Actually I use FW 1.1.0412101413 (beta release) in my Receptor. Receptor Remote SW works correctly on my PC but I am unable to add new Network Place for Receptor throught description on page 140 of it´s user´s manual. I use Win XP Professional including newest service packs. I tried everything:
1. switching Receptor in Auto or Manual mode.
2. manually re-type Receptor´s TCP/IP setting into
XP´s Connecting into local network
3. etc.
Always this message appears "Target folder is invalid, try different folder". Of course I use the right syntax: "\\Receptor-192004\Hard Disk"
In last FW 1.0 all worked correctly.
Which settings do you use? Any help?
Vaclav, Czech Republic
Problem with connecting to computer
-
- KVRist
- 39 posts since 26 Dec, 2004 from Hradec Kralove
-
Rick@MuseResearch Rick@MuseResearch https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=18273
- MUSEician
- 350 posts since 23 Mar, 2004
Vaclav,
Here's a easy work around, I'm assuming you are connecting over a LAN and your Receptor Remote is working.
1. Press the SETUP button on the Front Panel
2. Turn the top display knob until you see "SU Name"
In this msg it appears your Receptor name is "Receptor-192004"
3. Start Internet Explorer and in the address field enter \\Receptor-192004 and press enter
You should now see your hard drive, you can now drag the Hard Drive icon to your Desktop for future connections.
If need any addtional help write direcdtly to me at Muse.
Here's a easy work around, I'm assuming you are connecting over a LAN and your Receptor Remote is working.
1. Press the SETUP button on the Front Panel
2. Turn the top display knob until you see "SU Name"
In this msg it appears your Receptor name is "Receptor-192004"
3. Start Internet Explorer and in the address field enter \\Receptor-192004 and press enter
You should now see your hard drive, you can now drag the Hard Drive icon to your Desktop for future connections.
If need any addtional help write direcdtly to me at Muse.
jezisek wrote:Actually I use FW 1.1.0412101413 (beta release) in my Receptor. Receptor Remote SW works correctly on my PC but I am unable to add new Network Place for Receptor throught description on page 140 of it´s user´s manual. I use Win XP Professional including newest service packs. I tried everything:
1. switching Receptor in Auto or Manual mode.
2. manually re-type Receptor´s TCP/IP setting into
XP´s Connecting into local network
3. etc.
Always this message appears "Target folder is invalid, try different folder". Of course I use the right syntax: "\\Receptor-192004\Hard Disk"
In last FW 1.0 all worked correctly.
Which settings do you use? Any help?
Vaclav, Czech Republic
Rick
Muse Research
Muse Research
-
- KVRist
- Topic Starter
- 39 posts since 26 Dec, 2004 from Hradec Kralove
Finally it is working !!!
Of course I tried your help and link Receptor through Internet Explorer but it didn´t also help.
After 6 hours testing and trying
I tried to uninstall SW "Zone Alarm" from my PC and since then it starts to work. It is interesting that only disabling of Zoner Alarm didn´t help, I had to uninstall it completelly!
Ufff, now it works and I will start to explore new 1.2 FW.
Have a nice day!
Vaclav
Of course I tried your help and link Receptor through Internet Explorer but it didn´t also help.
After 6 hours testing and trying
I tried to uninstall SW "Zone Alarm" from my PC and since then it starts to work. It is interesting that only disabling of Zoner Alarm didn´t help, I had to uninstall it completelly!Ufff, now it works and I will start to explore new 1.2 FW.
Have a nice day!
Vaclav