Does anyone know of a delay plugin that has extreme fine tuning capabilities in its timing?
What I am specifically looking for is a 0.001ms to 100.000ms range that allows the .xxx three decimal places once the time passes 10ms.
Mostly looking to create more accurately tuned resonators.
Any advice/ ideas would be greatly appreciated.
TIA
Micro delay plugin?
-
- KVRian
- 965 posts since 12 May, 2019
-
- KVRAF
- 2702 posts since 9 Jul, 2015 from UK
So Melda delay works for you up to 10ms, right?
I would just use more than 1 of them (in series).
If you want 57.463ms then simply set the first delay to 57ms and the second to 0.463ms.
This might be too obvious, sorry, but just trying to give you a solution using the tools you already have.
I would just use more than 1 of them (in series).
If you want 57.463ms then simply set the first delay to 57ms and the second to 0.463ms.
This might be too obvious, sorry, but just trying to give you a solution using the tools you already have.
Jason @ Melda Production
-
- KVRist
- Topic Starter
- 460 posts since 25 Jan, 2016
Thanks jmg8.
The 'too obvious' part was what I was missing, but in a different way. I just needed to create a microdelay as you described..as a preset! I was so focused on the little details that I overlooked the advantages of the software that I am using.
Looking forward to the sample pack you are working on. (I'm not a beta tester and even in these times, I'm still putting in 60 hours a week at work.)
The 'too obvious' part was what I was missing, but in a different way. I just needed to create a microdelay as you described..as a preset! I was so focused on the little details that I overlooked the advantages of the software that I am using.
Looking forward to the sample pack you are working on. (I'm not a beta tester and even in these times, I'm still putting in 60 hours a week at work.)
-
- KVRist
- Topic Starter
- 460 posts since 25 Jan, 2016
Somewhat along the same line of thinking, can we have a button added to the Rate parameter of the Chorus/ Flanger/ Phaser that will disable it (the Rate)? This way we can use those effects as either resonators or filters. Currently the Rates only go down as far as 0.01Hz and the movement is prohibitive to creating a consistent effect.
-
- KVRist
- 308 posts since 11 Jul, 2016
Could he use the multiband functionality to create "two instances", and hence, a preset?jmg8 wrote: Sat Apr 11, 2020 8:11 am So Melda delay works for you up to 10ms, right?
I would just use more than 1 of them (in series).
If you want 57.463ms then simply set the first delay to 57ms and the second to 0.463ms.
This might be too obvious, sorry, but just trying to give you a solution using the tools you already have.
-
- KVRAF
- 2702 posts since 9 Jul, 2015 from UK
No. Multiband when in disabled mode would be parallel. He needs serial.
The normal delay has 2 delays and can be set to serial, so that should be enough.
The normal delay has 2 delays and can be set to serial, so that should be enough.
Jason @ Melda Production
-
- KVRian
- 965 posts since 12 May, 2019
It's the 3 second brand bumper that goes after the intro. I finished it yesterday so it'll be in my next video, Werzel. Thanks for your interest - I'll post a link once it's uploaded.werzel wrote: Sat Apr 11, 2020 4:09 am Thanks Hexspa.
Unfortunately, AutoAlign doesn't seem to do the trick for me.
When is your teaser video coming out?
-
- KVRAF
- 3180 posts since 10 Jan, 2005
-
- KVRAF
- 10376 posts since 2 Sep, 2003 from Surrey, UK
Maybe I have misunderstood. Why not double-click the Delay control and type in the exact value you require. I thought that that value displayed was just rounded for display. Using the Basic Device in MDelayMB, with a few edits, I typed in a 100 ms delay and recorded the result. Then I tried it with a 100.45 ms delay and . And there was a difference:
The only issue was that the 100.45 was not displayed with I opened the value editor again.
The only issue was that the 100.45 was not displayed with I opened the value editor again.
Last edited by DarkStar on Mon Apr 13, 2020 12:43 pm, edited 1 time in total.
-
- KVRist
- Topic Starter
- 460 posts since 25 Jan, 2016
jmg8 - the 'LFO override' was exactly what I was looking for...but thought that it meant something different. Using it with Chorus/ Flanger/ Phaser turns those plugins into very interesting filters!
sirmonkey & mibby - The series routing suggested by jmg8 seems to be working best for my current experiments. Thanks for the ideas though.
hexspa - I'll definitely check the link once posted.
mabian - Thanks for the suggestion, though without a feedback option, it doesn't suit my current needs.
DarkStar - interesting. How do the results for 100.40, 100.45 and 100.50 ms compare? It's those micro (.xxx) ms settings that allow for more accurate tuning of delays. I'm toying with custom resonators/ comb filters here.
sirmonkey & mibby - The series routing suggested by jmg8 seems to be working best for my current experiments. Thanks for the ideas though.
hexspa - I'll definitely check the link once posted.
mabian - Thanks for the suggestion, though without a feedback option, it doesn't suit my current needs.
DarkStar - interesting. How do the results for 100.40, 100.45 and 100.50 ms compare? It's those micro (.xxx) ms settings that allow for more accurate tuning of delays. I'm toying with custom resonators/ comb filters here.
-
- KVRAF
- 10376 posts since 2 Sep, 2003 from Surrey, UK
Seems to be working:
And ABing pairs of tracks (with one polarity switched) confirms that they are different.
And ABing pairs of tracks (with one polarity switched) confirms that they are different.