It'll work in Renoise' next update.Polybius wrote:Is it worth going trough the hassle of installing to see if it'll work in Renoise yet? Or are you sure it's not going to work untill TakTik straightens Renoise out?
Thanks in advance!
Zebra 2.3 Released!
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
Yeah, I know that one. Only happens when you switch from Original to the Dark Horse. I must have missed out on something within the gui description. Doesn't really matter, as soon as you load a preset or do anything in the grid (move VCF1 a slot down or anything), the SB's will vanish. Hence it's almost less than a cosmetic issuepoonna wrote:Bug report, I guess.
Load Zebra 2.3RC, switch to Unempty Dark Horse Skin, switch to Synthesis tab, there you go, 2 mysterious SB modules that don't belong to the initialize patch show up.
PS: I install 2.3RC over the 2.2 installation. Is that the correct way? Do I need to do clean install?
-
- KVRian
- 527 posts since 12 Dec, 2007 from Belgium
Thanks, i'll start harassing the Renoise forums now and leave you aloneUrs wrote:It'll work in Renoise' next update.Polybius wrote:Is it worth going trough the hassle of installing to see if it'll work in Renoise yet? Or are you sure it's not going to work untill TakTik straightens Renoise out?
Thanks in advance!
. ooh...Renoise Beta5 just got released
*fingers crossed*
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
No worries, I just found a workaround on my side to make it work with renoise, too!
I'll put this in as the last change before relase
Later,
Urs
I'll put this in as the last change before relase
Later,
Urs-
- KVRist
- 140 posts since 28 Apr, 2004 from switzerland
on fl studio 8.02 i cant switch to other skin. in the look menu i cant choose a skin. only resolutions are showed.
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
You probably got a Zebra2.data folder in Vstplugins? - Then you gotta rename that and either keep stuff in C:\Program Files\u-he\ or download the pre-installed version...psycox wrote:on fl studio 8.02 i cant switch to other skin. in the look menu i cant choose a skin. only resolutions are showed.
-
- KVRist
- 140 posts since 28 Apr, 2004 from switzerland
thanks urs. that works. i try to remind this trick for the next update.Urs wrote:You probably got a Zebra2.data folder in Vstplugins? - Then you gotta rename that and either keep stuff in C:\Program Files\u-he\ or download the pre-installed version...psycox wrote:on fl studio 8.02 i cant switch to other skin. in the look menu i cant choose a skin. only resolutions are showed.
but i found an other little bug: when i close the gui of zebra while playing an automated patch fl studio crashes.
-
- KVRist
- 244 posts since 16 Feb, 2003 from Switzerland
Urs,
the new compressor modes cannot be accessed from the Unempty Horse skin.
Other than that, all looks good so far...
Thanks for the update, it's much appreciated
A definitive (sticky) post on exactly how to install using both methods (as well as a bit of background why which folders need to be where) may be useful?
I know that you are intimately familiar with how these computer thingies work, but do consider us lesser mortals
Cheers,
bagginz
the new compressor modes cannot be accessed from the Unempty Horse skin.
Other than that, all looks good so far...
Thanks for the update, it's much appreciated
I tried to follow this instruction but to no avail. I ended up uninstalling the lot, downloading the Win installer and re-installing afresh.Urs wrote: You probably got a Zebra2.data folder in Vstplugins? - Then you gotta rename that and either keep stuff in C:\Program Files\u-he\ or download the pre-installed version...
A definitive (sticky) post on exactly how to install using both methods (as well as a bit of background why which folders need to be where) may be useful?
I know that you are intimately familiar with how these computer thingies work, but do consider us lesser mortals
Cheers,
bagginz
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
Yo bagginz,
it's true, I forgot the new compressor modes... no big deal, will add them - it's just a couple of lines in the gui script
#---
The whole Zebra2.data thing turned out to be a disaster, that's why I'm folding it back. The folder is needed for Receptor compatibility and a few people preferred this way of installation where all data is in one place. It just has the disadvantage that even simple updates can lead to loss of patches and registration info. Hence I will only support it as a separate download, for those who intentionally want such an installation.
There's an article in the manual and in the ReadMe, but I'll probably extend that a bit.
Urs
it's true, I forgot the new compressor modes... no big deal, will add them - it's just a couple of lines in the gui script
#---
The whole Zebra2.data thing turned out to be a disaster, that's why I'm folding it back. The folder is needed for Receptor compatibility and a few people preferred this way of installation where all data is in one place. It just has the disadvantage that even simple updates can lead to loss of patches and registration info. Hence I will only support it as a separate download, for those who intentionally want such an installation.
There's an article in the manual and in the ReadMe, but I'll probably extend that a bit.
Urs-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
Time for another quick check before release (Monday?):
Zebra23MacInstall (VST & AU, RTAS Mac)
Zebra23Winstaller (normal installer for Windows)
Zebra23pre-installed (with Zebra2.data for Receptor, Everything In Vstplugins)
- Unempty Dark Horse should now show Compressor Type
- support for non-SSE2 machines
- last minute crash bug removed in VST Mac
- works in Renoise
Further issues?
#---
Also, for the brave among Win users, this one:
http://www.u-he.com/Z2MKL2.zip (dll only)
- does it work?
- does it sound right?
- is it faster? (especially on high Oscillator Resolution settings)
Later,
Urs
Zebra23MacInstall (VST & AU, RTAS Mac)
Zebra23Winstaller (normal installer for Windows)
Zebra23pre-installed (with Zebra2.data for Receptor, Everything In Vstplugins)
- Unempty Dark Horse should now show Compressor Type
- support for non-SSE2 machines
- last minute crash bug removed in VST Mac
- works in Renoise
Further issues?
#---
Also, for the brave among Win users, this one:
http://www.u-he.com/Z2MKL2.zip (dll only)
- does it work?
- does it sound right?
- is it faster? (especially on high Oscillator Resolution settings)
Later,
Urs-
- KVRAF
- 2875 posts since 28 Jan, 2004 from Da Nang, Vietnam
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
Huh? - While you load the patch?!? Must try...kuniklo wrote:Skin reverts to the default when loading any patches from aupresets in Live 7.
-
- KVRAF
- 2685 posts since 14 Jul, 2005 from Australia
Hey Urs, very nice new version, the new skin is amazing!
Vintage2 now seems to be fixed also.
My questions / comments...
- Is there a way to make the default preset the init preset with this version? It seems to load up a patch instead.
- Which supersaw is this version using?
- Found one little bug, when switching to Dark Horse skin and going back to the Synthesis page, it shouws the SB-1 and SB-2 modules even if you haven't used them. You can then click on an item in your chain to refresh the view which hides them again
- The looks options don't seem to save the skin size, only the type
Cheers
Fots
Vintage2 now seems to be fixed also.
My questions / comments...
- Is there a way to make the default preset the init preset with this version? It seems to load up a patch instead.
- Which supersaw is this version using?
- Found one little bug, when switching to Dark Horse skin and going back to the Synthesis page, it shouws the SB-1 and SB-2 modules even if you haven't used them. You can then click on an item in your chain to refresh the view which hides them again
- The looks options don't seem to save the skin size, only the type
Cheers
Fots
-
Echoes in the Attic Echoes in the Attic https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=180417
- KVRAF
- 12037 posts since 12 May, 2008
The 'make default' command doesn't seem to do anything. Is it supposed to make the current skin the default every time you load it?
With both the VST and AU version, when I change to the dark horse skin, make it default, and then close it, it reverts to the original skin when I load Zebra again.
This is RC2.
oh and also the extra modules at first in the default patch, left over from RC1.
With both the VST and AU version, when I change to the dark horse skin, make it default, and then close it, it reverts to the original skin when I load Zebra again.
This is RC2.
oh and also the extra modules at first in the default patch, left over from RC1.
-
- u-he
- Topic Starter
- 30206 posts since 8 Aug, 2002 from Berlin
Yeah, the SideBand modules mysteriously appear only when you switch to the Dark Horse. They disappear after any action in the Grid. I havn't yet found out how the skin has to be modified to start without this glitch, but I'll post the solution in my tech blog and update the files with the then-next version.Echoes in the Attic wrote:The 'make default' command doesn't seem to do anything. Is it supposed to make the current skin the default every time you load it?
With both the VST and AU version, when I change to the dark horse skin, make it default, and then close it, it reverts to the original skin when I load Zebra again.
This is RC2.
oh and also the extra modules at first in the default patch, left over from RC1.
Other than that things work fine here, so it's probably a problem with file permissions. It might help to Repair Permissions (assuming you have admin rights on your machine) or even to simply copy Zebra2.component from MacHD/Library/Audio/Plug-Ins/Components/ to MacHD/Users/You/Library/Audio/Plug-Ins/Components/