KVR Audio

BONES · Post by **BONES** » Thu Jun 30, 2022 2:58 am

I just found this email in my Junk folder, from Embodme's head of communication and marketing -

Hello guys,

We understand your concerns, because they are ours too. This is why I am writing this.

Transparently, we understand the struggle for ETA, because we are as impatient as you are! But it is something we are trying to control and unfortunately cannot; as we do not manufacture the parts. There has been many delays because our manufacturer in China is still struggling with the shortage of parts and the pandemic, it takes more than 2 weeks for them for every package they receive to decontaminate, it's pretty bad over there and all their deadlines have been delayed to their clients as well.

Let's hope they will be able to send them asap as promised. We have updated our website a while ago into a "pre-order" state, until we receive the massive batch we requested.

As for the time being, we are pleased to do any requested refund until you guys can purchase again when we are fully back in stock again in a month or two, if that reassures your position in regards to your order. We fully understand your decision to do so.

There is nothing to hide on our end, but a passion for music technology. And as always, we like keeping you inside the loop with us.

Sorry for the inconvenience, but we are being as transparent as we can be.

We will keep you updated. We did not forget you and your support.

I'll be patient, I'm in no hurry and I appreciate them offering a refund.

SLiC · Post by **SLiC** » Thu Jun 30, 2022 5:52 am

Well, if you want one (and I do!) then you have no choice to be patient (same with Osmose)…hopefully soon, I’m on the notify list at Juno, a UK shop that’s going to stock them.

BONES · Post by **BONES** » Fri Jul 01, 2022 12:17 am

I am far less patient for my new car and I know I won't get that before September, and possibly not until the end of the year. With the Erae Touch, I am buying it as much to support the company/product as anything else, and I've already done that by paying for mine. Actually getting it can wait.

SLiC · Post by **SLiC** » Mon Jul 04, 2022 2:04 pm

BONES · Post by **BONES** » Tue Jul 05, 2022 2:49 am

Is there a more jingoistic mob than the French? Of course they had to use Pigments, it couldn't be anything from a German, British or American company. But it does look pretty damned cool.

Hink · Post by **Hink** » Wed Jul 06, 2022 11:11 pm

BONES wrote: Fri Jul 01, 2022 12:17 am I am far less patient for my new car and I know I won't get that before September, and possibly not until the end of the year. With the Erae Touch, I am buying it as much to support the company/product as anything else, and I've already done that by paying for mine. Actually getting it can wait.

I bought a new Sabaru Crosstrek in May, I was told it might be June but likely August...I can wait if it takes longer, not driving as much these days. I have a '16 Nissan Rogue now, got about 110,000 miles on it but unless I leave the ignition on or something stupid like that (did that last night

) it's pretty good to me still so if it takes a bit it does...I was told it might be a 2023 model.

BONES · Post by **BONES** » Wed Jul 06, 2022 11:27 pm

I put two deposits down in April, one for a new Subaru BRZ and the other for its Toyota GR86 twin, and I'll take whichever one I can get first. I'm waiting for the rain to stop here, if it ever does, so I can get my current BRZ detailed and put it on the market. I don't know what it's like elsewhere, but right now the used car market here is out of control. Going by prices I've seen, I could probably get more that I paid for my car right now, even though I''ve had it for almost 5 years. Since I changed jobs a couple of months ago, it sits on the street Mon-Fri and I don't want to hold onto it until supply issues ease and prices drop. It's only got 39,000 km on it and I just spent a grand getting all the little parking lot dents and scratches taken out of it, so with a full detail it will look pretty much like new again.

Hink · Post by **Hink** » Thu Jul 07, 2022 12:29 am

I'm trading my car in (and buying with cash), this will likely be my last car anyhow...

BONES · Post by **BONES** » Thu Jul 07, 2022 2:48 am

Yeah. I am planning on this being my last ever car and, honestly, if the new model hadn't been such a solid improvement on the current one, I'd probably be sticking with the one I have. But if I update now, I'll have paid out the finance before I retire, so now is definitely the time.

BONES · Post by **BONES** » Thu Jul 14, 2022 4:26 am

Mid July and no news from Embodme. Hopefully it won't be long now.

BONES · Post by **BONES** » Mon Jul 18, 2022 9:07 am

I just got an update from Embodme -

"Our manufacturers have started assembly and will start delivering your units in the coming 3-4 weeks hopefully. We just received news this morning. I thought you guys would want to stay in the loop."

Yee-ha!

SLiC · Post by **SLiC** » Mon Jul 18, 2022 9:52 am

Good news- I look forward to your review

mikeyfam1 · Post by **mikeyfam1** » Tue Aug 09, 2022 1:36 pm

Anyone using this regularly yet? Had a morph for a while but I wasn't a huge fan of performing on a flat surface. I assume this is a pretty similar experience? It seems to have more travel. Is it easy to map?

Naenyn · Post by **Naenyn** » Mon Aug 15, 2022 2:40 am

Echoes in the Attic wrote: Sun Jan 16, 2022 4:12 pm So how does it feel? Compared to for example roli lightpad blocks?

Can anyone answer this? I've got a Lightpad Block SE and am very curious to know how the Erae feels in comparison.

SLiC · Post by **SLiC** » Mon Aug 15, 2022 6:56 am

I’m not sure anyone actually has one yet, they seem to have parts/supply issues.

Erae Touch - All-around MIDI 2.0 controller?