on-screen.com
W10, i7 7820X, 64gb RAM, RME Babyface, 1050ti, PT 2023 Ultimate, Cubase Pro 13
Macbook Air M2 OSX 10.15

Post

I just upgraded from 1.4.8 to version 1.8.0 - running the factory content installer in VMan crashed Logic instantly, after that I wasn't able to install the factory content file as it had changed its size from 6+ GB to 0KB, now I'm downloading the content again.

Post

Sampleconstruct wrote: Tue Dec 07, 2021 11:46 am I just upgraded from 1.4.8 to version 1.8.0 - running the factory content installer in VMan crashed Logic instantly, after that I wasn't able to install the factory content file as it had changed its size from 6+ GB to 0KB, now I'm downloading the content again.
Logic keeps on crashing when trying to install the factory content via VMAN, hmmm....
----
EDIT
ok, I finally got it working without using the VMAN thing.

Post

DigiPRO wrote: Mon Dec 06, 2021 9:17 am
invisiblesun wrote: Mon Sep 13, 2021 9:15 pm
DigiPRO wrote: Fri Sep 10, 2021 6:15 am I have some weird VST3 version issues.

If using a pitch bender in a VPS Avenger VST3 preset, the next loaded preset loads out of tune, so I need to reset it by moving the pitch bender again.

That only happens with VPS Avenger VST3.

I had an email conversation with their support, but without any solution to my problem.

I want to ask if this is a common/documented bug, or am I alone with this bug?

Using the VSP Avenger 1.7 and Cubase Pro 10.5 with a lot of RAM on PC.

I have no probe using the VSP Avenger VST2, but from the computer resource standing point, the VST3 version should be much more CPU-friendly.

I hope someone can shed some light on this one.
Is it this?
https://www.youtube.com/watch?v=q4YbSa6V4E4

If so, I have the same issue. Made a forum post about it a while ago and promised to report back after troubleshooting. Well it happens with any keyboard/ controller and it only happens with Avenger. So I am pretty sure it's an Avenger issue. Now that we are two that have this, maybe the devs will look into it.

Cheers MW
I can confirm that this has not been resolved yet after installing 1.8.1. version. Have you opened a ticket for this issue?
HI! Thanks for joining in on this. I have opened a support ticket about the issue today. So we'll see.

Post

Just doing some housekeeping on the Mac - I noticed I have the following:

VPS_Avenger_XP_Factory.avxp2 - 6.25gb (6 Dec 2019)

and

Factory.avxp - 5.07gb (folder whose contents are older, but the init update in 1.8.1 updated in here).

Do I need both of these? Thanks for any help.
http://www.guyrowland.co.uk
http://www.sound-on-screen.com
W10, i7 7820X, 64gb RAM, RME Babyface, 1050ti, PT 2023 Ultimate, Cubase Pro 13
Macbook Air M2 OSX 10.15

Post

no you only need the avxp2, the bigger file

Post

msvs wrote: Tue Dec 07, 2021 10:52 pm no you only need the avxp2, the bigger file
Great, thanks Manuel.
http://www.guyrowland.co.uk
http://www.sound-on-screen.com
W10, i7 7820X, 64gb RAM, RME Babyface, 1050ti, PT 2023 Ultimate, Cubase Pro 13
Macbook Air M2 OSX 10.15

Post

Well shit, sold my license a couple years ago due to CM. Sadly - since this is a great synth.

Guess I’ll have to start hunting the marketplace for a second-hand license now.

Post

Manuel, any plans you can reveal regarding future expansions? Maybe Tech House 2, Techno 2 or Retrowave 80s 2? 🤭

Post

this year will come Italo Disco 2 and Melodic Techno 1

Post Reply

Return to “Instruments”