turning off the sequencer Bazille

[voiceprint1]

hi, how do I turn off or disable patches that have a sequencer part running in Bazille, it does not seem straight forward?

thanks

[pdxindy]

Unplug the cables

If you want to keep the cables, you can set the sequencer to a blank snapshot (assuming there is one) and then it will have no effect.

[voiceprint1]

tried that, on some patches it just lead to silence, others seemed like the patch was tied to the sequencer somehow and was still triggering a pattern? I know not every patch is wired the same

[seafire]

Which patches specifically?

[pdxindy]

tried that, on some patches it just lead to silence, others seemed like the patch was tied to the sequencer somehow and was still triggering a pattern? I know not every patch is wired the same

There's no one answer. You have to examine the individual preset. Look at the mod targets for the sequencer. For example, if the sequence is generated by the sequencer modulating Osc level and the Osc level is at 0 without modulation, then there will be no sound when you unplug the sequencer.

[voiceprint1]

thanks for the replies, I guess I am having trouble understanding how the patches once free from the sequencer are then re-routed back into the structure and outputs of Bazille.

In the factory selections there is a patch called AZ dawn glitchy, when I took the sequencer cables off it seemed to still be following a pattern?

[pdxindy]

In the factory selections there is a patch called AZ dawn glitchy, when I took the sequencer cables off it seemed to still be following a pattern?

Output 2 is set to Env 4.

Env 4 is retriggered by LFO2 - That is what you are hearing when you disconnect the Sequencer

[voiceprint1]

not sure about that routing for the envelope to LFO?

[pdxindy]

not sure about that routing for the envelope to LFO?

On the Original Skin (which you are using), you have to go to the Tweaks tab to see the Env Trigger option. You will see there that Env4 is triggered by LFO2