KVR Audio

xphen0m · Post by **xphen0m** » Mon Nov 02, 2015 1:00 am

I bought it. I don't like how I can't copy and paste settings from a module in Chain A to it's Chain B counterpart.

edit: this might be a bug.....at first it wasn't working for Amps nor Cabs....now it's working for Cabs but still not for amps.

dwozzle · Post by **dwozzle** » Mon Nov 02, 2015 1:19 am

Pasting stomp, amp, and rack settings worked right off for me. At first I thought pasting cab/mic settings didn't, then I thought it did, then I thought it worked sometimes and not others, but now I think I get what you need to do to paste: Left click on the cab itself, then right click to bring up the copy/paste/etc menu. Seems like you need that first click to bring the focus to the cab, or something. Not sure if that's intended behavior or a bug.

Very cool that you can do this.

Christian_D · Post by **Christian_D** » Mon Nov 02, 2015 1:45 am

monkeymanx wrote:

I put together a video going through my hi gain presets if you are into that kind of sound. I'm really enjoying this now. Still would like some fancy reverb pedals though and a hi pass / low pass filter built into the cab section. Granted you can move the microphone away from the cone to tame the high frequency too or just do it within your host.

Just to note, the new Marshalls are pretty good if you are into that kind of thing. The new Marshall cabs are really good sounding too.

Hey cool tune sounds awesome! You really know how to get a good metal tone.

Could you upload and share some of these? These high gain tones are right up my alley so to speak, I've got an older Ibanez 7-string with seymour duncans SH-6's (for 7-string) that might work well with these.

I can pretty much get the drift of what you're doing from the video but it would be cool to load these up in AT4!

monkeymanx · Post by **monkeymanx** » Mon Nov 02, 2015 1:46 am

I noticed you have to not have the cab matching on in order to paste so if you are not able to paste cab settings check that.

monkeymanx · Post by **monkeymanx** » Mon Nov 02, 2015 1:48 am

Christian_D wrote:
monkeymanx wrote:

I put together a video going through my hi gain presets if you are into that kind of sound. I'm really enjoying this now. Still would like some fancy reverb pedals though and a hi pass / low pass filter built into the cab section. Granted you can move the microphone away from the cone to tame the high frequency too or just do it within your host.

Just to note, the new Marshalls are pretty good if you are into that kind of thing. The new Marshall cabs are really good sounding too.
Hey cool tune sounds awesome! You really know how to get a good metal tone.

Could you upload and share some of these? These high gain tones are right up my alley so to speak, I've got an older Ibanez 7-string with seymour duncans SH-6's (for 7-string) that might work well with these.

I can pretty much get the drift of what you're doing from the video but it would be cool to load these up in AT4!

I'm not sure if IK has the patch sharing section for AT4 or not yet. Next time I'm on my comp I will check it out and share away. I need to do some volume matching on the patches though to get them at an even peak.

Christian_D · Post by **Christian_D** » Mon Nov 02, 2015 2:18 am

That's right last I checked it was still for AT3. That definitely would be appreciated. When you go through them in the video it's like different colors of awesome! This update is cool having fun with it.

xphen0m · Post by **xphen0m** » Mon Nov 02, 2015 2:56 am

dwozzle wrote:Pasting stomp, amp, and rack settings worked right off for me. At first I thought pasting cab/mic settings didn't, then I thought it did, then I thought it worked sometimes and not others, but now I think I get what you need to do to paste: Left click on the cab itself, then right click to bring up the copy/paste/etc menu. Seems like you need that first click to bring the focus to the cab, or something. Not sure if that's intended behavior or a bug.

Very cool that you can do this.

I can't paste amp settings at all. It's greyed out.

edit: There's definitely some inconsistency with copy-and-pasting AMP and CAB settings.

J4R1O · Post by **J4R1O** » Mon Nov 02, 2015 11:43 am

Okey, the introductory offer has now expired while I was waiting IK support to solve my issue.

As I wrote on my previous post I had some issues with my Bonus Points (Jam Points) and Peter told me I should raise a support ticket and that's what I did: I raised two IK support tickets, one to US support (because it was friday and I live in Europe) and one to Italy (yesterday) and I clearly stated that I'm willing to buy AT4 for 99,99 € (+ VAT) but I would like to know the issue with my Bonus Points because I could only redeem 11 even they had gave me 20.

Still no reply, but it's too late now. Not gonna buy it for 150 €

DarkStar · Post by **DarkStar** » Mon Nov 02, 2015 11:49 am

^^^^
Do not give up hope.

As you had raised a Support Ticket within the GB timescale, I would pursue that with Support (they do not normally work over the week-end).

Burillo · Post by **Burillo** » Mon Nov 02, 2015 11:53 am

IK support was always accomodating for things like these. just wait for support to reply to you, explain the situation and i'm sure you'll get the price you were looking for.

Vasya Mishchenko · Post by **Vasya Mishchenko** » Mon Nov 02, 2015 12:43 pm

Burillo wrote:IK support was always accomodating for things like these. just wait for support to reply to you, explain the situation and i'm sure you'll get the price you were looking for.

...or just f**k IK off

as they seem to do the same all the time

xphen0m · Post by **xphen0m** » Mon Nov 02, 2015 2:49 pm

It looks like I gained absolutely no JamPoints by buying AT4.

Funkybot's Evil Twin · Mon Nov 02, 2015 3:44 pm

xphen0m wrote:It looks like I gained absolutely no JamPoints by buying AT4.

Where are you looking? I logged onto my IK Account, went into the User Area, selected "Jampoints" from the menu, and at the very top of the page, under "Your Products," it shows: Amplitube 4 (Download Only), Generated on 30/10/2015, $8.

That means I got $8 in Jampoints for that purchase (not bad considering I used $30 in Jampoints and as a result only spent $70 upgrading). Do you see something different?

Peter - IK Multimedia · Mon Nov 02, 2015 3:55 pm

J4R1O wrote:Okey, the introductory offer has now expired while I was waiting IK support to solve my issue.

As I wrote on my previous post I had some issues with my Bonus Points (Jam Points) and Peter told me I should raise a support ticket and that's what I did: I raised two IK support tickets, one to US support (because it was friday and I live in Europe) and one to Italy (yesterday) and I clearly stated that I'm willing to buy AT4 for 99,99 € (+ VAT) but I would like to know the issue with my Bonus Points because I could only redeem 11 even they had gave me 20.

Still no reply, but it's too late now. Not gonna buy it for 150 €

Like others have said and I stated on our forum, they will help you. Your ticket was put in right before the weekend, you should expect a reply today. I'm sure they'll take care of you.

Tellfit · Post by **Tellfit** » Mon Nov 02, 2015 4:12 pm

I have bought amplitube 4 on 10/29/2015 and use 14 jampoints but when i make the payment with paypal i pay the full price without the discount and now i have lost the 14 jampoint
I have wrote to support the same day and i never receive answer.
Could you help me Peter

Thanks

Amplitube 4 is here!!!!! ......well almost.....