KVR Audio

Midiworks · Post by **Midiworks** » Thu Dec 23, 2004 7:57 am

Ok, I am not not finished testing.

Extern midi in works but no NOTE OFF,
so I have to forct quit task.

Just a request please:
Can you please always set the sf2 to have a longer
Release time, when dumping please ?
Than testing the saved sf2 is nicer
and the ADSR, can than be changed directly with
sfz or other sf2-players.

(or the Articulation will still act like OFF)

Also a "NORMALIZE", would be very good.
But !
You have to find the loudest wav of a dump first
and then normalize all other wav in relation to this.
Simply normalizing every sample will not be very good.
Add a check box for NORMALIZE (on/off)

I continue testing !

Good work CCT !!!

CCT · Post by **CCT** » Thu Dec 23, 2004 10:14 am

Ok

And about midi in - i dont have a midi controller

i just tested it with midi yoke, and note off messages were sended...

Greetz

Amberience · Post by **Amberience** » Thu Dec 23, 2004 10:18 am

This project is going very well! I'm impressed.

Sascha Franck · Post by **Sascha Franck** » Thu Dec 23, 2004 10:24 am

Sorry for not commenting on the last builds.
Will take the lastest one with me on my laptop when going to my parent's place over x-mas and get back to you next week!

Seems you're doing a kickass job, CCT!

CCT · Post by **CCT** » Thu Dec 23, 2004 8:57 pm

Hello

Good news is that my friend lend me his old Yamaha V50

I fixed midi in bug, also i created new device - input.
New input device can:
- be placed anywhere in chain
- send midi messages to midi out
- act as VSTi instrument.
So what it mean ?
Today i created first sf2 from external device
(dumped one full preset from V50

)
Direct Sound driver was removed, but ASIO driver selector was added

http://audiolabz.com/vd04pd.jpg

Becase i need to code latency compensation for input device (- there will be possible to mix vsti plugins and external devices and create new sounds from them)
and make some things more usable - next release at monday.

Greetz

Midiworks · Post by **Midiworks** » Thu Dec 23, 2004 9:24 pm

Wao CCT !!!

You are so fast coding, when you don't surf the Internet !

I am really impressed !

Oh, I nearly forgot...

Merry Christmas everybody !

Sascha Franck · Post by **Sascha Franck** » Thu Dec 23, 2004 9:26 pm

CCT wrote: So what it mean ?
Today i created first sf2 from external device
(dumped one full preset from V50

!!!

Becase i need to code latency compensation for input device (- there will be possible to mix vsti plugins and external devices and create new sounds from them)
and make some things more usable - next release at monday.

nutsadamus · Post by **nutsadamus** » Thu Dec 23, 2004 9:51 pm

This sounds incredible.
I can hardly wait to get back from the holidays and try this out!

AndreasE · Post by **AndreasE** » Thu Dec 23, 2004 10:22 pm

And I can hardly wait for the final release. I wonder how much it will cost ...

CCT · Post by **CCT** » Fri Dec 24, 2004 11:00 am

AndreasE: tool is under donationware licence - so it costs as much as you like

Greetz

Merry Christmas

Midiworks · Post by **Midiworks** » Fri Dec 24, 2004 9:25 pm

Great that hardware dumping works !
How did you do it ?

Shall I make you crazy CCT ?

How about a "Rewire" dump too ?
Should work just like the hardware synth dump.
(not so sure about this, but could work)

Anyway... the most important thing is to get the
looping working !

Merry Christmas !

CCT · Post by **CCT** » Sat Dec 25, 2004 6:28 pm

V-dumper got new gui

http://audiolabz.com/vd04n.jpg

Also autolooping is ready (experimental, but works)
Depth wheel is for xfade depth or length (in percents)
Size is for loop size (in percents)

Loop end is setted near noteoff message.

Midiworks: external device sampling was simple

I just needed following ingredients:
- audio input (from asio)
- new sampling mode (realtime)
- buffered temp file saving
- plugin that capture signal from input and sends
it to mixing engine (simple fifo queue) and
sends midi messages to device.
- envelope detector to cut samples

Unfortunately i cant send bigger files to server - i created some sf2 from v50, autolooped etc.

cool.

Hmm rewire... but how to get sdk ?

Greetz

Caleb · Post by **Caleb** » Sun Dec 26, 2004 2:27 am

CCT - the new GUI looks wonderful.

Is there a new link to download the latest version?

Caleb

Jeremy_NSL · Post by **Jeremy_NSL** » Sun Dec 26, 2004 3:22 am

Just stumbled on this thread. Great idea and great work so far CCT! I've used Chainer in the past to create samples, and I'd love something that automates more of the process:

-creates multisamples in 32-bit 96khz
-removes silence below a threshold db level
-normalizes each sample
-downsamples to 16/44 or 32 khz
-auto-crossfade loops each sample

Also its very cool what you've done to enable dumping external gear

Too bad I sold all of mine

Oh well, maybe I'll rent a few synths from the music store when this program is complete

vurt · Post by **vurt** » Sun Dec 26, 2004 3:25 am

only just discovered this

seems great but...
cant seem to get it to dump at the moment,it goes through the motions but the files are empty?
as i say only just discovered it so gimme time to read the thread and manual

VSTi -> sf2