KVR Audio

hyakken · Post by **hyakken** » Thu Dec 08, 2016 8:42 am

jbuonacc wrote:
Numanoid wrote:The SamplePlayer looks like an alternative to TAL Sampler

any idea what happened to this one? it doesn't look like it's available any more. i see from his blog that it was updated to V2 with the new GUI, but that's not available either.

I'm making new version of that one.
Until finishing it, it's not available.
Sorry about that.

jbuonacc · Post by **jbuonacc** » Thu Dec 08, 2016 8:58 am

sounds good, thanks!

btw - i really like the new knobs and buttons.

sinkmusic · Post by **sinkmusic** » Thu Dec 08, 2016 10:21 am

hyakken wrote:I changed button stuff like below.

It looks wonderul, imho

MillerSam · Post by **MillerSam** » Thu Dec 08, 2016 12:19 pm

HY Plugins just released HY-Filter 2

Looks really interesting

http://www.synthanatomy.com/2016/12/hy- ... multi.html

HY Filter .jpg

Multi-Filter (This filter mode contains 4 filter(SVF, Formant, Telephone, Comb).
Reso-Filter ( parallel connected resonant filters, basic structure is based on MAM RS3)
Step-Filter (You can control 7 parameters by step sequencer)
Filter-Bank (Moog 914 type filter bank(12 bandpass + LP/HP))
X-Over Filter (Crossover filter splits input signal into 3 band. You can process each band independently.)
Stereo-Filter (2/4 pole lowpass filters which can be controlled independently)
Gate-Filter (You can control gates of filter inputs by grid sequencer)

Tom
Synth Anatomy

.jon · Post by **.jon** » Thu Dec 08, 2016 12:23 pm

hyakken wrote: I changed button stuff like below.
I have made many kind of 3d buttons, so it's a bit disappointing.
But it looks like simple flat button is better than my 3d buttons.
I will make new gui design in this way(3d knob and flat button).

That looks very good!

Kr3eM · Post by **Kr3eM** » Thu Dec 08, 2016 12:50 pm

hyakken wrote: I changed button stuff like below.
I have made many kind of 3d buttons, so it's a bit disappointing.
But it looks like simple flat button is better than my 3d buttons.
I will make new gui design in this way(3d knob and flat button).

I know that feeling of disappointment when one has put in a lot of effort and the result does not turn out to be as great as one had in mind. I have to give respect to you for your ability to use your discernment in a situation like this one. Many people lack this skill.

On the other hand I would say there's really no need to feel any disappointment.
I assume you started with the intention to improve the look and feel of the GUI, so with that in mind you did not fail, it looks very good and now you know it.

If you had not done all the work and tried it with the 3d buttons you would most likely still have doubts...and there would be no true knowing what looks better and therefore no real peace of mind or completion.

[ insert my (Keirei) 45° "Respect" Bow here ]

Jonathan Shepherd · Post by **Jonathan Shepherd** » Thu Dec 08, 2016 4:19 pm

Hey Tadashi has this been announced to KVR front page? I may have missed it---

jbuonacc · Post by **jbuonacc** » Thu Dec 08, 2016 5:40 pm

hyakken wrote:I changed button stuff like below.
I have made many kind of 3d buttons, so it's a bit disappointing.
But it looks like simple flat button is better than my 3d buttons.
I will make new gui design in this way(3d knob and flat button).

(pic of HY-Delay)

i really like this design with the flat buttons.

fairplay · Post by **fairplay** » Thu Dec 08, 2016 6:22 pm

My vote for flat buttons, beveled gradient is soooo last century.

sinkmusic · Post by **sinkmusic** » Thu Dec 08, 2016 8:31 pm

Hi
A couple cosmetics suggestions for HyFilter2 : I enjoy the wavedisplay, but something which i am even more nuts about is a filter curve display, just like with Tone2 Filterbank, Waves Metafilter or Cytomic The Drop : do you think it is something which could be implemented as an alternate view in future versions ?

Also, unless i'm wrong, it seems that the envelope display is pre-filter, while post-filter displaying might be more useful ?

hyakken · Post by **hyakken** » Fri Dec 09, 2016 8:37 am

Jonathan Shepherd wrote:Hey Tadashi has this been announced to KVR front page? I may have missed it---

KVR front page means news headlines?
I actually don't know it has been announced or not, but I made news article and published it.

sinkmusic wrote:Hi
A couple cosmetics suggestions for HyFilter2 : I enjoy the wavedisplay, but something which i am even more nuts about is a filter curve display, just like with Tone2 Filterbank, Waves Metafilter or Cytomic The Drop : do you think it is something which could be implemented as an alternate view in future versions ?
[img]<span%20class="skimlinks-unlinked">http://i.imgur.com/SRJMxNo.png</span>[/img]

Also, unless i'm wrong, it seems that the envelope display is pre-filter, while post-filter displaying might be more useful ?

I haven't figured out how to make filter graph yet.
But I want to add it sooner or later.

sinkmusic · Post by **sinkmusic** » Fri Dec 09, 2016 9:32 am

nice, thank you.

hyakken · Post by **hyakken** » Sun Dec 18, 2016 1:06 am

Hello,

I just released v1.3.
Thank you for all those suggestions.
Now all delay modes have new GUI graphics.
Please check it.
http://hyakken.moo.jp/WordPress/hy-delay2-v1-3/

I will update filter gui next,
Then will release sequencer next year.

Thank you

murnau · Post by **murnau** » Sun Dec 18, 2016 1:10 am

Looks and sounds awesome! Thank you!

Jonathan Shepherd · Post by **Jonathan Shepherd** » Sun Dec 18, 2016 8:35 am

Thank you Tadashi. A sequencer eh? Is it based on one of your M4L sequencers?

Hyakken is the HY dev !