Things you would love to see happening in Bitwig
-
- KVRian
- 911 posts since 10 Dec, 2013
Is it possible to create dummy automation clips on sends/buses/master etc. in the clip launcher view? I've tried setting up a clip on the master channel to automate some filter cutoff and stuff but as soon as I launch it it stops all the audio coming through. Anyone know a way round this? Obviously once you're in the arrangement timeline it's all good but it would be nice to launch FX clips while messing around in clip view.
-
- KVRist
- 260 posts since 27 Aug, 2004 from Berlin
you can convert the mater track to an instrument or hybrid track (its an audio track by default). then you can just add a note clip, which doesn't cut off the incoming audio the way audio clips do. You can of course also use the notes there as input to effects on the master track..Hez wrote:Is it possible to create dummy automation clips on sends/buses/master etc. in the clip launcher view? I've tried setting up a clip on the master channel to automate some filter cutoff and stuff but as soon as I launch it it stops all the audio coming through. Anyone know a way round this? Obviously once you're in the arrangement timeline it's all good but it would be nice to launch FX clips while messing around in clip view.
-
- KVRer
- 5 posts since 29 Mar, 2014
I signed up to KVR to post this, loving Bitiwg atm, though it's not quite polished enough for me to switch yet, here's my FRs:
1- Fading and stretching in the arrange view
2- Crossfades
3- Midi velocity fades in arrange
4- Dual edge resizing / stretching for adjacent clips
5- Middle click should be used navigation of device chains, but when in modulation mode middle clicking on a parameter will have the same behaviour as left clicking - needs fixing
6- Mode for snap only to grid (no "floating" halfway between grid lines)
7- Multiple outputs on tracks (see Reaper)
8- more flexible track height
9- some sort of arrangement tool (like Reason's blocks, or Reaper's regions)
10- Selectable oscillators in FM-4 (ie. saw, square etc.)
11- Better tool shortcuts, you can't hot switch via holding one of the numbers and use a modifier at the same time (ie. shift for disabling snap)
12- Ability to save in demo mode (remove the ability to load projects, so you don't end up losing ideas but are still compelled to buy the software, possibly even more so because you would be able to open all your projects again)
13- Option to change behaviour so all knobs/faders etc. can be adjusted via dragging vertcally - horizontal dragging really wierds me out
14- Track folders and track grouping (faders, pan, mute solo etc.)
15- Change gain/velocity of clips in arrange
16- Envelope MOD - triggered via midi, option for mono or polyphonic modulation
17- Multiple plugin outputs
Sorry that's quite a long list, lots of them are little niggles that I can probably live with, but it'd be great to see some of this stuff implemented
1- Fading and stretching in the arrange view
2- Crossfades
3- Midi velocity fades in arrange
4- Dual edge resizing / stretching for adjacent clips
5- Middle click should be used navigation of device chains, but when in modulation mode middle clicking on a parameter will have the same behaviour as left clicking - needs fixing
6- Mode for snap only to grid (no "floating" halfway between grid lines)
7- Multiple outputs on tracks (see Reaper)
8- more flexible track height
9- some sort of arrangement tool (like Reason's blocks, or Reaper's regions)
10- Selectable oscillators in FM-4 (ie. saw, square etc.)
11- Better tool shortcuts, you can't hot switch via holding one of the numbers and use a modifier at the same time (ie. shift for disabling snap)
12- Ability to save in demo mode (remove the ability to load projects, so you don't end up losing ideas but are still compelled to buy the software, possibly even more so because you would be able to open all your projects again)
13- Option to change behaviour so all knobs/faders etc. can be adjusted via dragging vertcally - horizontal dragging really wierds me out
14- Track folders and track grouping (faders, pan, mute solo etc.)
15- Change gain/velocity of clips in arrange
16- Envelope MOD - triggered via midi, option for mono or polyphonic modulation
17- Multiple plugin outputs
Sorry that's quite a long list, lots of them are little niggles that I can probably live with, but it'd be great to see some of this stuff implemented
-
- KVRer
- 11 posts since 22 May, 2004
AU support
Multitimbral Instrument Support
Fade in/out
Multitimbral Instrument Support
Fade in/out
-
- KVRAF
- 4265 posts since 21 Oct, 2001 from my bolthole in the south pacific
How about some demo projects that can be downloaded for people giving the demo a whirl, for starters?
"I got a car battery and two jumper cables that argue different."
Rust Cohle
Rust Cohle
-
- KVRist
- 44 posts since 2 Apr, 2013
I work with win 8 64bit, running 32bit Synthmaster (but tried 64bit ,too). The problem: Bitwig finds Synthmaster, you can load it, but the Waveforms get changed on most of the presets. It seems specially sequenced and arpegiated presets are affected.
Shit! Hope Sampletank 3 comes out soon!
Told the problems the support. No answer till yet....
Nr4 would be to good to become true. Don´t think it will ever be planned.....
Shit! Hope Sampletank 3 comes out soon!
Told the problems the support. No answer till yet....
Nr4 would be to good to become true. Don´t think it will ever be planned.....
-
TristanMendoza TristanMendoza https://www.kvraudio.com/forum/memberlist.php?mode=viewprofile&u=325569
- KVRian
- 807 posts since 27 Mar, 2014
something id really like to see in bitwig is
an A-B crossfader
grouping tracks
and more colors because i color code everything!
an A-B crossfader
grouping tracks
and more colors because i color code everything!
-Tristan
MacBook Pro|MacOS Sierra|Bitwig Studio 2.0
UA Apollo Twin| EVE SC207 Monitors|ATH M50x|Focal Spirt Pro|Komplete 10|Push
MacBook Pro|MacOS Sierra|Bitwig Studio 2.0
UA Apollo Twin| EVE SC207 Monitors|ATH M50x|Focal Spirt Pro|Komplete 10|Push
- KVRAF
- 6539 posts since 9 Dec, 2008 from Berlin
Wow, that is weird. The whole Synthmaster GUI feels very sluggish too and I see what you mean with the waveforms. I'll report it too, so hopefully it can be fixed fast.servolenkung wrote:I work with win 8 64bit, running 32bit Synthmaster (but tried 64bit ,too). The problem: Bitwig finds Synthmaster, you can load it, but the Waveforms get changed on most of the presets. It seems specially sequenced and arpegiated presets are affected.
Shit! Hope Sampletank 3 comes out soon!
I hardly ever use Synthmaster so this slipped through...
Yeah, I hope IK is getting their stuff together this time. Although I'm not very confident about their overall dedication and not sure if I will update. There's more interesting plugins to be had these days as far as I'm concerned.
Cheers,
Tom
"Out beyond the ideas of wrongdoing and rightdoing, there is a field. I’ll meet you there." · Rumi
UrbanFlow.art · Instagram · YouTube
UrbanFlow.art · Instagram · YouTube
-
- KVRist
- 168 posts since 18 Mar, 2004
Rex support and Rewire
MIDI routing
Group tracks
Separate device lists for instruments and plugins (having everything together is a confusing mess)
Track templates
Media selection and syncing features like Reaper's media explorer
Being able to host Bitwig as a plugin!
Fades
Full vertical track zoom
Multiout instrument support
Sample selection feature in drum sampler for creating "128s"
Fast development with numerous bug fixes and new features regularly like Cockos, not like Steinberg or Ableton (so far so good).
MIDI routing
Group tracks
Separate device lists for instruments and plugins (having everything together is a confusing mess)
Track templates
Media selection and syncing features like Reaper's media explorer
Being able to host Bitwig as a plugin!
Fades
Full vertical track zoom
Multiout instrument support
Sample selection feature in drum sampler for creating "128s"
Fast development with numerous bug fixes and new features regularly like Cockos, not like Steinberg or Ableton (so far so good).
-
- KVRAF
- 9521 posts since 6 Oct, 2004
The SM gui is always sluggish in linux-wine when not using bitwig,ThomasHelzle wrote:The whole Synthmaster GUI feels very sluggish too
so it may be SM gui issue more than a bitwig issue.
U-he, NI, IK gui don't lag, on the same system.
Cheers
- KVRAF
- 4805 posts since 21 Jan, 2008 from oO
I would like to see:
-a track delay( always use that for basslines )
-then a marker track for the arrangeview. ( ah, there are these cue markers, thats fine..nice!)
-proper panning like in cubase (putting the tool plugin on every track just for panning is not super cool imo)
-surround Output (since its aimed for sound design, would be great..also for game sound designers etc)
-custom shortcuts
more added later
and the other stuff you guys mentioned
-a track delay( always use that for basslines )
-then a marker track for the arrangeview. ( ah, there are these cue markers, thats fine..nice!)
-proper panning like in cubase (putting the tool plugin on every track just for panning is not super cool imo)
-surround Output (since its aimed for sound design, would be great..also for game sound designers etc)
-custom shortcuts
more added later
and the other stuff you guys mentioned
JamWide - a cross-platform Ninjam client for DAWs
