Upgraded from Tracktion 6 to Tracktion 7 now audio only comes out to playback speakers in left channel.
it is showing both channels audio present in Tracktion and on input into Behringer.
odd I have checked audio out settings but cannot find anything different reset to factory and did not resolve.
Nothing was changed cord or hardware wise. only upgraded from 6-7
Thoughts or Suggestions?
Thanks!
Upgraded from Tracktion 6 to Tracktion 7 now audio only comes out in one channel
-
- KVRist
- 128 posts since 15 Jul, 2017 from Monterrey
does your right speaker works?
is the problem solved when opening in tracktion 6?
is the problem solved when opening in tracktion 6?
Quad Core | 16GB DDR4 | 240 GB SSD + 1 TB HDD | FLStudio ASIO | 1 GB Video | W10 x64
-
vitocorleone123 vitocorleone123 https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=333504
- KVRAF
- 1964 posts since 30 Jun, 2014 from Pacific NW
You might also check your channel routing/input/output in Settings -> Audio Devices to make sure nothing is wonky if you haven't already done so.
EDIT: oops. you already have
EDIT: oops. you already have
-
- KVRer
- Topic Starter
- 3 posts since 13 Oct, 2017
I am an idiot is the problem. So after looking over everything one more time I guess inadvertently punched off the left main channel on my mixing board.
Problem solved Thanks!
Problem solved Thanks!
-
- KVRist
- 128 posts since 15 Jul, 2017 from Monterrey
wattsun wrote:I am an idiot is the problem. So after looking over everything one more time I guess inadvertently punched off the left main channel on my mixing board.
Problem solved Thanks!
so the problem is fixed now Quad Core | 16GB DDR4 | 240 GB SSD + 1 TB HDD | FLStudio ASIO | 1 GB Video | W10 x64
