20.00 0.0
20.55 0.0
21.11 0.0
21.69 0.0
22.29 0.0
22.90 -0.1
...etc out to 22khz
I'm hoping to not have enter all this by "hand"...
.../s~MFreeFormEQ: can it import a mic calibration text file?
-
- KVRian
- 915 posts since 2 May, 2015
I've acquired a DaytonAudio iMM-6 microphone which comes with an individualized eq curve for flat response audio testing. The file format is this:
20.00 0.0
20.55 0.0
21.11 0.0
21.69 0.0
22.29 0.0
22.90 -0.1
...etc out to 22khz
I'm hoping to not have enter all this by "hand"... .../s~
20.00 0.0
20.55 0.0
21.11 0.0
21.69 0.0
22.29 0.0
22.90 -0.1
...etc out to 22khz
I'm hoping to not have enter all this by "hand"...
.../s~mba m2 15" | 16gig.ram | 1tb ssd | macOS 26.1 Tahoe
logic 11.2.2 | reaper 7.75 | cubase 14.0.4
focusrite.2i2 | A&H CQ18t
logic 11.2.2 | reaper 7.75 | cubase 14.0.4
focusrite.2i2 | A&H CQ18t
-
- KVRian
- 1094 posts since 23 Sep, 2006
Yes! I was digging into this recently and it works great.
You can follow along the conversation here. Just remember to invert Y on the points after you've got it to work or you'll be doubleing the microphone curve!
viewtopic.php?f=138&t=570614
You can follow along the conversation here. Just remember to invert Y on the points after you've got it to work or you'll be doubleing the microphone curve!
viewtopic.php?f=138&t=570614
-
- KVRian
- Topic Starter
- 915 posts since 2 May, 2015
...thanx for the follow up @VW...I had read through your posted thread, which is what "inspired" me to acquire the mic and dedicated correction file. However, having gone dense, I can't discover how to "Import that file into MFreeformEqualizer.".../s~
mba m2 15" | 16gig.ram | 1tb ssd | macOS 26.1 Tahoe
logic 11.2.2 | reaper 7.75 | cubase 14.0.4
focusrite.2i2 | A&H CQ18t
logic 11.2.2 | reaper 7.75 | cubase 14.0.4
focusrite.2i2 | A&H CQ18t
-
- KVRAF
- 10375 posts since 2 Sep, 2003 from Surrey, UK
Right-click in the graph, click [Import CSV] and browse to the file.
...duhoo...thanx again.../s~