DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.1)

[diatonicbreaks]

I will have another check, it functions with the EQ though but just won't talk too to any VSTs

[excuse my arrogance!]

Is there somehow a way to adjust the velocity curve under "drivenbymoss" script for the Launchpad Pro MK3?

I can not find it in the manual. And when i push the setup button nothing happens with how to adjust it like with the original behaviour.

[moss]

Is there somehow a way to adjust the velocity curve under "drivenbymoss" script for the Launchpad Pro MK3?

I can not find it in the manual. And when i push the setup button nothing happens with how to adjust it like with the original behaviour.

Sorry, no.

[excuse my arrogance!]

Is there somehow a way to adjust the velocity curve under "drivenbymoss" script for the Launchpad Pro MK3?

I can not find it in the manual. And when i push the setup button nothing happens with how to adjust it like with the original behaviour.

Sorry, no.

Ok no complaints about the script but it would be cool to have it. The velocity curve is way too sensitive for me....i have adjusted it with Ableton to the lowest velocity settings and turns out right for my playing

[xtreme sounds]

Hi there sir. I have a question regarding the akai fire script and the mixer track pattern mode (shift button), When we select a track does it open up the vst plugin gui each time? Is there a way we could get a way to do that without selecting the pattern to playback just to reveal the plugin screen? IF not its ok. My goal is to have a mouse free way to view each vst on each track during a performance so I can tweak knobs if I dont have them set as device knobs in Bitwig.

[moss]

Hi there sir. I have a question regarding the akai fire script and the mixer track pattern mode (shift button), When we select a track does it open up the vst plugin gui each time? Is there a way we could get a way to do that without selecting the pattern to playback just to reveal the plugin screen? IF not its ok. My goal is to have a mouse free way to view each vst on each track during a performance so I can tweak knobs if I dont have them set as device knobs in Bitwig.

Showing/Hiding the plugin window when changing tracks is handled by Bitwig. To hide/show the window of the currenlty selected plugin press the SELECT knob.

[trevormeier]

Hi @moss - I've been using the new Launch Control XL script. It's working great! One request - I'm using some of the extra unused templates to manually assign MIDI to some device remote parameters. This works great for knobs & faders. For buttons though, there's no indication whether the button is on or off.

Would it be possible to add a section to the script that toggles between two velocity values (to set the LED color)? This would be kind of the like the "User Parameters" sections in your other scripts, but for the Launch Control.

Thanks again for everything!

[moss]

Hi @moss - I've been using the new Launch Control XL script. It's working great! One request - I'm using some of the extra unused templates to manually assign MIDI to some device remote parameters. This works great for knobs & faders. For buttons though, there's no indication whether the button is on or off.

Would it be possible to add a section to the script that toggles between two velocity values (to set the LED color)? This would be kind of the like the "User Parameters" sections in your other scripts, but for the Launch Control.

Thanks again for everything!

It is already on my TODO list.

[function]

hey will the new DrivenByMoss-18.1.0-Bitwig work with bitwig 4.4?

also my push2 LED lights don't seem to work at moment. can anyone point me to the push2 display drivers that I should be using? I seem to recall there were a few versions floating around.

[moss]

hey will the new DrivenByMoss-18.1.0-Bitwig work with bitwig 4.4?

Yes. The noted version number on the download page is always the minimum version you need.

also my push2 LED lights don't seem to work at moment. can anyone point me to the push2 display drivers that I should be using? I seem to recall there were a few versions floating around.

You do not need any drivers. Do you have power plugged in?

[xtreme sounds]

HI the launch control xl script is some involved I think we need a custom overlay for it. https://www.taktility.com/overlays/launch-control-xl/

[dupont]

I would like my APC40 to start in session view mode.
Currently I must hold shift and first row of the top scene launch button on the APC40.
Is it the purpose of the setting of the Jurgenbymoss drivers setting : play sequence, default view mode, play ?
I tried several settings but it does not start APC40 in session mode.

[trevormeier]

Would it be possible to add a section to the script that toggles between two velocity values (to set the LED color)?

It is already on my TODO list.

Amazing! I've been using the Launch Control XL script for a little while now and have a few fine-tuning suggestions, especially for live performance.

One request is an option to limit the parameter ranges for note and EQ editing. Right now the useful ranges require very fine movements which are difficult in a live performance setting. I don't often need access to the full range of C-2 to F8!

Could you add an option to limit note editing and EQ gain to, say, 1-3 octaves? With perhaps a "base octave" setting for notes? It would also be useful to have the knob's centre detent (MIDI value 65 I think?) match the root note of the scale set for the project. This range and base octave could even be adjustable from the controller somehow, to allow for quick changes from editing a bass line to a lead line... but that might be too complex. Simple is good!

Another request is an aid for navigating pages in the sequencer. Right now it's difficult because I have to remember the number of pages in each clip. It's easy to accidentally add notes beyond the end of the clip.

Could you have the bottom row of LEDs light up corresponding to the total number of sequencer pages, with the currently selected page being the brightest? This could appear when holding down the "track select" buttons, or briefly appear when pressing buttons to move between pages?

Finally, for the melody sequencer, it would be useful to have the middle row of knobs set the note/gate length (rather than ratchets) as I tend to only use ratchets on rhythmic parts.

These changes would make the Launch Control a very expressive live performance controller!
Thanks for creating such a great tool for us!

[moss]

I would like my APC40 to start in session view mode.
Currently I must hold shift and first row of the top scene launch button on the APC40.
Is it the purpose of the setting of the Jurgenbymoss drivers setting : play sequence, default view mode, play ?
I tried several settings but it does not start APC40 in session mode.

Since this came up sometimes in the last time, I will add it to the wishlist.

[moss]

One request is an option to limit the parameter ranges for note and EQ editing. Right now the useful ranges require very fine movements which are difficult in a live performance setting. I don't often need access to the full range of C-2 to F8!
Could you add an option to limit note editing and EQ gain to, say, 1-3 octaves? With perhaps a "base octave" setting for notes? It would also be useful to have the knob's centre detent (MIDI value 65 I think?) match the root note of the scale set for the project. This range and base octave could even be adjustable from the controller somehow, to allow for quick changes from editing a bass line to a lead line... but that might be too complex. Simple is good!

I thought about limiting the notes but found it actually quite usaable. Not sure if I will change something here.

Another request is an aid for navigating pages in the sequencer. Right now it's difficult because I have to remember the number of pages in each clip. It's easy to accidentally add notes beyond the end of the clip.
Could you have the bottom row of LEDs light up corresponding to the total number of sequencer pages, with the currently selected page being the brightest? This could appear when holding down the "track select" buttons, or briefly appear when pressing buttons to move between pages?

Problem is that there is no end of a clip in Bitwig. What could be displayed is the loop range. Will look into that.

Finally, for the melody sequencer, it would be useful to have the middle row of knobs set the note/gate length (rather than ratchets) as I tend to only use ratchets on rhythmic parts.

I can put that on the RecArm combination key.