DrivenByMoss: Bitwig extension for many hardware controllers (version 26.6.1)

[Russell_Nash]

Hi Jürgen,
first of all, thank you very much for this awesome script.
I am using it among others with my Launchpad Mini MK3. Here I mainly use the Session – Flipped view. For me it would be great, if by pressing the Session button once more, instead of rotating the view, one would get some kind of control panel where one could arm, solo, mute or stop multiple tracks. This way it would also be possible to stop the playback of a scene if the track is armed. Flipping between Session and Session – Flipped is something I don’t do, so for me, this could be something, which could be set in the controller settings menu. I have drafted the layout and attached it so it might be easier to understand, what I am talking about.
This is just my personal preference, not sure if other users would be OK with this kind of change (or if it is even possible).
Cheers, Torsten

[moss]

DrivenByMoss 26.5.1 is online!

Get it from https://mossgrabers.de

• Electra One
  • Fixed: Session view was broken. There were 6 scenes instead of 5 which also interfered with the 6th navigation column.

Enjoy!

[Tootooroot]

Hi Jürgen,

Question on Apc 40 MKII:

Do you think it’s possible to have an option when apc’s faders are fully up it match odb on bitwig volume faders instead of +10db ?

Thanks for your time !

2025 - same question.
plz plz plz make fader maximum value in track volume mode = 0 Db. dont want to put tool and set it to -10 db on every track for my live performances.

Keep one finger above the fader when you move it up and you will end at -10dB

A lot of people would love to have the option to have faders maxed at 0dB instead +6. Me included. The existing solutions/workarounds are pretty annoying and definitely not ideal.

There's tons of posts on various forums with people asking how to do it in either Bitwig or Ableton with apc mini, apc 40, sl mk3, launchkey, launch kontrol etc. It would definitely be a very popular feature.

If it's possible.

[Fenrok]

I have both an iCon P1-M and P1-Nano mackie mixer units. The P1-Nano does not update the small screen beside the fader as tracks are changed, when using DrivenByMoss. The top 8 screens update fine, but the single screen requires manual moving. This is a problem, because the single fader controls the currently selected track, but you can't tell which track is selected on the screens (only in Bitwig).

The P1-M works flawlessly as expected with DrivenByMoss. The P1-Nano single screej works as expected with Bitwig's default script, but it's missing DrivenByMoss extra functions.

Could you please update the script to fix this bug with the single display? I tried changing all the settings in the deivenbymoss Mackie settings, but none of them helped.

Thank you!

[iNNeRNoiZe]

Any chance for MPC Live 3 support?

[moss]

Any chance for MPC Live 3 support?

So far, no one could confirm if the Mk3 provides that DAW mode. If it does, it might work out of the box. If you have one, please check.

[iNNeRNoiZe]

Works ootb !

Any chance for MPC Live 3 support?

So far, no one could confirm if the Mk3 provides that DAW mode. If it does, it might work out of the box. If you have one, please check.

[moss]

Works ootb !

Any chance for MPC Live 3 support?

So far, no one could confirm if the Mk3 provides that DAW mode. If it does, it might work out of the box. If you have one, please check.

Great!

[Stephan326]

What about MPC Key 37? been working with it for 2 weeks

[moss]

What about MPC Key 37? been working with it for 2 weeks

... and did you check?

MPC Key 61 strangely does not have that mode, I did not get an answer from Akai why this is the case.

[HPKVR]

Hi Moss,
I found a bug in BW6b12 (sent to BW beta support) and Akai APC40mk2.

1) The problem is - APC40mk2+Moss script opens clip editor panel each time when I trigger clip. Even if I press "E" shortcut to hide it and launch another clip (or the same clip) it opens clip editor panel again and again. It was not present in BW5 or any BW6 betas until beta12. With BW script for APC40mk2 everything works as usual.

and the answer from BW beta support is
...please be sure to report this bug to Moss.
It seems the script always does select + showInEditor together, but only beta 12 now contains a fix for a bug that made showInEditor not work for scenes, so it did not happen before.

2) and +1 for faders maxed at 0dB instead +6 (switch between 0 and +6 would be ideal)

3) FR horizontal scrolling by page/clip - please can u add option (like in BW script setting for APC40mk2) in your script setting or some hw shift switch for clip launcher scrolling (horizontal and vertical) by page/clip. Now the vertical scrolling scrolls by clip and +shift up/down by page, but horizontally it scrolls only by page (the +shift left/right does nothing)

Thank you
Petr

[carlca]

Hi Jürgen,
Have you come across Yamaha's new CC1 device? It looks really cool and apparently works with Cubase out of the box. Do you think it would be a big job to get it to work with Bitwig?
Here's a YT video all about it...

[haiduc]

Hi there,
I have a Novation Launchpad Mini MK2 that I'd like to integrate into Bitwig.
As far as I understand, that specific controller is not supported by DrivenByMoss, but I'd imagine it would be possible to maybe start from a script for a similar model and tweak it?
Would you suggest going that route or rather writing a new script from scratch?
Thanks!

[moss]

DrivenByMoss 26.6.0 is online!

Get it from https://mossgrabers.de

• Added support for OXI One Mk2
• OXI One Mk1
  • New: Drum XoX has been moved to other sequencers on the ARP button.
  • Fixed: Shift+Play did not trigger tap tempo.
  • Fixed: Arp button was not lit when Raindrop sequencer was selected.
  • Fixed: Starting non-existing scenes did show an empty text box.

Enjoy!

[autthu]

Hello Jurgen! In bitwig 6 beta 12, the AKAI FIRE device does not copy clips (DRUM mode)

P.S. Sorry, copying still works after restarting bitwig.