Zebra 3 Beta Bug Reports
-
mindlessgenius mindlessgenius https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=761836
- KVRer
- 18 posts since 7 Aug, 2025
Graphical Linux bug: Right-click menus stay on top of everything when changing windows under GNOME Wayland (only tested with REAPER now, will report back if it's any different in Ardour).
-
- KVRist
- 116 posts since 9 Jun, 2024
Editor bug: move a point into the vertical borderlines causes other points on the borderlines to disappear.
You do not have the required permissions to view the files attached to this post.
-
tasmaniandevil tasmaniandevil https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=62450
- KVRAF
- 2170 posts since 22 Mar, 2005 from a planet called u-he
-
- u-he
- Topic Starter
- 30186 posts since 8 Aug, 2002 from Berlin
That's on purpose.loctune wrote: Mon Mar 23, 2026 4:43 am Editor bug: move a point into the vertical borderlines causes other points on the borderlines to disappear.
The first point and the last point already form a line. It can be made visible either on the front or the back, using the "Close Shape" options at the bottom of the toolbox.
So because there is a line already, the point that is disappearing gets removed because it is on that line. The editor automatically removes excess vertical points as they won't be audible - the curve will jump from the first point of the vertical line to the last.
-
- KVRian
- 1044 posts since 17 Mar, 2005 from Bay Area
Macro knobs retain their position from preset to preset - is this intentional? I just noticed it.
Sounds are altered. (it isnt just knob position)
Sounds are altered. (it isnt just knob position)
-
tasmaniandevil tasmaniandevil https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=62450
- KVRAF
- 2170 posts since 22 Mar, 2005 from a planet called u-he
This will change in the final version. We’ll reset MIDI controllers on preset change.Milkman wrote: Wed Mar 25, 2026 7:20 am Macro knobs retain their position from preset to preset - is this intentional? I just noticed it.
Sounds are altered. (it isnt just knob position)
That QA guy from planet u-he.
-
- KVRian
- 1044 posts since 17 Mar, 2005 from Bay Area
Thanks for the reply on this! Cool. Cant wait for final version!! Thanks for your support.tasmaniandevil wrote: Wed Mar 25, 2026 8:33 amThis will change in the final version. We’ll reset MIDI controllers on preset change.Milkman wrote: Wed Mar 25, 2026 7:20 am Macro knobs retain their position from preset to preset - is this intentional? I just noticed it.
Sounds are altered. (it isnt just knob position)
-
- KVRist
- 38 posts since 1 Jul, 2017
Nevermind this comment, not a bug.
-
- KVRist
- 31 posts since 2 Apr, 2007
First of all: thank you u-he team for the fantastic plugin. I've been enjoying the beta versions a lot, the past two months or so. 
Yesterday I ran into a freeze issue that is quite reproducible. My friend and I were exploring the Curve Editor, on our two individual Macbooks (M-series), using Ableton Live 12. I used Zebra 3 Rev 20977 AU.
Our question was: how to shift the phase of the waveform. We found the Rotate tool to do so, but every time after playing around with it a bit – by dragging Points left and right – the endless beach ball appears and Activity Monitor says "Not Responding". Audio keeps playing.
As for reproducing the issue: it takes about 30 seconds of using the tool to trigger a freeze. Perhaps combined with switching windows / playing midi notes / having the transport control set to play.
I was also wondering if this bug could be related to not being able to drag (phase rotate) the waveform from the most left and right points. It would feel intuitive to me, and in this Beta the mouse cursor already changes to the Rotate tool when hovering over the outer points.
Cheers,
Rutger
Yesterday I ran into a freeze issue that is quite reproducible. My friend and I were exploring the Curve Editor, on our two individual Macbooks (M-series), using Ableton Live 12. I used Zebra 3 Rev 20977 AU.
Our question was: how to shift the phase of the waveform. We found the Rotate tool to do so, but every time after playing around with it a bit – by dragging Points left and right – the endless beach ball appears and Activity Monitor says "Not Responding". Audio keeps playing.
As for reproducing the issue: it takes about 30 seconds of using the tool to trigger a freeze. Perhaps combined with switching windows / playing midi notes / having the transport control set to play.
I was also wondering if this bug could be related to not being able to drag (phase rotate) the waveform from the most left and right points. It would feel intuitive to me, and in this Beta the mouse cursor already changes to the Rotate tool when hovering over the outer points.
Cheers,
Rutger
-
- KVRer
- 9 posts since 21 Apr, 2015
On Linux, switching to the init patch swaps many parameters from the previous patch.
-
tasmaniandevil tasmaniandevil https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=62450
- KVRAF
- 2170 posts since 22 Mar, 2005 from a planet called u-he
Are you using Bitwig and Zebra's CLAP version? In this case, this is a bug in Bitwig, not in our plugin. It's caused by the Undo/Redo system they introduced with Bitwig 5.3. Please contact Bitwig about this.Indanautilus wrote: Sun Mar 29, 2026 9:34 pm On Linux, switching to the init patch swaps many parameters from the previous patch.
That QA guy from planet u-he.
-
- KVRer
- 9 posts since 21 Apr, 2015
Ah, yes! Thanks for pointing that out. In Reaper, initializing Zebra works as expected.
-
tasmaniandevil tasmaniandevil https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=62450
- KVRAF
- 2170 posts since 22 Mar, 2005 from a planet called u-he
Thanks for reporting. Can confirm.rutgermuller wrote: Sat Mar 28, 2026 9:53 am As for reproducing the issue: it takes about 30 seconds of using the tool to trigger a freeze. Perhaps combined with switching windows / playing midi notes / having the transport control set to play.
That QA guy from planet u-he.
-
- KVRist
- 31 posts since 2 Apr, 2007
Welcometasmaniandevil wrote: Mon Mar 30, 2026 10:06 amThanks for reporting. Can confirm.rutgermuller wrote: Sat Mar 28, 2026 9:53 am As for reproducing the issue: it takes about 30 seconds of using the tool to trigger a freeze. Perhaps combined with switching windows / playing midi notes / having the transport control set to play.
-
- KVRer
- 1 posts since 4 Dec, 2004 from Denmark
Intel MacPro, macOS Sonoma 14.8.3, Fender Studio Pro 8.x.x, VST3 version
I get DAW crashes when browsing presets. Seems sort of random, but rather consistent. I can go through 3-4, maybe 5 presets just fine, and then suddenly, the next one will crash the program (suing the Next preset arrow). Doesn't seem to be a pattern or tied to specific presets.
I get DAW crashes when browsing presets. Seems sort of random, but rather consistent. I can go through 3-4, maybe 5 presets just fine, and then suddenly, the next one will crash the program (suing the Next preset arrow). Doesn't seem to be a pattern or tied to specific presets.
Stef 