u-he

mäxchen · Post by **mäxchen** » Sun Dec 14, 2008 11:36 am

hello urs,

do you think it is possible to run your plugs on a v-machine? i DONT mean the cpu power, i mean your copy protection. it would be nice to run some simple zebra2 patches at a v-machine or some ubik effects...

i have one unit and will try a lot of things next week when i have holidays.
apart from your answer i will try to get zebra2 work on my v-machine.
i dont think that you have to give me support (i bought your plus to run on my laptops and this are they doing fine

but i think it can be interested for you if your plugs work with the v-machine....

have a nice sunday
max

Urs · Post by **Urs** » Sun Dec 14, 2008 11:50 am

Hiya,

I have a positive report that the pre-installed Zebra2 works on it! That's the one for Receptor on the downloads page:

"Geht mit der Recptorversion, brauchte nur im Editorfenster die Seriennummer eingeben.
Kann aber sein, dass der Editor noch komisch aussieht."

I have sent copies of my stuff to their distribution company who are in charge of finding installation procedures. They have actually requested this. I hope to hear back from the soon.

Cheers,

Urs

mäxchen · Post by **mäxchen** » Sun Dec 14, 2008 12:59 pm

thx urs,

good to know. thx for your quick anwer... triple cheese on the v-machine would be great too.

max

Urs · Post by **Urs** » Sun Dec 14, 2008 1:14 pm

mäxchen wrote:thx urs,

good to know. thx for your quick anwer... triple cheese on the v-machine would be great too.

max

Check the Receptor forum... I think I had a Triple Cheese built for it. It should work the same way with the latest 3C, but it just occurred to me that I havn't released the final 3C V1.1...

Urs

mäxchen · Post by **mäxchen** » Fri Dec 19, 2008 7:44 pm

triple cheese works very nice on the v-machine. no problem at all

i have not tried zebra2. any replay from smproaudio?
ok, just at this moment i realised what you ment with "download page" - YOUR download page. i have searched the whole web for this f... zebra2 receptor download

ok, will give it a try this night (ganz aufgeregt)

Urs · Post by **Urs** » Fri Dec 19, 2008 8:10 pm

No reply yet, but I've seen that they're pretty close on MusikMesse

mäxchen · Post by **mäxchen** » Fri Dec 19, 2008 8:22 pm

zebra2 on v-machine is easy (with receptor installer).

i took my number and gave it to zebra, then i tranferd zebra to the v-machine and it works !!!!!!!!!!!!!!!!!!!!!
glad that i bought ubik

more to try...
the VFX-software (software for pc to administrate te v-machine has some big problems with the grafik of zebra2, but you can work with it)
so enjoy your weekend - bye
max

Urs · Post by **Urs** » Fri Dec 19, 2008 8:32 pm

Thanks! Not sure if Uhbik will work just yet though... I might have to add a "pre-installed" version...

mäxchen · Post by **mäxchen** » Fri Dec 19, 2008 8:59 pm

a "pre-installed" version would be very kind of you, maybe you add a page "receptor and v-machine" to your homepage where pre-installed downloads can be found and some little explanation how to handle these. for the v-machine i could help a little bit (testing and explain how to transfer).
max

Urs · Post by **Urs** » Fri Dec 19, 2008 9:18 pm

mäxchen wrote:a "pre-installed" version would be very kind of you, maybe you add a page "receptor and v-machine" to your homepage where pre-installed downloads can be found and some little explanation how to handle these. for the v-machine i could help a little bit (testing and explain how to transfer).
max

That's how we'll do it!

Gimme a couple of days...

mäxchen · Post by **mäxchen** » Fri Dec 19, 2008 9:26 pm

take the time you need !

if you need help/testing start a fire and i will see the smoke.
i hope christmas is holiday for you too.
once again, i know it is not really your problem how to "play" your plugins on "machines" but i think it is not a failure to do so

(was ein übles englisch)
max

fas1piano · Post by **fas1piano** » Mon Dec 22, 2008 9:34 am

mäxchen, how does the v-machine handle zebra patches (factory patches) cpu-wise ?

cheers, f

mäxchen · Post by **mäxchen** » Mon Dec 22, 2008 12:59 pm

i just tried one patch, i wanted to know if zebra is working on the v-machine.
best thing would be just say me maybe three patches and i will try them and let you know how much voices are possible (each patch alone).
is this ok for you?
max

fas1piano · Post by **fas1piano** » Mon Dec 22, 2008 2:42 pm

that would be cool - what about "crimson flutes" with controllers used ? can you play chords with that? and maybe some other polyphonic pad type patch?

cheers
f

mäxchen · Post by **mäxchen** » Mon Dec 22, 2008 6:38 pm

hello fas1piano,

please specify: which controllers should i use and please name the other patches, so you will get the informations you need

will try out tomorrow. then i will report

max

u-he

KVR Audio

u-he on v-machine ?