DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.2)

[Tj Shredder]

Hi, I have a problem with the Mackie script which should work with a Behringer XTouch One. As I have other faders for all the channels (Console 1), I just want it to control my Master Fader. I switch on Master on the device, and it actually does control the Master fader in Bitwig, but after a second or so, the motor fader on the device jumps back to zero. It should stay in the position of the master in Bitwig. Also moving the master in Bitwig does not move the fader of the device.
I wonder what I am doing wrong...
Is there a secret setting I am overlooking?
I am on Mac Sequoia and latest Bitwig 6...

[moss]

Hi, I have a problem with the Mackie script which should work with a Behringer XTouch One. As I have other faders for all the channels (Console 1), I just want it to control my Master Fader. I switch on Master on the device, and it actually does control the Master fader in Bitwig, but after a second or so, the motor fader on the device jumps back to zero. It should stay in the position of the master in Bitwig. Also moving the master in Bitwig does not move the fader of the device.
I wonder what I am doing wrong...
Is there a secret setting I am overlooking?
I am on Mac Sequoia and latest Bitwig 6...

These 1-channel devices misuse MCU and it is not surprising to get such effects.
Make sure that you activate it by pressing the MASTER button on the X-Touch One and not by selecting the Master-track and pinning it.
If you select it and have not activated "include effect and master track" in the settings it will go to 0 and show "Select Bank" in the display (so it is a good idea to have this activated).

[TheWhistler]

Hello Jürgen,
may I please ask for your help again?
I guess it may not be possible, but wanted to ask as I did not find anything in the manual.
Changing the clip grid by one row (one scene) or one track is no intended feature of the APC mini MK2 script of DbM?
I am asking because it is possible in the native adaption for this very controller, but obsiously not in the DbM.
As I want to put all my clips in one project for a whole live performance, I would really like to fine tune what is accessible in the clip launcher.
Moving in steps of 8 destroys my intended workflow as it is way to coarse.
Maybe I am missing something, though. (I wish it would like that, because I really like all the other features in the DbM-extension)
Thank you very much an hope are in a cool place.
Does anyone remember the song by a band calles "Third World". The song is called "96° degrees in the shade".
It is way hotter than that in germany atm.

[moss]

Hello Jürgen,
may I please ask for your help again?
I guess it may not be possible, but wanted to ask as I did not find anything in the manual.
Changing the clip grid by one row (one scene) or one track is no intended feature of the APC mini MK2 script of DbM?
I am asking because it is possible in the native adaption for this very controller, but obsiously not in the DbM.
As I want to put all my clips in one project for a whole live performance, I would really like to fine tune what is accessible in the clip launcher.
Moving in steps of 8 destroys my intended workflow as it is way to coarse.
Maybe I am missing something, though. (I wish it would like that, because I really like all the other features in the DbM-extension)
Thank you very much an hope are in a cool place.
Does anyone remember the song by a band calles "Third World". The song is called "96° degrees in the shade".
It is way hotter than that in germany atm.

Sorry, it is currently only by 8. I ran out of button combinations with that one.

[TheWhistler]

Ok, understand. I keep the Generic-Flexi for it´s uncomparable felxibillity and will use the standard adaption by Bitwig.
Thank´s for confirming it is not possible.

[ylemsudd]

Hello Jürgen @moss,

first of all i have to thank you for all your efforts and doing this for us!
I have a question regarding generic flexi. It would be so great if you could assign a controller to a specific track remote of a specific track. As i understand it, right now it is only possible to assign control over track remote parameters 1 to 8 of the selected track. Being able to assign a controller knob to control track remote 2 of track 3 for example. Is it already possible somehow and i didnt get it? Or do you think its possible of thinking about implementing that?

All the best from me!

[moss]

Hello Jürgen @moss,

first of all i have to thank you for all your efforts and doing this for us!
I have a question regarding generic flexi. It would be so great if you could assign a controller to a specific track remote of a specific track. As i understand it, right now it is only possible to assign control over track remote parameters 1 to 8 of the selected track. Being able to assign a controller knob to control track remote 2 of track 3 for example. Is it already possible somehow and i didnt get it? Or do you think its possible of thinking about implementing that?

All the best from me!

It is already there. Look for "Track Remotes" (above "Transport").

[ylemsudd]

Hello Jürgen,

Thanks for coming back so quickly. I found the option already. So far I only managed to map an encoder to control the track remote parameters of the currently selected track. I’m missing the option to map „Track X Remote Parameter Y“ like it’s possible to map a specific send from a specific track to a knob. I hope I’m not missing anything and that I was able to make clear what I mean.

All the best

[moss]

Hello Jürgen,

Thanks for coming back so quickly. I found the option already. So far I only managed to map an encoder to control the track remote parameters of the currently selected track. I’m missing the option to map „Track X Remote Parameter Y“ like it’s possible to map a specific send from a specific track to a knob. I hope I’m not missing anything and that I was able to make clear what I mean.

All the best

Sorry, I do not understand what you are after. Track remote are exactly that. You can assign any parameter from any plugin on a track to its track remotes.

[ylemsudd]

My bad, sorry. What I mean is the following: In the selected slot functions, where you can assign track remote parameters 1 - 8 to your selected slot, it is currently not possible to select the track remotes of a certain audio or midi track. You can select the function "Track Remotes: Set Parameter 1" but not the function "Track 1 Track Remotes: Set Parameter 1" or "Track 3 Track Remote: Set Parameter 2" for example. To control the track remotes with your controller you would have to select the track which track remotes you want to control first. If you for example have a controller with a classic mixer layout with a fader and some knobs per channel it would be super great to map one of the channels knobs to the specific channels track remotes for every following channel. Let me elaborate on the Send example: In the slot functions for tracks you can select "Track 1 Set Send 3" and not only "Set Send 3" (of the currently selected track). My idea or question was to make this selectability of track numbers also available also for track remotes.

I hope this helps to understand. If not just disregard this and be sure of my gratitude for what you do for the community.
All the best!

[moss]

My bad, sorry. What I mean is the following: In the selected slot functions, where you can assign track remote parameters 1 - 8 to your selected slot, it is currently not possible to select the track remotes of a certain audio or midi track. You can select the function "Track Remotes: Set Parameter 1" but not the function "Track 1 Track Remotes: Set Parameter 1" or "Track 3 Track Remote: Set Parameter 2" for example. To control the track remotes with your controller you would have to select the track which track remotes you want to control first. If you for example have a controller with a classic mixer layout with a fader and some knobs per channel it would be super great to map one of the channels knobs to the specific channels track remotes for every following channel. Let me elaborate on the Send example: In the slot functions for tracks you can select "Track 1 Set Send 3" and not only "Set Send 3" (of the currently selected track). My idea or question was to make this selectability of track numbers also available also for track remotes.

I hope this helps to understand. If not just disregard this and be sure of my gratitude for what you do for the community.
All the best!

Ah, I see. No, that is currently not possible. Would be a bit excessive with 64 parameters and the related navigation options for all tracks. Also remember that you still have the Project remotes as well.