MuTools

pquenin · Post by **pquenin** » Tue Dec 20, 2011 8:34 am

funk01 wrote:Does anyone know where I can find the choose target module feature that used to be in the file section in M3.

funk01

Maybe you are speaking of this :

mutools wrote: The target module is always defined by the tracks.
This is done by drag-dropping a module (eg a rack) onto one of the track panels at the left side of the composer.
Untargetted tracks should not play anything.

MuTools · Post by **MuTools** » Tue Dec 20, 2011 8:40 am

Bonteburg wrote:routing Osc 1 through Filter 1 down to the amplifier affects the sound, even if the Filter isn't activated. Maybe it acts as an amplifier even when the filter functionality is turned off.

When a filter is OFF, it bypasses the sound. Same for the RM.
That should explain what you're hearing.

When OFF a filter does not amplify the sound.
But maybe you have routed Osc 1 to the filter and to the amp, which gives a double signal which sounds louder.

pquenin · Post by **pquenin** » Tue Dec 20, 2011 12:18 pm

mutools wrote:
Bonteburg wrote:routing Osc 1 through Filter 1 down to the amplifier affects the sound, even if the Filter isn't activated. Maybe it acts as an amplifier even when the filter functionality is turned off.
When a filter is OFF, it bypasses the sound. Same for the RM.
That should explain what you're hearing.

When OFF a filter does not amplify the sound.
But maybe you have routed Osc 1 to the filter and to the amp, which gives a double signal which sounds louder.

MuSynth : ok, so when something is OFF, it bypasses the sound...

MuDrum : can you tell me how to unload something you have loaded in the Element 3 ?

Trancit · Post by **Trancit** » Tue Dec 20, 2011 12:30 pm

pquenin wrote: MuDrum : can you tell me how to unload something you have loaded in the Element 3 ?

Afaik, best way atm is to save the empty element first for future use in your user library...I guess that would be handy for the simple Element 1 and 2 as well, while you only have to save one (because they are identical)

Perhaps Jo will implement later a command to clear an element, but with user presets it works ok...

pquenin · Post by **pquenin** » Tue Dec 20, 2011 1:17 pm

Trancit wrote:
pquenin wrote: MuDrum : can you tell me how to unload something you have loaded in the Element 3 ?
Afaik, best way atm is to save the empty element first for future use in your user library...

it's a good trick, thanks....

sorohanro · Post by **sorohanro** » Thu Dec 22, 2011 6:56 pm

Merry Christmas or Happy Holidays for who prefer that way

I'll be out for a while, no internet, so I make all the greetings now. All the best and hope we'll see each other and share music made with M4

MuTools · Post by **MuTools** » Thu Dec 22, 2011 7:12 pm

mutools wrote:I'm going to invest some time to do some initial multi-core experiments because i think at this point it's too important to have some clue how much time it will take and which are the main challenges. I know i have been constructing things quite MC aware, so now i want to give it a first practical try...

Ok, back from an initial plunge into the multi-core sea.
Could do some very interesting experiments, and got a first prototype working.
Unfortunately it turned out that when tested on another system, it was not giving the same stable results, so that made clear it needs more R&D time.
But the good news is, we're a nice step closer. And i'm eager to complete this adventure

To be continued after the M4 release.

MuTools · Post by **MuTools** » Thu Dec 22, 2011 7:17 pm

sorohanro wrote:Merry Christmas or Happy Holidays for who prefer that way
I'll be out for a while, no internet, so I make all the greetings now. All the best and hope we'll see each other and share music made with M4

Thanks sorohanro

The same to you!
Wish you and all other Musers a warm and joyful Christmas weekend

Bonteburg · Post by **Bonteburg** » Thu Dec 22, 2011 7:38 pm

Prettige Kerstdagen!

Nielzie · Post by **Nielzie** » Thu Dec 22, 2011 7:43 pm

Hele fijne kerstdagen gewenst! / Have a very nice Christmas!

janamdo · Post by **janamdo** » Thu Dec 22, 2011 8:01 pm

Fijne kerstdagen ..Happy New Year !

pquenin · Post by **pquenin** » Thu Dec 22, 2011 8:22 pm

Joyeux Noël et bonne année à tous les amis de Mulab !

MuTools · Post by **MuTools** » Fri Dec 23, 2011 12:03 pm

The newest MuLab 4.0.79 is available in http://www.mutools.com/mulab/cedar

What's changed:

* Further finetuned graphics (rack slots, knob, ...). Thanks Calum!
* OSX: When doing Audio Setup, the PreferredAudioRecordingLatencyCompensation preference wasn't preserved.
* Windows: Launching MuLab by MuSession now properly works. E.g. drop a MuSession on the MuLab app icon now works.
* When audio files need to be resampled, and an existing resampled version already existed, MuLab asked to overwrite the file. Now the resampled file is overwritten automatically. (not the original of course)
* Drawing in a waveform now preserves the waveform's source file path and so you can still scroll to the previous/next waveform.
* When opening a MuSynth device, couldn't scroll thru waveforms until one was explicitly chosen. Similar when inserting a oscilator in a MuX. All fixed.
* MuX play/deep editors now have a button to show the deep/play editor i.e. the other editor.
* Oscillators now have the option to start at fixed start phase from 0 to 359 degrees. See Oscillator context menu -> Edit Properties.

Nielzie · Post by **Nielzie** » Fri Dec 23, 2011 12:25 pm

Thanks! Who's Calum by the way? I noticed he/she is mentioned quite frequently in the change logs

Trancit · Post by **Trancit** » Fri Dec 23, 2011 4:28 pm

mutools wrote:The newest MuLab 4.0.79 is available in http://www.mutools.com/mulab/cedar

What's changed:

* Further finetuned graphics (rack slots, knob, ...). Thanks Calum!

Now you produced a graphic bug...

Modules in the MUX (either in the deep or in the play editor) don't get greyed out, if processing is turned off...not good

mutools wrote:* Oscillators now have the option to start at fixed start phase from 0 to 359 degrees. See Oscillator context menu -> Edit Properties.

Thx very much for this...very usefull for harder attacks in unison sounds...

But atm I don't know how to translate the degree values...
For my understanding (e.g. a simple sine wave):
0 deg. = startpoint
90 deg. = first max of the wave
180 deg. = second zero crossing
270 deg. = minus max of the wave
359 deg. = short period before the wave ends...

Is that correct so far???

MuTools

KVR Audio

M4 Test