Ableton Live 11
-
WatchTheGuitar WatchTheGuitar https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=440193
- KVRAF
- 12966 posts since 30 Apr, 2019
wah you made me click a link about Push wah! wah!
- KVRAF
- 2857 posts since 8 Jun, 2018
- KVRAF
- 2857 posts since 8 Jun, 2018
some of the M4L devices are based on Mutable Instruments, other seems to 'wrap' them, so, they are ports. others are, i repeat based on.. one or two are original.
but for the prices;
https://gumroad.com/delirios?sort=page_layout
but for the prices;
https://gumroad.com/delirios?sort=page_layout
Primoridal Music: sadà\exposadà - Indusrial & Expanding Your Mind Hurts: Sound Brut
-
- KVRAF
- 11289 posts since 2 Dec, 2004 from North Wales
Wow- that's some really good stuff- I have a lot of those modules in hardware (Tides, Plaits, Clouds) so it will be interesting to play with them...and it will cost me a lot less than buying the hardware did!WasteLand wrote: ↑Fri Jun 18, 2021 8:02 am some of the M4L devices are based on Mutable Instruments, other seems to 'wrap' them, so, it seems the source code is used for most. others are, i repeat based on..
but for the prices;
https://gumroad.com/delirios?sort=page_layout
Really cool to see some of the parasites firmware ported over (that the one I use in Clouds) and also VCV modules ported as MAX!
Will try a few of these this weekend, thanks for the link--- I had a quick look and I cant see a MAX 8 thread on KVR...I know MAX has its own forum, but it would be really cool to even have a MAX forum on KVR (M4L, new modules, learning MAX etc), I have found some amazing new stuff just from this thread!
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 11289 posts since 2 Dec, 2004 from North Wales
I am hoping Ableton implement this to get full use of the screen, its so bloody obvious it needs doing!WasteLand wrote: ↑Thu Jun 17, 2021 2:14 pm this seems quite promissing, for arrangment mode
https://gumroad.com/valiumdupeuple#KUTUz
€6,66 (+VAT when VAT is needed..)
an update for live 11 will come, but it will work of course, the update for live 11 will include new options, i guess, special to v11..
I would much rather the used the buttons and knobs more so they can be labelled (I can never remember what unlabelled pads do!) and just use the pads for moving around and selection
That volume and pitch tool is the timeline is cool as well, again- Ableton!!?
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
- KVRAF
- 2857 posts since 8 Jun, 2018
yes, also one or two VCV modules! and nice ports from MI. nice to have them also in ableton, native...SLiC wrote: ↑Fri Jun 18, 2021 8:16 amWow- that's some really good stuff- I have a lot of those modules in hardware (Tides, Plaits, Clouds) so it will be interesting to play with them...and it will cost me a lot less than buying the hardware did!WasteLand wrote: ↑Fri Jun 18, 2021 8:02 am some of the M4L devices are based on Mutable Instruments, other seems to 'wrap' them, so, it seems the source code is used for most. others are, i repeat based on..
but for the prices;
https://gumroad.com/delirios?sort=page_layout
Really cool to see some of the parasites firmware ported over (that the one I use in Clouds) and also VCV modules ported as MAX!
Will try a few of these this weekend, thanks for the link--- I had a quick look and I cant see a MAX 8 thread on KVR...I know MAX has its own forum, but it would be really cool to even have a MAX forum on KVR (M4L, new modules, learning MAX etc), I have found some amazing new stuff just from this thread!
yes indeed a version, variant on Clouds. me like.
i get my info via Facebook, yes... Max For Live Users, a lot of developers, or a lot... and users of course, that share links... it is indeed a goldmine...
so i port my info to this thread...
there is a M4L thread here, also got me something, but it isn't that a-live...
an update by the way for live 11, will come or not.. but it works of course for live 11, all the things you can do, i believe, in live 10.SLiC wrote: ↑Fri Jun 18, 2021 8:23 amI am hoping Ableton implement this to get full use of the screen, its so bloody obvious it needs doing!WasteLand wrote: ↑Thu Jun 17, 2021 2:14 pm this seems quite promissing, for arrangment mode
https://gumroad.com/valiumdupeuple#KUTUz
€6,66 (+VAT when VAT is needed..)
an update for live 11 will come, but it will work of course, the update for live 11 will include new options, i guess, special to v11..
I would much rather the used the buttons and knobs more so they can be labelled (I can never remember what unlabelled pads do!) and just use the pads for moving around and selection
That volume and pitch tool is the timeline is cool as well, again- Ableton!!?
and indeed! why doesn't Ableton does this. it can be done!!!! with the screen, look at Maschine MK3.... like it how they did that for Maschine MK3 (and Maschine+, i only have Maschine Mk3 + Jam...).
i didn't tried it yet, because only next week i am able to work in ableton (why? able - ableton...), then i will buy this one, the ports....
why can't ableton be not more able, to integrate more in the Push 2. it is all there, get a programmer...
but i work mostly in session view. of course an arrangment will be made.. and indeed, Push 2, only for the mix, and does it represent audio tracks?? in arrangment mode.
(and it does not have even stop/forward/rew/pause.... o well... still use the Push 2 a lot, when i am working with live 11 suite).
and make SIMPLER simple MPE!!
Primoridal Music: sadà\exposadà - Indusrial & Expanding Your Mind Hurts: Sound Brut
-
- KVRAF
- 11289 posts since 2 Dec, 2004 from North Wales
This one is a ton of fun and totally free (although tempting me to buy the full pack )
beautifully implemented control and display on PUSH 2, It really is like using a new hardware toy (also works with most launchpads...)
https://isotonikstudios.com/product/pong-deluxe/
Series of fun sequencers...
https://youtu.be/1S0C-GMR0u0
beautifully implemented control and display on PUSH 2, It really is like using a new hardware toy (also works with most launchpads...)
https://isotonikstudios.com/product/pong-deluxe/
Series of fun sequencers...
https://youtu.be/1S0C-GMR0u0
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRist
- 33 posts since 12 Apr, 2021
I love experimental music but that just sounds terrible to me.. I could cook up similar sounds in literally 2 mins in Bitwig so why is it interesting even if it is free?
-
- KVRAF
- 5123 posts since 30 May, 2006 from Hollow Earth
-
- KVRAF
- 11289 posts since 2 Dec, 2004 from North Wales
Bitwig has the granular mode in sampler which is very cool but quite limited until you start messing with it in the grid and with modulators, using Lives native Granular 2 is often easier and lovely mapping and perfect with PUSH.
https://youtu.be/5Jksh1CgkSA
Vector Grain is also free and native with Live...one of my faveroute MIDI instrument, is a granular looper. ..someone may be able to make this in Bitwig, I couldn't!
https://youtu.be/rCUvwHNjF_I
https://youtu.be/5Jksh1CgkSA
Vector Grain is also free and native with Live...one of my faveroute MIDI instrument, is a granular looper. ..someone may be able to make this in Bitwig, I couldn't!
https://youtu.be/rCUvwHNjF_I
Last edited by SLiC on Sun Jun 20, 2021 10:08 am, edited 4 times in total.
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
-
- KVRAF
- 3061 posts since 6 Nov, 2006
nice mangler. thanks for the link. stretchy hipno toad sounds and whatever source dependent discoveries that might be stumbled upon
- KVRist
- 413 posts since 29 Apr, 2019
Will admit that Live's M4L granular stuff is really good for mangling sounds while Bitwig kinda touches the surface. Even Grain from Reason is better granular synthesis than bitwig's stock devices
-
- KVRAF
- 11289 posts since 2 Dec, 2004 from North Wales
Yes, there is a lot of granular and left field stuff in Live now, a lot was introduced with the new 'inspired by nature' packs in Live 11. Reason also has some great instruments, although if I could have anything from Reason it would be the pitch correction and quantise...editing audio like midi.
Now Live and Bitwig both have comping, they both need this to be 'complete' in my opinion. Every other DAW can do this...Logic, Cubase, Studio One, Reaper, Reason and even FL Studio...I hope Ableton have this as a next priority and I hope it just shows up on the midi grid like Reason.
https://youtu.be/JBc2uFMz6n4
X32 Desk, i9 PC, S49MK2, Studio One, BWS, Live 12. PUSH 3 SA, Osmose, Summit, Pro 3, Prophet8, Syntakt, Digitone, Drumlogue, OP1-F, Eurorack, TD27 Drums, Nord Drum3P, Guitars, Basses, Amps and of course lots of pedals!
- KVRAF
- 35409 posts since 14 Sep, 2002 from In teh net
Which one is based on Plaits?WasteLand wrote: ↑Fri Jun 18, 2021 8:51 amyes, also one or two VCV modules! and nice ports from MI. nice to have them also in ableton, native...SLiC wrote: ↑Fri Jun 18, 2021 8:16 amWow- that's some really good stuff- I have a lot of those modules in hardware (Tides, Plaits, Clouds) so it will be interesting to play with them...and it will cost me a lot less than buying the hardware did!WasteLand wrote: ↑Fri Jun 18, 2021 8:02 am some of the M4L devices are based on Mutable Instruments, other seems to 'wrap' them, so, it seems the source code is used for most. others are, i repeat based on..
but for the prices;
https://gumroad.com/delirios?sort=page_layout
Really cool to see some of the parasites firmware ported over (that the one I use in Clouds) and also VCV modules ported as MAX!
Will try a few of these this weekend, thanks for the link--- I had a quick look and I cant see a MAX 8 thread on KVR...I know MAX has its own forum, but it would be really cool to even have a MAX forum on KVR (M4L, new modules, learning MAX etc), I have found some amazing new stuff just from this thread!
yes indeed a version, variant on Clouds. me like.
i get my info via Facebook, yes... Max For Live Users, a lot of developers, or a lot... and users of course, that share links... it is indeed a goldmine...
so i port my info to this thread...
there is a M4L thread here, also got me something, but it isn't that a-live...
an update by the way for live 11, will come or not.. but it works of course for live 11, all the things you can do, i believe, in live 10.SLiC wrote: ↑Fri Jun 18, 2021 8:23 amI am hoping Ableton implement this to get full use of the screen, its so bloody obvious it needs doing!WasteLand wrote: ↑Thu Jun 17, 2021 2:14 pm this seems quite promissing, for arrangment mode
https://gumroad.com/valiumdupeuple#KUTUz
€6,66 (+VAT when VAT is needed..)
an update for live 11 will come, but it will work of course, the update for live 11 will include new options, i guess, special to v11..
I would much rather the used the buttons and knobs more so they can be labelled (I can never remember what unlabelled pads do!) and just use the pads for moving around and selection
That volume and pitch tool is the timeline is cool as well, again- Ableton!!?
and indeed! why doesn't Ableton does this. it can be done!!!! with the screen, look at Maschine MK3.... like it how they did that for Maschine MK3 (and Maschine+, i only have Maschine Mk3 + Jam...).
i didn't tried it yet, because only next week i am able to work in ableton (why? able - ableton...), then i will buy this one, the ports....
why can't ableton be not more able, to integrate more in the Push 2. it is all there, get a programmer...
but i work mostly in session view. of course an arrangment will be made.. and indeed, Push 2, only for the mix, and does it represent audio tracks?? in arrangment mode.
(and it does not have even stop/forward/rew/pause.... o well... still use the Push 2 a lot, when i am working with live 11 suite).
and make SIMPLER simple MPE!!
- Banned
- 11467 posts since 4 Jan, 2017 from Warsaw, Poland
Indeed, it's pretty special! The quality of the algorithm easily rivals Melodyne and the workflow & integration are way ahead of e.g. Studio One where it feels "tacked on".
I really hope Bitwig & Live go the Reason route, especially if they'd try to extend it with some creative features like they usually do in their devices & workflow.