DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.1)

[moss]

Is it now possible to link the last clicked parameter with a CC in the Generic Flexi? Or with mouse hover?

Yes.

[Dirkitator]

Is it now possible to link the last clicked parameter with a CC in the Generic Flexi? Or with mouse hover?

Yes.

Hi Jürgen,

das ist super! Leider bin ich irgendwie zu blind das in deiner Bedienungsanleitung zu finden. Kannst du mir bitte noch einen Hinweis geben, wo ich Informationen darüber bekomme. Das wäre super nett von dir.


that's great! Unfortunately, I am somehow too blind to find this in your operating instructions. Can you please give me a hint where I can get information about it. That would be super nice of you.

[moss]

Is it now possible to link the last clicked parameter with a CC in the Generic Flexi? Or with mouse hover?

Yes.

Hi Jürgen,

das ist super! Leider bin ich irgendwie zu blind das in deiner Bedienungsanleitung zu finden. Kannst du mir bitte noch einen Hinweis geben, wo ich Informationen darüber bekomme. Das wäre super nett von dir.


that's great! Unfortunately, I am somehow too blind to find this in your operating instructions. Can you please give me a hint where I can get information about it. That would be super nice of you.

Watch this:

[Dirkitator]

Toll! Ich habe es nun gefunden.

Leider habe ich mir den Launch Control XL mk3 von Novation gekauft. So wie es aussieht hat Novation den Controler zu früh auf den Markt gebracht. Er hat nämlich zur Zeit nur absolute Encoder. Man kann diese nicht in den relativen Modus ändern. Ich hoffe sehr, dass dies bald von Novation geändert wird.

@moss: Wirst du für den LCXLmk3 ein Skript schreiben sobald das Gerät Encoder im relativen Modus bietet?
Das Skript von Novation ist soweit ganz gut, aber deine Umsetzungen für die Controller sind besser.

Great! I have now found it.

Unfortunately, I bought the Launch Control XL mk3 from Novation. It looks like Novation brought the controller onto the market too early. It currently only has absolute encoders. You can't change them to relative mode. I really hope that Novation will change this soon.

@moss: Wirst du für den LCXLmk3 ein Skript schreiben sobald das Gerät Encoder im relativen Modus bietet?
Das Skript von Novation ist soweit ganz gut, aber deine Umsetzungen für die Controller sind besser.

[moss]

Toll! Ich habe es nun gefunden.

Leider habe ich mir den Launch Control XL mk3 von Novation gekauft. So wie es aussieht hat Novation den Controler zu früh auf den Markt gebracht. Er hat nämlich zur Zeit nur absolute Encoder. Man kann diese nicht in den relativen Modus ändern. Ich hoffe sehr, dass dies bald von Novation geändert wird.

@moss: Wirst du für den LCXLmk3 ein Skript schreiben sobald das Gerät Encoder im relativen Modus bietet?
Das Skript von Novation ist soweit ganz gut, aber deine Umsetzungen für die Controller sind besser.

Great! I have now found it.

Unfortunately, I bought the Launch Control XL mk3 from Novation. It looks like Novation brought the controller onto the market too early. It currently only has absolute encoders. You can't change them to relative mode. I really hope that Novation will change this soon.

@moss: Wirst du für den LCXLmk3 ein Skript schreiben sobald das Gerät Encoder im relativen Modus bietet?
Das Skript von Novation ist soweit ganz gut, aber deine Umsetzungen für die Controller sind besser.

I have currently no plans for the Mk3.

[stevetekk12]

Hi,
I have Behringer X-Touch MINI. I am trying to get it working as a Mackie Control. I see we have X-Touch but not MINI. I understand the trouble you must take to add controllers so I asked AI to modify the extension. However that is as far as my knowledge goes and I do not have Java Tool Kit etc to recompile. I was wondering would it be possible to add this controller to Mackie Control please?

Thank you kindly
Stephen

[moss]

Hi,
I have Behringer X-Touch MINI. I am trying to get it working as a Mackie Control. I see we have X-Touch but not MINI. I understand the trouble you must take to add controllers so I asked AI to modify the extension. However that is as far as my knowledge goes and I do not have Java Tool Kit etc to recompile. I was wondering would it be possible to add this controller to Mackie Control please?

Thank you kindly
Stephen

The MCU protocol is a generic protocol, which means it works with the MINI as well. DrivenByMoss MCU implementation gives you several options to tweak it to your device, see the manual for detailed explanations.

[daymaro]

Hi Moss, hope you are doing well.
I Have a Maschine MK2 on win 11 having trouble getting it to work on Bitwig 5.2.
I downloaded DrivenByMoss 25.0.1, and copied the extension to the extensions folder.
When I opened Bitwig It recognized the controller right away.
But Only few buttons actually do things like left and right arrow, and ''Enter''. but like the knobs and play and rec don't do anything.
Is there anything I'm missing here? please help.

[moss]

Hi Moss, hope you are doing well.
I Have a Maschine MK2 on win 11 having trouble getting it to work on Bitwig 5.2.
I downloaded DrivenByMoss 25.0.1, and copied the extension to the extensions folder.
When I opened Bitwig It recognized the controller right away.
But Only few buttons actually do things like left and right arrow, and ''Enter''. but like the knobs and play and rec don't do anything.
Is there anything I'm missing here? please help.

Make sure you did install the template. See the DrivenByMoss manual for detailed installation instructions.

[_TIP_]

Hi Moss, I bought a second hand Maschine MKII on ebay after watching your videos and I couldn't be happier with all the functionality, one thing I would really love to have though is chord mode, is there a possibility to add any possible combination to get in chord mode (it doesn't have to be a convenient combination, anything would be so welcome). Thank you for your hard work, I really appreciate it!!!

[Bobby L'Avenir]

Hi Moss, is it possible to lock the shift button to do fine control on the 8 rotary knobs without two hands being needed to hold the shift button down? Many thanks

Sorry, no. But you could decrease the normal speed in the settings.

Thanks Moss, such an amazing script you've made here pal
I wish you could do something for the Nektar Panorama keyboards, that would be dope

[moss]

Hi Moss, I bought a second hand Maschine MKII on ebay after watching your videos and I couldn't be happier with all the functionality, one thing I would really love to have though is chord mode, is there a possibility to add any possible combination to get in chord mode (it doesn't have to be a convenient combination, anything would be so welcome). Thank you for your hard work, I really appreciate it!!!

I had no real idea. Just make a suggestion.

[moss]

Hi Moss, is it possible to lock the shift button to do fine control on the 8 rotary knobs without two hands being needed to hold the shift button down? Many thanks

Sorry, no. But you could decrease the normal speed in the settings.

Thanks Moss, such an amazing script you've made here pal
I wish you could do something for the Nektar Panorama keyboards, that would be dope

Nektar is pretty good at making their own scripts. So, no, won't happen from my side.

[xtreme sounds]

HI definately running into an issue with the shift button on the akai fire. it seems to lock into a shift mode somehow and turning the select knob will only change the octave. changing notes and scales stopped working during a session. I tried unplugging the fire and pluggin it back in and still no change. Pressing Alt also stopped responding. it just changed track selection. Fire also displays select a drum pad on the display constantly. And other text overlayed over it as I turned the knobs. I was working with the drum sequencer on one track then switched to another track to play notes in using the normal sequencer and everything went wonky out of nowhere. I think I entered note edit mode on the drum sequencer and then exited or switched tracks while still in that mode or something. Very undesirable result here. The only other thing i changed during the session was the velocity pad settings. I toggled a set velocity OFF then ON again and changed the constant value. Trying to figure out what broke the fire script in session.

[Alexander137]

I don't understand something: I can't control different devices using a midi keyboard separately from each other. If I have 2 tracks and I bind the first encoder to the parameter of the first synthesizer and the first encoder to the parameter of the second synthesizer - then no matter which track I select, when I turn the encoder, both bound parameters change synchronously.

How can I avoid this?

I bind it via the right mouse button "map to controller or key". (novation launchkey 25, if it matters)