TAL-Drum (v2.6.1)
-
- KVRist
- 115 posts since 3 Dec, 2006 from UK
Patrick may not have the most obvious announcement system, but at least he does regularly update. Incredible support imho.
I still haven't bought into this plugin though as being an Ableton user I really don't need it. However, the moment Patrick implements a synthesis system in Drum, I will seriously consider jumping in.
I still haven't bought into this plugin though as being an Ableton user I really don't need it. However, the moment Patrick implements a synthesis system in Drum, I will seriously consider jumping in.
-- Blake Casimir : Check out my recently updated Bandcamp for melodic space techno!
http://blakecasimir.bandcamp.com
http://www.blakecasimir.co.uk
http://blakecasimir.bandcamp.com
http://www.blakecasimir.co.uk
-
Septic Underground Septic Underground https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=544534
- KVRist
- 380 posts since 27 Dec, 2021 from Nederland
did you switch the one shot play mode off? Otherwise it will just play the sample and bypass the env.
SEPTIC UNDERGROUND™
soundcloud.com/septicstudio
Full Albums here: https://www.jamendo.com/artist/349214/s ... und/albums
https://soundcloud.com/septicstudio/sets/zombi-ritual
soundcloud.com/septicstudio
Full Albums here: https://www.jamendo.com/artist/349214/s ... und/albums
https://soundcloud.com/septicstudio/sets/zombi-ritual
-
- KVRian
- 655 posts since 20 Jun, 2010
One shot was activated but turning it off didn't change anything. Attack, hold, decay and sustain do what they're supposed to do, but release doesn't change the curve in the sample display in any way.
I'm on the demo version if that matters.
I'm on the demo version if that matters.
- KVRAF
- 13458 posts since 16 Feb, 2005 from Kingston, Jamaica
And you are using the envelope top right not in the middle at the bottom tabs.
That is the red one not the yellow (sometimes I haven't used Tal-Drums in awhile and I revert to Env1 for synth muscle memory which is the wrong one here).
rsp
That is the red one not the yellow (sometimes I haven't used Tal-Drums in awhile and I revert to Env1 for synth muscle memory which is the wrong one here).
rsp
You do not have the required permissions to view the files attached to this post.
sound sculptist
-
- KVRian
- 655 posts since 20 Jun, 2010
Yeah, I'm using the amp env above the filter env in the top right corner, on the left side is the mapping section and below is a wave form display with the amp env curve drawn on it. When I turn the other knobs, like attack, hold, etc. the curve changes, but release doesn't.
edit: ah yeah screenshots now, yes I'm using the env in the red box
edit: ah yeah screenshots now, yes I'm using the env in the red box
-
concealed identity concealed identity https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=215821
- KVRian
- 555 posts since 21 Sep, 2009
Just to confirm, are you saying that editing the Release doesn't change the curve visually, or that it doesn't change the curve visually AND it has no effect when playing? If you load in a long sample, and quickly tap the key/button on your MIDI controller, does changing the Release impact how long it takes to fade out/stop playing?Dr.Gunjah wrote: ↑Sat May 25, 2024 6:06 pm Yeah, I'm using the amp env above the filter env in the top right corner, on the left side is the mapping section and below is a wave form display with the amp env curve drawn on it. When I turn the other knobs, like attack, hold, etc. the curve changes, but release doesn't.
edit: ah yeah screenshots now, yes I'm using the env in the red box
If it's just about the visual curve, then this is normal behaviour for many samplers, as the curve shows the amplitude of the sample playback from the sample's start position and end position, which is determined with ADS, and the Release is based on how long the key is pressed or how long the MIDI note data is.
If changing the Release makes no difference in playback (e.g. at 0 or 100, playing a super short note with a long sample makes no difference), then something else is going on. Keep in mind that this may be hard to tell with very short samples.
If I'm misunderstanding or telling you things you already know then my apologies.
-
- KVRian
- 512 posts since 27 Oct, 2004
That is nice! Unfortunately it doesn't work correctly yet. For instance, it ignores fades and reversing the sample. So it still doesn't reflect visually how the pad sounds.
-
- KVRian
- 655 posts since 20 Jun, 2010
All good mate, I'm new to this plugin and it's exactly what you're describing. I've probably been overthinking because I couldn't see a visual representation on the curve.concealed identity wrote: ↑Sat May 25, 2024 9:02 pm Just to confirm, are you saying that editing the Release doesn't change the curve visually, or that it doesn't change the curve visually AND it has no effect when playing? If you load in a long sample, and quickly tap the key/button on your MIDI controller, does changing the Release impact how long it takes to fade out/stop playing?
If it's just about the visual curve, then this is normal behaviour for many samplers, as the curve shows the amplitude of the sample playback from the sample's start position and end position, which is determined with ADS, and the Release is based on how long the key is pressed or how long the MIDI note data is.
If changing the Release makes no difference in playback (e.g. at 0 or 100, playing a super short note with a long sample makes no difference), then something else is going on. Keep in mind that this may be hard to tell with very short samples.
If I'm misunderstanding or telling you things you already know then my apologies.
Thank you and everyone who tried to help!
![Thumbs Up! :tu:](./images/smilies/icon_thumbsup.gif)
-
- KVRer
- 29 posts since 29 Aug, 2007
Afaik, the pad's waveform-images are calculated while loading the plugin or samples.
So, it can't reflect any changing to the actual sound after loading. Keeping that in mind, this little display can not be really used as exact representation. I see it rather as a kind of "table of contents" of the pad.
To reflect the Pad's actual sound to any time TAL had to rewrite the whole mechanism of that display, i'm afraid...
-
- KVRer
- 29 posts since 29 Aug, 2007
About the amp-release topic, anyone has an opinion about having release a little opened by default?
When i use amp env, i open release vitually every time. If only to prevent clicky or harsh break noises. Especially by using a section looped.
In one-shot mode which is by default, the release value doesn't matter at all. So would be an other value no problem as well.
What do you think?
When i use amp env, i open release vitually every time. If only to prevent clicky or harsh break noises. Especially by using a section looped.
In one-shot mode which is by default, the release value doesn't matter at all. So would be an other value no problem as well.
What do you think?
-
neverbeeninariot neverbeeninariot https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=350084
- KVRian
- Topic Starter
- 971 posts since 3 Feb, 2015 from UK
You wait hours for a bus....
Version 2.5.9 / 25.06.2024
* Pad-preset files do not load when set to default fixed.
* Clear EQ settings when reset pad fixed.
Version 2.5.8 / 24.06.2024
* Pad-preset files also using relative paths for samples.
Version 2.5.7 / 14.06.2024
* The pad name is highlighted in sample preview mode.
* Minor fixes
Version 2.5.9 / 25.06.2024
* Pad-preset files do not load when set to default fixed.
* Clear EQ settings when reset pad fixed.
Version 2.5.8 / 24.06.2024
* Pad-preset files also using relative paths for samples.
Version 2.5.7 / 14.06.2024
* The pad name is highlighted in sample preview mode.
* Minor fixes
-
- KVRer
- 29 posts since 29 Aug, 2007
...just a few days later, double update day...
Version 2.6.1 / 01.07.2024
Drag and drop audio export did not work in some situations fixed.
Slice editor does not reset zoom when double click.
Version 2.6.0 / 01.07.2024
Possible problems with pitch- and mod-wheel MIDI offline rendering fixed.
Version 2.6.1 / 01.07.2024
Drag and drop audio export did not work in some situations fixed.
Slice editor does not reset zoom when double click.
Version 2.6.0 / 01.07.2024
Possible problems with pitch- and mod-wheel MIDI offline rendering fixed.