DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.1)

[djfoxtrot]

Hello again Moss,
I searched around for this answer but couldn't find anything - sorry if it has already been asked.
I have a push 2 with the drivenbymoss script, and have been trying to figure out how to have the "stop clips" function pinned to stop clips on session mode while I look at the project remotes at the same time on the top screen.
Thank you!

[moss]

Thank you for your earlier reply, I’m MPC is hooked up now

I’m hoping to get my PS4 gamepad working as a controller too - it is selected as a game pad and found as a “PS4 controller,” I see many note mappings but when I link my game pad to an instrument track, there is no MIDI activity. I’ve tried to load MIDI modulators and map CCs to no avail.

Please can you help me out? Thanks

I have no PS4 gamepad for testing but it might be that not each and every controller is working with the library I use.

[moss]

oh oh oh yep that did it. I copied it from ur manual. But either way now it works. I am excited to share this template! it is very nice and very useful.

Oh, I see. Good old TeX...

how about scene colors? I am not able to get the LED to show the color atm

There is an error in the manual. Correct is the following like with all other parameters:
/scene/{1-8}/color

hmm I tried to set KVR to notify me for replies but I guess it didnt work.... Anyway, I just tried /scene/1/color with my first scene colored green and the led is not lighting up. I tried it on my vertical clip launcher and on my test page and either way it didnt work. any ideas?

Check if the color is formatted correctly. Also check if the color for the clip is working for you which works the same way.

[moss]

Hello again Moss,
I searched around for this answer but couldn't find anything - sorry if it has already been asked.
I have a push 2 with the drivenbymoss script, and have been trying to figure out how to have the "stop clips" function pinned to stop clips on session mode while I look at the project remotes at the same time on the top screen.
Thank you!

I am afraid you can't.

[sebastian_blu]

oh oh oh yep that did it. I copied it from ur manual. But either way now it works. I am excited to share this template! it is very nice and very useful.

Oh, I see. Good old TeX...

how about scene colors? I am not able to get the LED to show the color atm

There is an error in the manual. Correct is the following like with all other parameters:
/scene/{1-8}/color

hmm I tried to set KVR to notify me for replies but I guess it didnt work.... Anyway, I just tried /scene/1/color with my first scene colored green and the led is not lighting up. I tried it on my vertical clip launcher and on my test page and either way it didnt work. any ideas?

Check if the color is formatted correctly. Also check if the color for the clip is working for you which works the same way.

everything on the launcher is working I added a pic below of where the launcher is at the moment, I also added a screen shot of the OSC for the scene button

[stanislav_abraham]

Dear Jürgen, please, is there any option to switch faders to absolute on Maschine Jam?
In your DrivenByMoss - Bitwig/Maschine Jam script there is possibility to use faders (touch strips) with SHIFT button for fine volume changes... same as you describe in manual for encoder: "Use the encoder in combination with SHIFT for slower changes". With that function, faders are not jumping in relative mode (I put finger at some position and fader jump there) so anywhere I put my finger on fader, it will not jump. It would be also great if shift would be possible use in toggle mode for using faders this way. To kind of "lock" shifted function for period of time during fine mixing with faders. I would appreciate this function while mixing sound during theater performance. So, I could mix more tracks with both hands with no need to hold SHIFT button. I tried to read script, but my programming skills are very low (almost zero). I guess I was able to find setting for shift button conditions in the script. Check my screenshot picture...

I would like to say big thanks for your contribution to music community also!!!
It's amazing!!!! Thank you!

Screenshot 2025-10-17 at 19.51.28.png

[moss]

everything on the launcher is working I added a pic below of where the launcher is at the moment, I also added a screen shot of the OSC for the scene button

You need to set the color on the colorFill attribute. Here is an example with a button:

SceneColor.png

[sebastian_blu]

You need to set the color on the colorFill attribute. Here is an example with a button:

SceneColor.png

ok ok! that worked once I realized OSC is capitalized. But it didnt work for LED widget which is how all of the clip colors work in my templat. LED underneath invisible buttons. Do you have any insight as to why it would work on LED but does as change to the button widget property?

Also I didnt realize we could change widget properties this way. I think when I first started with this back in 2017 that wasn't possible, so I have been stacking things. Thanks for the tip. One step closer to a release to share. I keep learning new tricks and refining things, but have also been using the launcher and it is working great for writing sessions.

[sebastian_blu]

is there a way to have effect tracks be selected like /track/@{parent.variables.n}/selected etc but specifically for effect tracks?

I want to be able to create a some buttons that will allow me to select effect tracks from the touch screen

[moss]

Dear Jürgen, please, is there any option to switch faders to absolute on Maschine Jam?
In your DrivenByMoss - Bitwig/Maschine Jam script there is possibility to use faders (touch strips) with SHIFT button for fine volume changes... same as you describe in manual for encoder: "Use the encoder in combination with SHIFT for slower changes". With that function, faders are not jumping in relative mode (I put finger at some position and fader jump there) so anywhere I put my finger on fader, it will not jump. It would be also great if shift would be possible use in toggle mode for using faders this way. To kind of "lock" shifted function for period of time during fine mixing with faders. I would appreciate this function while mixing sound during theater performance. So, I could mix more tracks with both hands with no need to hold SHIFT button. I tried to read script, but my programming skills are very low (almost zero). I guess I was able to find setting for shift button conditions in the script. Check my screenshot picture...

I would like to say big thanks for your contribution to music community also!!!
It's amazing!!!! Thank you!

Will be in the next update

[moss]

You need to set the color on the colorFill attribute. Here is an example with a button:

SceneColor.png

ok ok! that worked once I realized OSC is capitalized. But it didnt work for LED widget which is how all of the clip colors work in my templat. LED underneath invisible buttons. Do you have any insight as to why it would work on LED but does as change to the button widget property?

Make sure you have set the LED -> mode to "color". The documentation for Open Stage Control is pretty good:
https://openstagecontrol.ammd.net/docs/ ... roduction/

[moss]

DrivenByMoss 26.4 is online!

Get it from https://mossgrabers.de

• Maschine JAM
  • New: Using Shift in combination with the faders allows for smaller changes. Furthermore, the value does not jump when the fader is touched.
  • New: Added setting 'Slow Fader Change' to be able to store the small fader changes. Toggle with Shift+Select.
  • New: Added setting 'Startup mode' to select the mode which will be activated on startup.
  • Fixed: Shift mode does not activate if Shift button was used in combination with another button.
• MCU
  • New: Startup mode: Select the mode which will be activated on startup.

Enjoy!

[sebastian_blu]

oops delete post

[sebastian_blu]

oops

[sebastian_blu]

Oops how do i delete posts