KVR Audio

vurt · Post by **vurt** » Mon Sep 29, 2025 1:05 pm

i should correct my info on the proteus, it's a looping sequencer not recorder, still getting one at some point, as it did interesting things, id at least like to see how much further it can go, as it had some many free jack ins/outs, and i was only tweaking a couple of parameters and already getting nice results.

ghettosynth · Post by **ghettosynth** » Mon Sep 29, 2025 6:17 pm

As my year in DIY finally starts to get under way, well, most likely it will not be fully under way until year's end, I'm not sure that my life can be complete without the infusion of wisdom that I'm quite sure that this module will provide. Steiner Parker quirks in a phaser, yes please!

Constructed Identity · Mon Sep 29, 2025 7:15 pm

Watched a video on 1010 Music Bento and it looks pretty slick, marketing says it replaces a laptop in live performances, I kinda doubt that, but if it can play on one channel while looping on one or two other channels it would be nice to have.

ghettosynth · Post by **ghettosynth** » Mon Sep 29, 2025 7:57 pm

Oh UDO, I was just settling in to a long winter's suppression of the GASsy bloat and then this.

vurt · Post by **vurt** » Mon Sep 29, 2025 7:58 pm

Constructed Identity wrote: Mon Sep 29, 2025 7:15 pm Watched a video on 1010 Music Bento and it looks pretty slick, marketing says it replaces a laptop in live performances, I kinda doubt that, but if it can play on one channel while looping on one or two other channels it would be nice to have.

i was playing with the enner, through a cosmos on saturday, im quite tempted by the enner now! theyre like a match made in heaven!

Constructed Identity · Mon Sep 29, 2025 11:01 pm

vurt wrote: Mon Sep 29, 2025 7:58 pm
Constructed Identity wrote: Mon Sep 29, 2025 7:15 pm Watched a video on 1010 Music Bento and it looks pretty slick, marketing says it replaces a laptop in live performances, I kinda doubt that, but if it can play on one channel while looping on one or two other channels it would be nice to have.
i was playing with the enner, through a cosmos on saturday, im quite tempted by the enner now! theyre like a match made in heaven!

Oh, I am sure you would love playing these two! I made a noise track adding to a recording I made on the combination and all I could think of was: 'now I'm getting into vurt territory'

thecontrolcentre · Post by **thecontrolcentre** » Wed Oct 01, 2025 1:24 pm

My latest purchase just arrived ...

20251001_135556.jpg

20251001_135622.jpg

20251001_140141.jpg

Good, solid build (similar to PUSH). Heavier than I expected.
Arrived charged and ready to go. Time to dig into the manual.

elxsound · Post by **elxsound** » Wed Oct 01, 2025 4:49 pm

thecontrolcentre wrote: Wed Oct 01, 2025 1:24 pm My latest purchase just arrived ...

20251001_135556.jpg

20251001_135622.jpg

20251001_140141.jpg

Good, solid build (similar to PUSH). Heavier than I expected.
Arrived charged and ready to go. Time to dig into the manual.

Super fun for quick sampling and the mic is useful. Congrats on the pick-up!

elxsound · Post by **elxsound** » Wed Oct 01, 2025 4:56 pm

Well, I didn't hold out long and ordered both Polimaths and QXG.

The backend connections got me, though now as I'm typing... I'll need to find a spot where they can exist side-by-side. Oh, damn. Case reorg time.

vurt · Post by **vurt** » Wed Oct 01, 2025 4:59 pm

elxsound wrote: Wed Oct 01, 2025 4:56 pm Well, I didn't hold out long and ordered both Polimaths and QXG.

The backend connections got me, though now as I'm typing... I'll need to find a spot where they can exist side-by-side. Oh, damn. Case reorg time.

havent looked at the manual, but are they extra cable connections or over busboard?

justin3am · Post by **justin3am** » Wed Oct 01, 2025 5:07 pm

Dude, I must be cured of GAS... not interested in new Make Noise or new Roland drum machine at all.
That UDO DMNO looks rad, love the VFD look of the display. Still not really tempted.

I feel like I've got so much time invested in the stuff I already use, I'm starting to be annoyed by the idea of spending the time it'll take to learn new gear.

elxsound · Post by **elxsound** » Wed Oct 01, 2025 5:09 pm

vurt wrote: Wed Oct 01, 2025 4:59 pm
elxsound wrote: Wed Oct 01, 2025 4:56 pm Well, I didn't hold out long and ordered both Polimaths and QXG.

The backend connections got me, though now as I'm typing... I'll need to find a spot where they can exist side-by-side. Oh, damn. Case reorg time.
havent looked at the manual, but are they extra cable connections or over busboard?

In the video, they had said connected by cable in the back. I think I need to ask them about the length of what I'm assuming is in an included cable. I'm wondering how much freedom I have to move around, vs buying a separate cable.

Then there's mention of "When a $&%*#^!@ is also pre-patched to the QXGs’ signal inputs the collection of modules comprises the eight channel core of the New Universal Synthesizer System."

So that'll be a thing to consider too

Screenshot 2025-10-01 at 1.07.00 PM.png

cryophonik · Post by **cryophonik** » Wed Oct 01, 2025 5:13 pm

justin3am wrote: Wed Oct 01, 2025 5:07 pm Dude, I must be cured of GAS... not interested in new Make Noise or new Roland drum machine at all.

Reported

WatchTheGuitar · Post by **WatchTheGuitar** » Wed Oct 01, 2025 5:17 pm

justin3am wrote: Wed Oct 01, 2025 5:07 pm Dude, I must be cured of GAS... not interested in new Make Noise or new Roland drum machine at all.

Any GAS I had for the TR-1000 evaporatored the second they uttered the words “two thousand”. Mental.

2025: A Year in Gear (What You've Bought or Want to Buy in 2025)